JetStream 12-Port 10GBase-T Smart Switch with 4 10G SFP+ Slots

  • Equipped with 12 10GBase-T RJ45 Ports and 4 10G SFP+ Fiber Ports, providing 320Gbps Switching Capacity
  • 10GBase-T Technology provides a cost-effective method for migrating from current network to 10G Ethernet by utilizing existing CAT5e/CAT6 short connections (up to 55m) and CAT6A/CAT7 connections (up to 100m).
  • L2+ feature, Static Routing help route internal traffic for more efficient use of network resources
  • Advanced security features include IP-MAC-Port Binding, ACL, Port Security, DoS Defend, Storm Control, DHCP Snooping, 802.1X, and Radius Authentication
  • Comprehensive IPv6 support for management, QoS and ACL
  • WEB/CLI managed modes, SNMP, RMON enhance management
  • Dual Firmware Image improves reliability and up-time of your network

Affordable 10-Gigabit Switching Solution for Growing SMBs

 T1700 Series 10G Smart Switches

In a world of expanding enterprises and growing virtualization, cloud-based services and applications, like VoIP, HD streaming video, and IP surveillance, SMB networks need to evolve beyond simple reliability to provide increased scalability, higher bandwidth, and enhanced performance. TP-LINK’s new T1700 Series 10G Smart Switches represent an ideal solution that meets these requirements. The series includes the T1700X-16TS Full 10-Gigabit Smart Switch and the T1700G-28TQ Gigabit Stackable Smart Switch with 10G Uplink, which both provide high levels of performance, scalability, and cost-effectiveness that SMBs require from their 10G networking solutions.



 12-Port 10GBase-T Smart Switch
with 4 10G SFP+ Slots


10GBase-T Technology

Until recently, 10-Gigabit connectivity was available only in the expensive fiber based technology that supports high-speed access to the network backbone or data center environment.

Today, 10GBase-T Technology is becoming more common and affordable. Low-Latency, Line-Rate 10G Copper Base-T is backward compatible with Fast Ethernet and Gigabit Ethernet and can automatically negotiate between higher and lower speed connections. Most importantly, 10GBase-T provides a cost-effective method for migrating from your current network to 10G Ethernet by utilizing your existing CAT5e/CAT6 RJ-45 short connections (up to 55m) and CAT6A/CAT7 connections (up to 100m). This reduces cabling complexity and ultimately results in significant savings for customers.

16 10-Gigabit Ports,
320Gbps Switching Capacity

The T1700X-16TS features 12 10GBase-T RJ45 ports and four dedicated SFP+ fiber slots, which can support up to 320Gbps of combined switching bandwidth. This provides great resiliency, relieves congestion associated with bandwidth-intensive applications, and guarantees smooth data transmission.



 24-Port Gigabit Stackable Smart Switch
with 4 10GE SFP+ Slots

Physical Stacking

With True Physical Stacking Technology, up to six T1700G-28TQ units can be stacked with a single IP address.
This provides enhanced scalability, simple management, and increased redundancy for high-density deployment. It also supports efficient network expansion in the future.

  • 6 Units

    True Physical Stacking Technology of up to six units supports network simplification

  • 144 GE Ports

    Up to 144 Gigabit Ethernet ports per stack

  • 24 10G SFP+

    Up to 24 10G SFP+ slots per stack

  • 768 Gbps

    Up to 768Gbps of switching capacity for aggregated networks

  • 1 Management IP

    With all units identified by a single IP address, configuring and monitoring the stack is easy


Fanless Design for Silent Operation

The T1700G-28TQ utilizes a fanless design, which reduces the amount of ambient noise in your office. Removing the fan also reduces power consumption and helps you build a more cost-effective network.

Software Features

  • L2+ Static Routing

    Simple network segmentation, with internal routing through the switch, allows devices in different VLANs/subnets to communicate with each other and makes the flow of network traffic more efficient.

  • Abundant L2 Features

    T1700 Series devices are equipped with a full lineup of L2 features that meet your current and future needs for unified networking and mobility.

    802.1Q/MAC/Protocol/Private VLAN1

    Link Aggregation Group (LAG)

    IGMP & MLD Snooping

    Multicast VLAN

  • Robust Security Strategies

    Support for numerous security strategies allow you to create a secure, unified network by preventing unauthorized access, external attacks, and malware infiltration.

    Access Control List (ACL)

    DHCP Snooping

    802.1x Authentication

    IP-MAC-Port Binding

  • Comprehensive QoS Features

    Advanced controls provide optimized network performance and efficient delivery of time-sensitive traffic.

    Port-Based or 802.1p-Based Prioritization

    Layer 3-Based (DSCP) Prioritization

    Rate Limit

    Voice VLAN

  • IPv6 Support

    The T1700 Series offers comprehensive IPv6 features, including IPv6 management, Static Routing, ACL, and QoS2, which ease the transition to an IPv6-based network and protect the value of your investment.

  • Dual Image

    Dual image firmware reduces downtime when the firmware is being updated. The backup image will also be activated in the event that any error occurs on the active image.

1 Only T1700X-16TS supports Private VLAN

2 IPv6 Static Routing/ACL/QoS will be supported in a future firmware release

Hardware Specifications

  T1700X-16TS T1700G-28TQ
10/100/1000Mbps RJ45 Ports - 24
10GBase-T RJ45 Ports 12 -
Uplink 4 Dedicated 10G SFP+ 4 Dedicated 10G SFP+
Switching Capacity 320Gbps 128Gbps
Dimensions(W×D×H) 17.3×8.7×1.73 in.
17.3×7.1×1.73 in.
Fan Quatity Two Smart Fans Fanless
Find More Details Go> Go>


  • 10GBase-SR SFP+ LC Transceiver

    850nm multi-mode transceiver
    300m max distance
    LC/UPC Connector


  • 10GBase-LR SFP+ LC Transceiver

    1310nm single-mode transceiver
    10km max distance
    LC/UPC Connector


  • 1M/3M Direct Attach SFP+ Cable

    1M/3M cable length
    SFP+ connector on both sides

    TXC432-CU1M / TXC432-CU3M

Más >

Casos relacionados

  • Soborka ISP

    TP-Link Helps ISP Soborka Provide Better Service for Subscribers

    Soborka ISP

    TP-Link Helps ISP Soborka Provide Better Service for Subscribers

    “TP-Link’s products offer tremendous value, which allowed us to reduce the cost of updating our large network without compromising performance. Our customers are much more satisfied with the network since the upgrade. It has done a lot to improve our reputation.” —Soborka's CEO
Estándares y Protocolos IEEE 802.3i, IEEE 802.3u, IEEE 802.3ab, IEEE802.3z, IEEE 802.3 an,
IEEE 802.3ae, IEEE 802.3ad, IEEE 802.3x, IEEE 802.1d, IEEE 802.1s,
IEEE 802.1w, IEEE 802.1q, IEEE 802.1x, IEEE 802.1p
Interfaz 12 Puertos RJ45 100/1000/10GBase-T
(Auto Negociación/Auto MDI/MDIX)
4 Ranuras SFP+ 10G
Medios de Red 100BASE-TX/1000Base-T: cables UTP categorías 5, 5e o superior (máximo 100m)
10GBase-T: cables UTP categorías 5e, 6 (máximo 55m) o superior (máximo 100m)
Cantidad de Ventiladores 2 Ventiladores Smart
Bloqueo de Seguridad Físico Yes
Fuente de Alimentación 100-240V, 50/60Hz
Dimensiones 440 * 220 * 44 mm (17.3 * 8.7 * 1.73 in.)
Montaje Rack Mountable
Consumo de Potencia Máximo 76.58W
Max Heat Dissipation 261.29 BTU/h
Capacidad de Conmutación Hasta 320Gbps
Tasa de Reenvío de Paquetes Hasta 238.1Mpps para un switch solo
Tabla de Direcciones MAC 16K
Memoria del Buffer de Paquete 2MB
Jumbo Frame 9KB
Número de Rutas Estáticas 32 IPv4
Número de Interfaces IP 16
Calidad de Servicio Soporta prioridad 802.1p CoS/DSCP
Soporta 8 colas de prioridad
Horario de colas: SP, WRR, SP+WRR
Port/Flow- basado en Límite de Ratio
QoS* IPv6
VLAN de Voz

Características L2 y L2+ Enrutamiento estático
DHCP Relay*
IGMP Snooping V1 / V2 / V3
802.3ad LACP (Hasta 14 grupos de agregación, con 8 puertos por grupo)
Spanning Tree STP / RSTP / MSTP
Filtrado de BPDU / Guardia
Protección TC / Root
Detección de Loopback
Control de flujo 802.3x
VLAN Soporta hasta 4K VLANs simultáneamente (de 4K IDs de VLAN)
VLAN basada en MAC / Protocolo
VLAN privada
Lista de Control de Acceso L2 ~ L4 Filtrado de paquetes basado en la dirección MAC de origen y destino, dirección IP, puertos TCP / UDP
Seguridad AAA *
Seguridad de Puertos
DHCP Snooping
IP-MAC-Puerto Binding
Inspección ARP
Autenticación Radius 802.1x
SSH v1 / v2
SSL v3 / TLSv1
Control de tormentas Broadcast / Multicast / Desconocidas-Unicast
Defensa Dos
IPv6 Doble pila IPv4 / IPv6
Detección de escuchas de multidifusión (MLD)
Detección de vecinos IPv6 (ND)
Descubrimiento de unidad de transmisión máxima de trayecto (MTU)
Protocolo de mensajes de control de Internet (ICMP) versión 6
TCPv6 / UDPv6
Aplicaciones IPv6 Cliente DHCPv6
Telnet (v6)
Gestión Gestión GUI basada en Web y CLI
SNMP v1 / v2c / v3, compatible con MIB públicas y
MIBs privadas de TP-LINK
RMON (1, 2, 3, 9 grupos)
Monitorización de CPU
Port Mirroring
Actualización de firmware: TFTP & Web
Diagnóstico del sistema: VCT
SYSLOG y MIBS públicos
Imagen Dual
Certificaciones CE, FCC, RoHS
Contenido del Paquete T1700X-16TS
Cable de Alimentación
Guía de Instalación
CD de Recursos
Kit de Montaje en Rack
Pies de Goma
Requisitos del sistema Microsoft® Windows® XP, Vista™ or Windows 7,
Windows 8/8.1, MAC® OS, NetWare®, UNIX® o Linux.
Factores Ambientales Temperatura de Funcionamiento: 0℃~40℃ (32℉~104℉);
Temperatura de Almacenamiento: -40℃~70℃ (-40℉~158℉)
Humedad de Funcionamiento: 10%~90%RH sin condensación
Humedad de Almacenamiento: 5%~90%RH sin condensación
*These features will be supported in a future firmware release.

De United States?

Obtener productos, eventos y servicios para su región.