What can I do if I forget the login password of TP-Link Wireless Router?

The default login username and password are both “admin”. If you have changed the login password, there is no way to find it. You need reset it to factory default and configure it as a new one.
 
Directly press and hold the reset button on the rear panel with a pin for approximately 10 seconds when the device is running. 
Release the reset button and wait for the device to reboot.
 
Note:
1. Make certain that the router is powered on before it restarts completely. 2. The default IP address is 192.168.0.1(or http://tplinklogin.net ), and the default login username and password both are admin (all lower case).

3.  Ensure that the IP address of your computer is in the same subnet with the device.  It means that your computer has an IP address 192.168.0.X (X is in range of 2~253), and the subnet mask is 255.255.255.0.

This Article Suits for:
User Application Requirement | Updated 08-08-2012 14:22:05 PM

From United States?

Get products, events and services for your region.