Download voor Archer MR500
- Product Overview
FAQs
- How to use Iperf to test the speed on TP-Link routers
- How to configure Reboot Schedule of TP-Link Dual Band 4G LTE Router (new logo)
- How to select 4G band manually on the web interface of LTE Gateway Routers
- TP-Link LTE Router keeps disconnecting
- The Weak Security and Privacy Warning on the iOS14 or iOS15
- What should I do if my TP-Link 4G LTE Router cannot detect SIM card?
- How to check the 4G band working on our smartphones
- Troubleshooting guide of no internet access with TP-Link Wireless 4G LTE Router working as 3G/4G Router Mode
- No internet connection when using TP-Link Wireless 4G LTE Router working as 3G/4G Router Mode(Case 2)
- No internet connection when using TP-Link Wireless 4G LTE Router working as 3G/4G Router Mode(Case 1)
- What should I do if no APN profile or wrong APN profile is detected by TP-Link Wireless 4G LTE Router?
- Several questions about the OneMesh™ and Mesh
- How to Set up TP-Link Wireless 4G LTE Router on Tether App
- How to log into the web-based management interface of TP-Link Wireless 4G LTE Router
- How to make Xbox online games run smoothly by UPnP with TP-Link Wireless Dual Band 4G LTE Router (new logo)
- How to configure Parental Controls with TP-Link Wireless Dual Band 4G LTE Router (new logo)
- How to upgrade the firmware of TP-Link Wireless Dual Band 4G LTE Router (new logo)
- How to configure Access Control with TP-Link Wireless Dual Band 4G LTE Router (new logo)
- How to configure IP&MAC Binding with TP-Link Wireless Dual Band 4G LTE Router (new logo)
- How to make applications free from port restriction by DMZ with TP-Link Wireless Dual Band 4G LTE Router (new logo)
- How to set up DDNS (NO-IP) of TP-Link Wireless Dual Band 4G LTE Router (new logo)
- How to set up DDNS (Dyndns) of TP-Link Wireless Dual Band 4G LTE Router (new logo)
- How to share local resources on the Internet by Virtual Servers with TP-Link Wireless Dual Band 4G LTE Router (new logo)
- How to use QoS on TP-Link Wireless Dual Band 4G LTE Router (new logo)
- How to set up TP-Link DDNS on TP-Link Wireless Dual Band 4G LTE Router (new logo)
- How to set up Ipv6 tunnel on TP-Link Wireless Dual Band 4G LTE Router (new logo)
- How to set up an OpenVPN connection with TP-Link Wireless Dual Band 4G LTE Router (new logo)
- How to set up a PPTP VPN connection with TP-Link Wireless Dual Band 4G LTE Router (new logo)
- How to upgrade the ISP information of TP-Link Wireless Dual Band 4G LTE Router (new logo)
- How to reset TP-Link Wireless 4G LTE Router to factory defaults
- How to troubleshoot if remote management does not work on LTE Gateway Router with 3G/4G Router mode
- How to set up Wireless Router mode and 3G/4G Backup on TP-Link LTE Gateway
- How do I install a SIM card for my 4G Wi-Fi router or Mobile Wi-Fi?
- How to Configure OneMesh Wireless Network on TP-Link Wireless Dual Band 4G LTE Router Archer MR600
Firmware
A firmware update can resolve issues that the previous firmware version may have and improve its current performance.
To Upgrade
IMPORTANT: To prevent upgrade failures, please read the following before proceeding with the upgrade process
- Please upgrade firmware from the local TP-Link official website of the purchase location for your TP-Link device, otherwise it will be against the warranty. Please click here to change site if necessary.
- Please verify the hardware version of your device for the firmware version. Wrong firmware upgrade may damage your device and void the warranty. (Normally V1.x=V1)
Hoe vind ik de hardware versie van een TP-Link product? - Do NOT turn off the power during the upgrade process, as it may cause permanent damage to the product.
- To avoid wireless disconnect issue during firmware upgrade process, it's recommended to upload firmware with wired connection unless there is no LAN/Ethernet port on your TP-Link device.
- It's recommended that users stop all Internet applications on the computer, or simply disconnect Internet line from the device before the upgrade.
- Use decompression software such as WinZIP or WinRAR to extract the file you download before the upgrade.
Archer MR500(EU)_V1_231109 |
Download | |
---|---|---|
Publicatiedatum: 2024-04-07 | Taal: Meertalig | Bestandsgrootte: 38.14 MB |
Modifications and Bug Fixes: Note: |
Archer MR500(EU)_V1_1.6.0 Build 231016 |
Download | |
---|---|---|
Publicatiedatum: 2024-03-27 | Taal: Meertalig | Bestandsgrootte: 38.14 MB |
Modifications and Bug Fixes: Note: |
Archer MR500(EU)_V1_230625 |
Download | |
---|---|---|
Publicatiedatum: 2023-12-08 | Taal: Meertalig | Bestandsgrootte: 38.14 MB |
Modifications and Bug Fixes: Notes: |
Gebruik van Firmware van Derde Partijen in TP-Link Producten
Sommige officiële firmware voor TP-Link producten kunnen vervangen worden door firmware van derde partijen, zoals DD-WRT. TP-Link is niet verplicht hier onderhoud of ondersteunig op te bieden en garandeert ook niet prestaties of stabiliteit van firmware van een derde partij. Schade aan het product door gebruik van firmware van een derde partij zal de garantie doen vervallen.
Open Source Code voor Programmeerders (GPL)
Houd er rekening mee dat: De producten van TP-Link deels software codes bevatten van derde partijen, inclusief software codes naar de GNU General Public Licence (“GPL“), Versie 1/Versie 2/Versie 3 of GNU Lager General Public License ("LGPL"). U kunt de betreffende software voorwaarde gebruiken in lijn met de GPL licentievoorwaarden.
U kunt de betreffende GPL licentievoorwaren hier bekijken, printen en downloaden. U vindt de download van de GPL source codes van de betreffende software in een TP-Link product en meer informatie, inclusief een lijst met TP-Link software voorzien van GPL software codes, onder GPL Code Center.
De betreffende programma's zijn uitgegeven ZONDER ENKELE GARANTIE; Zelfs ZONDER de impliciete garantie van VERKOOPBAARHEID of GESCHIKTHEID VOOR EEN BEPAALDE DOEL. Zie de betreffende GNU See the respective GNU Algemene Openbare Licentie voor meer details.
Apps
![](https://static.tp-link.com/res/style/images/tp-link-tether.png)
- TP-Link Tether
TP-Link Tether provides the easiest way to access and manage your network with your iOS or Android devices. Learn more about TP-Link Tether and Compatible Devices
Note: To use Tether, please update your TP-Link device's firmware to the latest version.
GPL Code
Emulatoren
Firmwareversie |
Working Mode |
Taal |
|
---|---|---|---|
220509 |
- |
Engels |
Note:
1. This Emulator is a virtual web GUI where you can program your TP-Link product firmware. For details about an individual product’s features and specifications please use the search facility and go to the product page.
2. Please check the firmware version corresponds to the version shown on the Emulator interface. Each firmware version has its own GUI and functionality.
3. Please note that not all firmware versions are represented on the Emulator.