Stáhnout pro TL-SG3210
- Product Overview
- Dokument
Controller Software
The EAP Controller is used to manage multiple EAPs intensively.
Omada_SDN_Controller_v5.14.26.1_linux_x64.deb |
Stáhnout | |
---|---|---|
Datum vydání: 2024-07-10 | Jazyk: Multi-language | Velikost souboru: 217.79 MB |
Operační systém: Ubuntu 16.04/18.04/20.04/22.04, Debian 8/9/10 |
||
Omada_SDN_Controller_v5.14.26.1_linux_x64.tar.gz |
Stáhnout | |
---|---|---|
Datum vydání: 2024-07-10 | Jazyk: Multi-language | Velikost souboru: 230.75 MB |
Operační systém: Ubuntu 16.04/18.04/20.04/22.04, Debian 8/9/10 |
||
Omada_SDN_Controller_v5.14.26.1_Windows |
Stáhnout | |
---|---|---|
Datum vydání: 2024-07-10 | Jazyk: Multi-language | Velikost souboru: 317.68 MB |
Operační systém: Windows 7/8/10/11/Server |
||
Omada_SDN_Controller_v5.14.20.9_Windows |
Stáhnout | |
---|---|---|
Datum vydání: 2024-05-27 | Jazyk: Multi-language | Velikost souboru: 317.48 MB |
Operační systém: Windows 7/8/10/11/Server |
||
Omada_SDN_Controller_v5.13.30.8_linux_x64.deb |
Stáhnout | |
---|---|---|
Datum vydání: 2024-02-27 | Jazyk: Multi-language | Velikost souboru: 189.79 MB |
Operační systém: Ubuntu 16.04/18.04/20.04/22.04, Debian 8/9/10 |
||
As this version optimizes the WAN/LAN port configuration of Omada Gateway, it will cause some WAN ports to be enabled by default and cannot be disabled. This may result in changes to the load balance configuration, you can make the changes manually. |
Omada_SDN_Controller_v5.13.30.8_linux_x64.tar.gz |
Stáhnout | |
---|---|---|
Datum vydání: 2024-02-27 | Jazyk: Multi-language | Velikost souboru: 202.04 MB |
Operační systém: Ubuntu 16.04/18.04/20.04/22.04, Debian 8/9/10 |
||
As this version optimizes the WAN/LAN port configuration of Omada Gateway, it will cause some WAN ports to be enabled by default and cannot be disabled. This may result in changes to the load balance configuration, you can make the changes manually. |
Omada_SDN_Controller_v5.13.30.8_Windows |
Stáhnout | |
---|---|---|
Datum vydání: 2024-02-05 | Jazyk: Multi-language | Velikost souboru: 283.05 MB |
Operační systém: Windows 7/8/10/11/Server |
||
As this version optimizes the WAN/LAN port configuration of Omada Gateway, it will cause some WAN ports to be enabled by default and cannot be disabled. This may result in changes to the load balance configuration, you can make the changes manually. |
Omada_SDN_Controller_v5.8.4_Windows |
Stáhnout | |
---|---|---|
Datum vydání: 2023-01-06 | Jazyk: Multi-language | Velikost souboru: 236.31 MB |
Operační systém: Windows 7/8/10/11/Server |
||
Omada Discovery Utility
Omada Discovery Utility 5.2.1 |
Stáhnout | |
---|---|---|
Datum vydání: 2024-08-05 | Jazyk: Angličtina | Velikost souboru: 40.51 MB |
Operační systém: Windows/Mac OS/Linux |
||
Enhancements & Fixed Bugs: Optimized some functions and fixed bugs.
Note: 1. To run this software, you need to install JRE 8.0 on your PC first. 2. Double-click the software or run the command "java -jar **.jar" to run the software on MacOS (**.jar is the name of this software). 3. Omada Controller and Discover Utility cannot run on the same computer at the same time. |
Omada Discovery Utility 5.2.0 |
Stáhnout | |
---|---|---|
Datum vydání: 2024-05-06 | Jazyk: Angličtina | Velikost souboru: 40.04 MB |
Operační systém: Windows/Mac OS/Linux |
||
New Feature/Enhancement: 1. Adapt to Omada SDN Controller v5.14.20. 2. Added support for Easy Managed Switch and OLT device identification and inform url. |
MIBs Files
TP-Link_L2 Switch_MIB |
Stáhnout | |
---|---|---|
Datum vydání: 2024-02-29 | Jazyk: Angličtina | Velikost souboru: 199.18 KB |
Operační systém: Windows/Mac OS/Linux |
||
|
Driver
TP-LINK_USB_Console_Driver |
Stáhnout | |
---|---|---|
Datum vydání: 2019-03-13 | Jazyk: Angličtina | Velikost souboru: 3.10 MB |
Operační systém: Win2000/XP/2003/Vista/7/8/8.1/10 |
||
Notes: For TP-LINK switches with USB Console port |
Setup Video
-
How to Adopt Omada Devices via Omada Controller
This video will show you how to adopt Omada devices and configure a gateway network via the Omada SDN Controller (Omada Software Controller is used as an example).
More Fold -
How to add devices with Zero-Touch Provisioning (ZTP) via Could-Based Controller
This video will show you How to add devices with Zero-Touch Provisioning (ZTP) via Could-Based Controller.
More Fold -
How to Monitor and Manage Devices via Omada SDN Controller
This video will show you how to monitor and manage devices via Omada SDN Controller.
More Fold -
How to Configure Schedules to Automate Network Control via Omada SDN Controller
This video shows how to configure WLAN Schedule, Port Schedule (PoE Schedule, Port Schedule), Upgrade Schedule, and Reboot Schedule to help you easily manage your network using the Omada Software Controller for demonstration.
More Fold -
How to Monitor and Manage Clients via Omada SDN Controller
This video will show you how to monitor and manage clients via Omada SDN Controller.
More Fold -
How to Check the Clients Signal Strength and Estimate the Actual Speed
This video will show you how to check the client signal strength and estimate actual network speeds.
More Fold -
How to Create User Accounts on Omada SDN Controller
This video shows how to create custom roles, local user accounts and cloud user accounts of different levels on the Omada SDN Controller.
More Fold
FAQ
- Configuration guide of DHCP Options on Omada Switch
- Troubleshooting of Layer 2 Multicast Failure
- How to configure IGMP Snooping on Omada switches for hotel IPTV scenario
- How to configure IGMP Snooping for IPTV network using L2 switch
- How to configure 802.1X VLAN Assignment on Omada Controller
- Recommended ACL configuration on Omada Switch for common scenarios
- What is the Console Cable and the line sequence of it?
- How to configure AAA to assign different privileges for radius users to login on Omada Switch
- Suggested configurations for AVoIP protocols on Omada Switches
- Do you still have any doubt about the effect of QoS on the Switch of TP-Link?
- Getting started without an Omada Controller
- How to configure Management VLANs for Omada Switches and APs (for SOHO scenario)
- How to configure Management VLANs for Omada Switches and APs (for Business scenario)
- How to configure Voice VLAN on Omada Switches using Omada Controller
- How to configure 802.1Q VLAN on Omada Switches when used with a third-party router
- What should I do if my switch has no Internet access?
- What should I do if my Internet from switch is unstable?
- How to setup Switch as DHCP server on Omada Controller
- How to configure DHCP Auto Install to let switch get configuration file and image from TFTP server
- How to build an 802.1X access authentication system using Switches on Omada Controller
- How to block an illegal client with Certain IP address from getting access to the network using TP-Link Managed Switches
- What are the differences in features and application scenarios among various serial switches?
- How to configure Optical Line Terminal (OLT) and Omada Switch with XM60A
- How to configure LAG (LACP) on Omada Switches via Omada Controller
- How to configure VLAN Interfaces and Static Routes on Omada Switches
- Troubleshooting for Voice VLAN and Auto VoIP
- Troubleshooting for 802.1X (Dot1X) Authentication Fails on Omada Switch
- Troubleshooting for RADIUS Authentication Failure
- What to do if devices in the same VLAN fail to communicate with each other when connected to TP-Link switch
- Omada Switch DHCP Relay Configuration Guide
- What to do if Omada Device Adoption Failure
- How to Configure LAG (LACP) on Omada Switches in Controller Mode
- Best practice to prevent network loops with Omada SDN solution
- How to enter the BootUtil Menu to factory reset the switch with the console cable
- How to configure switch as DHCP server on Standalone mode
- How to Configure Management VLAN on TP-Link Smart and Managed Switches Using the New GUI
- Typical CLI Configuration Examples for TP-Link JetStream Switch
- Jak lze přistupovat k řízenému přepínači L2 prostřednictvím konzolového portu?
- Jak nakonfigurovat síť VLAN pomocí značky normy 802.1Q na řízených přepínačích?
- How to reset JetSteam (TM) series switches to factory default by using Hyper Terminal
- How to configure port security function
- How to Configure Port Isolation Function on Our Layer 2 Manage switches through Web Browser
- How to Configure Port Mirror on TP-Link Smart Switches and L2 Managed Switches
- How to test the Jumbo Frame pass-through feature on TP-Link switches
- How to configure RSTP on TP-Link switches using the old GUI
- How to change the IP address of the smart and managed switches using the old GUI and CLI
- How to configure LACP on our Smart/ Managed Switch
- How to configure MAC ACL on Smart/Managed switch
- How to configure 802.1Q VLAN on Smart and Managed switches using the new GUI
- How to configure IGMP Snooping for IPTV network on L2 Managed switches using the new GUI
- How to manage the switch with Mac via Micro USB cable
- How to check and modify VLANs on a TP-Link JetStream switch via SNMP
- How to achieve AAA Authentication through TACACS + server on the switch
- How to configure Extended IP ACL
Firmware
A firmware update can resolve issues that the previous firmware version may have and improve its current performance.
To Upgrade
IMPORTANT: To prevent upgrade failures, please read the following before proceeding with the upgrade process
- Please upgrade firmware from the local TP-Link official website of the purchase location for your TP-Link device, otherwise it will be against the warranty. Please click here to change site if necessary.
- Please verify the hardware version of your device for the firmware version. Wrong firmware upgrade may damage your device and void the warranty. (Normally V1.x=V1)
Jak zjisti hardwarovou verzi vašeho TP-Link zařízení? - Do NOT turn off the power during the upgrade process, as it may cause permanent damage to the product.
- To avoid wireless disconnect issue during firmware upgrade process, it's recommended to upload firmware with wired connection unless there is no LAN/Ethernet port on your TP-Link device.
- It's recommended that users stop all Internet applications on the computer, or simply disconnect Internet line from the device before the upgrade.
- Use decompression software such as WinZIP or WinRAR to extract the file you download before the upgrade.
(TL-)SG3210(UN)_V3.6_3.20.0 Build 20230818 |
Stáhnout | |
---|---|---|
Datum vydání: 2024-01-08 | Jazyk: Angličtina | Velikost souboru: 11.17 MB |
This firmware is fully adapted to Omada SDN Controller v5.9 and above. The TL-SG3210(UN)3.0/3.6 can be upgraded using this firmware, and the upgrade will result in the following changes: |
TL-SG3210(UN)_V3.6_3.0.8 Build 20230602 |
Stáhnout | |
---|---|---|
Datum vydání: 2023-06-29 | Jazyk: Angličtina | Velikost souboru: 10.04 MB |
TL-SG3210(UN)_V3.6_3.0.7 Build 20221130 |
Stáhnout | |
---|---|---|
Datum vydání: 2023-01-06 | Jazyk: Angličtina | Velikost souboru: 9.85 MB |
New Features & Enhancements: Bug Fixed: Notes: |
To Use Third Party Firmware In TP-Link Products
Some official firmware of TP-Link products can be replaced by the third party firmware such as DD-WRT. TP-Link is not obligated to provide any maintenance or support for it, and does not guarantee the performance and stability of third party firmware. Damage to the product as a result of using third party firmware will void the product's warranty.
Open Source Code For Programmers (GPL)
Please note: The products of TP-Link partly contain software code developed by third parties, including software code subject to the GNU General Public Licence (“GPL“), Version 1/Version 2/Version 3 or GNU Lesser General Public License ("LGPL"). You may use the respective software condition to following the GPL licence terms.
You can review, print and download the respective GPL licence terms here. You receive the GPL source codes of the respective software used in TP-Link products for direct download and further information, including a list of TP-Link software that contain GPL software code under GPL Code Center.
The respective programs are distributed WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the respective GNU General Public License for more details.
Apps
- Omada APP
TP-Link Omada lets you configure settings, monitor network status and manage clients, all from the convenience of a smart phone or tablet. Learn more about Compatible Devices.
Note: SDN switch/router is compatible with Omada App only in controller mode. To use Omada, please update your device's firmware to the latest version.