Download voor M7300
Vx.0=Vx.6/Vx.8/Vx.9(eg:V1.0=V1.6/V1.8V1.9)
Vx.x0=Vx.x6/Vx.x8/Vx.x9 (eg:V1.20=V1.26/V1.28/1.29)
Vx.30=Vx.32/Vx.33 (eg:V3.30=V3.32/V3.33)
- Product Overview
- Document
FAQs
- What should I do if the email shows that the link expired when I register cloud account or reset my password?
- 4G 5G Routers (Including Deco, LTE Gateway and MiFi) have no Internet due to 464XLAT technology used by some operators (e.g., Jio, Globe)
- The Weak Security and Privacy Warning on the iOS14 or iOS15
- How to troubleshoot if there is no internet connection when using 4G Mobile Wi-Fi(Case 2)
- How to access Internet via USB cable with 4G Mobile Wi-Fi
- How to upgrade the firmware of 4G Mobile Wi-Fi
- How to configure Data Settings of 4G Mobile Wi-Fi
- How to troubleshoot if there is no internet connection when using 4G Mobile Wi-Fi(Case 1)
- How to block unknown devices by tpMiFi
- How to send SMS by tpMiFi
- How to set data usage limit by tpMiFi
- How to use SD sharing function by tpMiFi
- What are the most frequent asked questions about the 4G Mobile Wi-Fi?
- How do I install a SIM card for my 4G Wi-Fi router or Mobile Wi-Fi?
- What should I do if I failed to log in on tpMiFi App?
- What should I do if PIN is required when I first connect to Mobile WiFi’s wireless network?
- What should I do if the Internet LED doesn’t light up or I cannot access the internet? (Mobile Wi-Fi without screen)
- How to use MiFi in foreign countries?
- How to access the micro SD card of 4G Mobile Wi-Fi via wireless
Firmware
A firmware update can resolve issues that the previous firmware version may have and improve its current performance.
To Upgrade
IMPORTANT: To prevent upgrade failures, please read the following before proceeding with the upgrade process
- Please upgrade firmware from the local TP-Link official website of the purchase location for your TP-Link device, otherwise it will be against the warranty. Please click here to change site if necessary.
- Please verify the hardware version of your device for the firmware version. Wrong firmware upgrade may damage your device and void the warranty. (Normally V1.x=V1)
Hoe vind ik de hardware versie van een TP-Link product? - Do NOT turn off the power during the upgrade process, as it may cause permanent damage to the product.
- To avoid wireless disconnect issue during firmware upgrade process, it's recommended to upload firmware with wired connection unless there is no LAN/Ethernet port on your TP-Link device.
- It's recommended that users stop all Internet applications on the computer, or simply disconnect Internet line from the device before the upgrade.
- Use decompression software such as WinZIP or WinRAR to extract the file you download before the upgrade.
M7300(UN)_V1_151109 |
Download | |
---|---|---|
Publicatiedatum: 2015-11-09 | Taal: Engels | Bestandsgrootte: 35.15 MB |
Modifications and Bug Fixes: First firmware release of M7300_V1. Notes: 1.For M7300_V1 |
Gebruik van Firmware van Derde Partijen in TP-Link Producten
Sommige officiële firmware voor TP-Link producten kunnen vervangen worden door firmware van derde partijen, zoals DD-WRT. TP-Link is niet verplicht hier onderhoud of ondersteunig op te bieden en garandeert ook niet prestaties of stabiliteit van firmware van een derde partij. Schade aan het product door gebruik van firmware van een derde partij zal de garantie doen vervallen.
Open Source Code voor Programmeerders (GPL)
Houd er rekening mee dat: De producten van TP-Link deels software codes bevatten van derde partijen, inclusief software codes naar de GNU General Public Licence (“GPL“), Versie 1/Versie 2/Versie 3 of GNU Lager General Public License ("LGPL"). U kunt de betreffende software voorwaarde gebruiken in lijn met de GPL licentievoorwaarden.
U kunt de betreffende GPL licentievoorwaren hier bekijken, printen en downloaden. U vindt de download van de GPL source codes van de betreffende software in een TP-Link product en meer informatie, inclusief een lijst met TP-Link software voorzien van GPL software codes, onder GPL Code Center.
De betreffende programma's zijn uitgegeven ZONDER ENKELE GARANTIE; Zelfs ZONDER de impliciete garantie van VERKOOPBAARHEID of GESCHIKTHEID VOOR EEN BEPAALDE DOEL. Zie de betreffende GNU See the respective GNU Algemene Openbare Licentie voor meer details.
Apps
- tpMiFi App
- tpMiFi provides the easiest way to access and manage your 4G MiFi product with your iOS or Android devices.
GPL Code
Emulatoren
Firmwareversie |
Working Mode |
Taal |
|
---|---|---|---|
151109 |
- |
Engels |
Note:
1. This Emulator is a virtual web GUI where you can program your TP-Link product firmware. For details about an individual product’s features and specifications please use the search facility and go to the product page.
2. Please check the firmware version corresponds to the version shown on the Emulator interface. Each firmware version has its own GUI and functionality.
3. Please note that not all firmware versions are represented on the Emulator.