下載 TL-SG2008
- Product Overview
3.0_overview_normal_1599720750009t.png)
8埠 Gigabit 智慧型交換器MIB檔案
|
TL-SG2008_V1_MIB_150203 |
下載 | |
|---|---|---|
| 發佈日期: 2015-02-03 | 語言: 英語 | 檔案大小: 78 KB |
作業系統: WinXP/2003/Vista/7/8/Mac/Linux |
||
|
Notes: For TL-SG2008 V1 150203 and subsequent versions |
||
|
TL-SG2008_V1_MIB_140126 |
下載 | |
|---|---|---|
| 發佈日期: 2014-01-28 | 語言: 英語 | 檔案大小: 66 KB |
作業系統: Win2000/XP/2003/Vista/7/8/Mac/Linux |
||
|
Notes: For TL-SG2008 V1 140126 and subsequent versions |
||
常見問題
- 如何在 TP-Link Omada 交換器於控制器模式設定 LAG/LACP
- 如何將獨立模式下的交換器設定為 DHCP 伺服器？
- 如何在 TP-Link 智慧型和管理型交換器上設定 management VLAN
- 如何在交換器上透過 TACACS+ Server 取得 AAA 驗證
- 如何在 TP-Link JetStream 交換器上透過 SNMP 確認並修改 VLAN
- TP-Link JetStream 交換器典型 CLI 設定範例
- How to Setup TP-Link AP’s Multi-SSID (VLAN) to Work with TP-Link Switch
- 如何在 TP-Link 交換器上測試巨型訊框穿透功能?
- How to configure RSTP on TP-Link switches using the old GUI
- How to change the IP address of the smart and managed switches using the old GUI and CLI
- How to configure LACP on our Smart/ Managed Switch
- How to configure MAC ACL on Smart/Managed switch
- 如何在智慧型和管理型交換器上使用新GUI設定802.1Q VLAN?
- 如何在新GUI的L2管理型交換器為IPTV網路設定IGMP Snooping？
- 如何在 Omada SDN 控制器中將交換器設為 DHCP 伺服器
- What should I do if I cannot access the web management page of my TP-Link switch?
- 各種交換器的功能和應用有什麼差別呢？
- How to configure OpenSSH 7.0(and above) to login smart and managed switches?
- How to Block an illegal client with Certain IP address from getting access to the network using TP-Link Managed Switches
|
TL-SG2008_V1_150624 |
下載 | |
|---|---|---|
| 發佈日期: 2015-06-24 | 語言: 英語 | 檔案大小: 3.37 MB |
|
Modifications and Bug Fixes: New Features/Enhancement: Notes: 1. For TL-SG2008 V1. |
||
|
TL-SG2008_V1_150203 |
下載 | |
|---|---|---|
| 發佈日期: 2015-02-03 | 語言: 英語 | 檔案大小: 3.33 MB |
|
Modifications and Bug Fixes: New Features/Enhancement： 1.Added Network Security feature, including IP-MAC Binding and 802.1X, etc. 2.Added the command "access-list" in the interface range configuration mode (config-if-range). 3. Enriched sub-nodes of dot1dTp and dot1qTp so that dot1dTpFdbTable and dot1qTpFdbTable are supported now. 4. Improved CLI commands and configuration file so that the password saved in the configuration file can be encrypted now. 5. Improved Traffic Monitor feature so that values bigger than 2^32 are supported now. 6. Optimized the naming principles for device description, VLAN name and port description so that space/blank is allowed now. 7. Optimized Loopback Detection feature. Bug Fixed： 1.Solved LACP compatibility problems with Free NAS and Marvell Network Control Utility for Aggregation and VLANs. 2.Fixed the bug that after working for about 10 days, a problem with high CPU occupied and inaccessible web interface comes out within a short period. 3.Fixed the bug on MAC ACL that if ending with "deny all", a rule in higher priority may fail. 4. Fixed the bug that some sub-nodes under interface node (OID: 1.3.6.1.2.1.2) never return a non-zero value. 5. Fixed the bug on DHCP Filtering/Snooping that replies from the DHCP server will be blocked if there isn't a DHCP discovery before the DHCP request. 6.Since DHCP Snooping feature is added (under IP-MAC Binding) in this firmware, DHCP Filtering feature is removed. Notes: 1. For TL-SG2008 V1
2. Since we have added DHCP Snooping feature and deleted DHCP Filtering feature in this firmware, your configs about DHCP Filtering will be lost after upgrading, you may need to configure DHCP Snooping manually. Other configs will be reserved after upgrading.
3.After upgrading to this firmware, it is not allowed to downgrade to an ealier one.
|
||
|
TL-SG2008_V1_140626 |
下載 | |
|---|---|---|
| 發佈日期: 2014-06-26 | 語言: 英語 | 檔案大小: 3.31 MB |
|
Modifications and Bug Fixes:
Notes: For TL-SG2008 V1 |
||