Descarga para T1600G-52TS | TP-Link España

Archivos MIBs

T1600G-52TS(UN)_v4_MIB_20190321

Descarga

Fecha de Publicación: 2019-09-25

Idioma: Inglés

Tamaño de Archivo: 200.17 KB

Sistema Operativo: Win2000/XP/2003/Vista/7/8/8.1/10/Mac/Linux

T1600G-52TS(UN)_V4_MIB_20180716

Descarga

Fecha de Publicación: 2019-05-13

Idioma: Inglés

Tamaño de Archivo: 206.12 KB

Sistema Operativo: Win2000/XP/2003/Vista/7/8/8.1/10/Mac/Linux

Cliente 802.1 X

TP-LINK_802.1X_Client_Software

Descarga

Fecha de Publicación: 2017-09-05

Idioma: Inglés

Tamaño de Archivo: 5.5MB

Sistema Operativo: Win2000/XP/2003/Vista/7/8/8.1/10

Preguntas Frecuentes

Cómo configurar el relé DHCP en un switch TP-Link 11-06-2024255316
How to configure LACP on our Smart/ Managed Switch 10-29-2024234593
Cómo configurar la VLAN 802.1Q para puertos LAG en switches inteligentes y administrados mediante la nueva GUI 09-16-202489588
¿Cómo configurar OpenSSH 7.0 (y superior) para iniciar sesión en switches inteligentes y administrados? 09-12-2024132893
Cómo configurar la VLAN de voz para optimizar la transmisión del tráfico de voz en los switches inteligentes y administrados de TP-Link utilizando la nueva GUI 09-10-2024110376
¿Qué debo hacer si no puedo acceder a la página de administración web de mi switch TP-Link? 08-30-2024346398
How to Block Unknown Devices to Access the Switch by Using IP Source Guard 08-09-202475546
Why the firmware version does not change after upgrading in T Series switches? 08-09-202462235
How to configure IGMP Snooping for IPTV network using L2 switch 08-09-2024223013
How to configure the default gateway of the smart and managed switches using the old GUI 08-09-2024256690
La diferencia entre la función Voice VLAN y la función Auto VOIP 07-15-202479437
Do you still have any doubt about the effect of QoS on the Switch of TP-Link? 07-23-202488872
How to block an illegal client with Certain IP address from getting access to the network using TP-Link Managed Switches 07-01-202478624
Cómo lograr la autenticación AAA a través del servidor TACACS+ en el conmutador 04-26-202458972
How to Configure Port Isolation Function on Our Layer 2 Manage switches through Web Browser 06-29-2022127356
How to Configure Port Mirror on TP-Link Smart Switches and L2 Managed Switches 06-29-202282034
How to configure 802.1q VLAN on Smart Switches 06-29-2022147536
How to limit the port rate of the incoming traffic via ACL function 06-28-202258840
How to test the Jumbo Frame pass-through feature on TP-Link switches 06-28-2022184252
How to build up a multi-nets network via Multi-Nets NAT feature on TP-Link router with L2+/L3 switches 06-28-2022323472
How to change the IP address of the smart and managed switches using the old GUI and CLI 06-28-2022324982
How to configure MAC ACL on Smart/Managed switch 06-28-202284441
How to set up multi SSID on EAP Product 06-28-20222062
The nodes that TP-Link T1600/T2600 series switch use to display the CPU and Memory utilization through SNMP 12-26-201668398
How to configure Extended IP ACL 04-28-201284851

Firmware

A firmware update can resolve issues that the previous firmware version may have and improve its current performance.

To Upgrade

IMPORTANT: To prevent upgrade failures, please read the following before proceeding with the upgrade process

Please upgrade firmware from the local TP-Link official website of the purchase location for your TP-Link device, otherwise it will be against the warranty. Please click here to change site if necessary.
Please verify the hardware version of your device for the firmware version. Wrong firmware upgrade may damage your device and void the warranty. （Normally V1.x=V1）
Cómo encontrar la versión de hardware en un dispositivo de TP-Link
Do NOT turn off the power during the upgrade process, as it may cause permanent damage to the product.
To avoid wireless disconnect issue during firmware upgrade process, it's recommended to upload firmware with wired connection unless there is no LAN/Ethernet port on your TP-Link device.
It's recommended that users stop all Internet applications on the computer, or simply disconnect Internet line from the device before the upgrade.
Use decompression software such as WinZIP or WinRAR to extract the file you download before the upgrade.

T1600G-52TS(UN)_V4_20200918.

Descarga

Fecha de Publicación: 2021-05-21

Idioma: Inglés

Tamaño de Archivo: 8.67 MB

ew Features/Enhancements:
Add the feature that supports to be managed by the Omada SDN Controller. In the controller mode, some advanced functions will be limited. You can refer to the FAQ2936 to see the functions that can be configured on the controller.

Notes:
1. For T1600G-52TS(UN) V4.0
2. Your device's configuration will not be lost after upgrading, which means you don't need to configure your device again after upgrading.
3. If you choose to manage the switch with controller mode, the settings you configured in standalone mode will lose after the switch is adopted by the controller.

T1600G-52TS(UN)-V4-20200109

Descarga

Fecha de Publicación: 2020-03-27

Idioma: Inglés

Tamaño de Archivo: 9.49 MB

New Features/Enhancements:
1. Add the feature that needs to change the password when login for the first time.
2. Add the feature that can choose not to change the IP address when resetting the switch.
3. Add "service reset-disable" for removing reset option from Bootutil.
4. Add built-in Telnet client which allows the switch can telnet other devices.
5. Allow disabling HTTP and HTTPS for access types at the same time.
6. Optimize the password character set to support more special characters.
7. Optimize the BPDU Filter feature to make ports not send out BPDU packets when BPDU Filter is enabled.
8. Optimized the CLI display of MVR configurations.
9. Support to display MVR members of inactive and active groups.
10. Support to view/clear mac-address table on port/VLAN.
11. Support to fill in file name with folder path when using SNMP or CLI to upgrade firmware or restore config file through TFTP.
Notes:
1. For T1600G-52TS(UN) V4.0
2. Your device's configuration will not be lost after upgrading, which means you don't need to configure your device again after upgrading.

3. After upgrading, it cannot downgrade to the old version firmware because of the encryption rule has changed.

T1600G-52TS(UN)_V4_20190516

Descarga

Fecha de Publicación: 2019-07-04

Idioma: Inglés

Tamaño de Archivo: 9.71 MB

Modifications and Bug Fixes:
1. Update HTTPS to support TLS1.2.
2. Fix the bug that the settings of SNMP Community/Notification/Trap will lose after rebooting the switch when turning off the global switch of SNMP function.
3.Fix the bug that the IP in circuit-ID is wrong when the VLANs which the port belong to does not set up the interface and PPPoE IP insertion is IP mode.
4. Fix the bug that NTP server will be changed when setting up only one NTP server and fail to get the time.
5. Fix the bug that cannot set up auto mode for fibre ports which in the port channel.
6. Fix the bug that access control entries will not take effect when two or more entries are added for port binding.

Notes:
For T1600G-52TS(UN) V4.0.

To Use Third Party Firmware In TP-Link Products

Some official firmware of TP-Link products can be replaced by the third party firmware such as DD-WRT. TP-Link is not obligated to provide any maintenance or support for it, and does not guarantee the performance and stability of third party firmware. Damage to the product as a result of using third party firmware will void the product's warranty.

Open Source Code For Programmers (GPL)

Please note: The products of TP-Link partly contain software code developed by third parties, including software code subject to the GNU General Public Licence (“GPL“), Version 1/Version 2/Version 3 or GNU Lesser General Public License ("LGPL"). You may use the respective software condition to following the GPL licence terms.

You can review, print and download the respective GPL licence terms here. You receive the GPL source codes of the respective software used in TP-Link products for direct download and further information, including a list of TP-Link software that contain GPL software code under GPL Code Center.

The respective programs are distributed WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the respective GNU General Public License for more details.

Código GPL

T1600G-52TS(UN)_V4_GPL

Simuladores

Versión de firmware	Modo en Uso	Idioma
180716	-	Inglés	Navegar
180716	-	Inglés	Navegar

Nota:

1. Este simulador es una GUI web virtual donde se puede consultar el firmware del producto TP-Link. Para obtener más información sobre las características y especificaciones de un producto individual, utilice la herramienta de búsqueda y vaya a la página del producto.

2. Compruebe que la versión del firmware corresponde a la versión mostrada en la interfaz del Emulador. Cada versión de firmware tiene su propia GUI y funcionalidad.

3. Tenga en cuenta que no todas las versiones de firmware están representadas en el Simulador.

Descarga para T1600G-52TS V4

Archivos MIBs

Cliente 802.1 X

Preguntas Frecuentes

Firmware

To Upgrade

To Use Third Party Firmware In TP-Link Products

Open Source Code For Programmers (GPL)

Código GPL

Simuladores

Q&A - Preguntas y Respuestas

Guía de configuración y características