How to log into the web management page of the TL-MR3040?
The web-based management page is a built-in internal web server that does not require internet access. It does however require you device to be connected to the TP-Link router. This connection can be wired or wireless. It is strongly recommended to use a wired connection if you are going to change the router’s wireless settings or upgrade the firmware version of the router.
There are multiple working modes on the TL-MR3040.It requires different settings to access the web management page under different working mode.
![](http://static.tp-link.com/resources/UploadFiles/Images/How_to_login_to_the_web_management_page_of_the_TL-MR3040image002.jpg)
In this article, we will explain how to access the web interface in different working modes.
3G/4G Mode & WISP Mode
3G/4G mode includes 3G/4G Only,3G/4G Preferred, WAN Only,WAN Preferred
Step 1:
Connect the TL-MR3040 directly to your computer’s Ethernet port by an Ethernet cable.
Step 2:
Power on the TL-MR3040 and switch it to 3G/4G or WISP mode.
![](http://static.tp-link.com/resources/UploadFiles/Images/How_to_login_to_the_web_management_page_of_the_TL-MR3040image004.jpg)
Step 3:
Open a web browser such as Safari, Google Chrome or Internet Explorer. At the top of the window in the address bar type 192.168.0.1 -> Press Enter
![](http://static.tp-link.com/resources/UploadFiles/Images/How_to_login_to_the_web_management_page_of_the_TL-MR3040image006.jpg)
Enter the default User Name: admin
Enter the default Password: admin
Click OK
![](http://static.tp-link.com/resources/UploadFiles/Images/How_to_login_to_the_web_management_page_of_the_TL-MR3040image008.jpg)
AP Mode
AP Mode includes Access Point,Repeater,Client,Bridge with AP.
Step 1:
Connect the TL-MR3040 directly to your computer’s Ethernet port by an Ethernet cable.
Step 2:
Power on the TL-MR3040 and switch it to AP mode.
![](http://static.tp-link.com/resources/UploadFiles/Images/004How_to_login_to_the_web_management_page_of_the_TL-MR3040image004.jpg)
Step 3:Set up a static IP on the computer
Initial Computer Setup– For Windows OS
1) Press Windows key
and R key on the keyboard at the same time to open the Run application, type in ncpa.cpl ->Press OK
![](http://static.tp-link.com/resources/UploadFiles/Images/How_to_login_to_the_web_management_page_of_the_TL-MR3040image009.jpg)
![](http://static.tp-link.com/resources/UploadFiles/Images/How_to_login_to_the_web_management_page_of_the_TL-MR3040image011.jpg)
2) Right Click Local Area Connection or Ethernet on Windows 8 & 8.1>Select Properties > Double Click Internet Protocol Version 4 (TCP/IPv4) or Internet Protocol (TCP/IP) on Windows XP.
![](http://static.tp-link.com/resources/UploadFiles/Images/How_to_login_to_the_web_management_page_of_the_TL-MR3040image013.jpg)
![](http://static.tp-link.com/resources/UploadFiles/Images/How_to_login_to_the_web_management_page_of_the_TL-MR3040image015.jpg)
3) Select “Use the Following IP address:”
Type the following information: IP address: 192.168.0.10 ; Subnet mask: 255.255.255.0->Click OK to exit->Click OK again to apply the settings.
|
![]() |
Initial Computer Setup– For Mac OS X
Go to the Apple>System Preferences>Network> Highlight Ethernet >Configure IPv4: Using DHCP with manual address
Input the IPv4 Address: 192.168.0.10
Click Apply
![](http://static.tp-link.com/resources/UploadFiles/Images/How_to_login_to_the_web_management_page_of_the_TL-MR3040image019.jpg)
Step 4:
Open a Web Browser -> Type 192.168.0.1 in the address bar -> Press Enter
![](http://static.tp-link.com/resources/UploadFiles/Images/006How_to_login_to_the_web_management_page_of_the_TL-MR3040image006.jpg)
Enter the default User Name: admin
Enter the default Password: admin
Click OK
![](http://static.tp-link.com/resources/UploadFiles/Images/008How_to_login_to_the_web_management_page_of_the_TL-MR3040image008.jpg)
After the configuration of AP Mode, please remember to change the IP settings back as it was before.
Computer Setup Reversion
For Windows OS
Find Local Area Connection/Ethernet again>Select Properties > Double Click Internet Protocol Version 4 (TCP/IPv4) or Internet Protocol (TCP/IP) on Windows XP>Select “Obtainan IP address automatically” and “Obtain DNS server address automatically”
Click OK to exit
Click OK again to apply the settings.
![](http://static.tp-link.com/resources/UploadFiles/Images/How_to_login_to_the_web_management_page_of_the_TL-MR3040image021.jpg)
For Mac OS X
Go to the Apple->System Preferences->Network-> Highlight Ethernet ->Configure IPv4: Using DHCP.
Click Apply.
![](http://static.tp-link.com/resources/UploadFiles/Images/How_to_login_to_the_web_management_page_of_the_TL-MR3040image023.jpg)
This Article Suits for:
Полезен ли беше този ЧЗВ?
Вашите отзиви помагат за подобряване на този сайт.
Вашите отзиви помагат за подобряване на този сайт.
User Application Requirement | Updated 05-16-2016 06:20:25 AM