下載 T3700G-28TQ
- Product Overview
MIB檔案
T3700G-28TQ(UN)_V1_MIB_160112 |
下載 | |
---|---|---|
發佈日期: 2016-01-12 | 語言: 英語 | 檔案大小: 127 KB |
作業系統: Win2000/XP/2003/Vista/7/8/8.1/10/Mac/Linux |
||
Notes: For T3700G-28TQ_V1_160112. |
T3700G-28TQ_V1_MIB_150313 |
下載 | |
---|---|---|
發佈日期: 2015-03-13 | 語言: 英語 | 檔案大小: 122 KB |
作業系統: Win2000/XP/2003/Vista/7/8/8.1/10/Mac/Linux |
||
Notes: For T3700G-28TQ V1 150313 and subsequent versions. |
802.1X使用者端
TP-LINK_802.1X_Client_Software |
下載 | |
---|---|---|
發佈日期: 2017-09-05 | 語言: 英語 | 檔案大小: 5.5MB |
作業系統: Win2000/XP/2003/Vista/7/8/8.1/10 |
||
|
常見問題
- 如何使用 TP-Link 路由器搭配 L2+ / L3 交換器的 Multi-Nets NAT 功能建立多網段網路架構
- 如何透過 Micro USB 線管理交換器
- 如何在 TP-Link 智慧型和管理型交換器上設定 management VLAN
- 如何在交換器上透過 TACACS+ Server 取得 AAA 驗證
- 如何透過主控連接埠存取 L2 網管型交換器?
- 如何在 L2 網管型交換器上設定 802.1Q 標籤 VLAN
- How to Configure Port Isolation Function on Our Layer 2 Manage switches through Web Browser
- How to limit the port rate of the incoming traffic via ACL function
- 如何在 TP-Link 交換器上測試巨型訊框穿透功能?
- How to build up an 802.1X access authentication system using TP-Link switch
- How to configure VLAN VPN on L2 Managed switches using the old GUI
- How to configure RSTP on TP-Link switches using the old GUI
- How to change the IP address of the smart and managed switches using the old GUI and CLI
- How to configure LACP on our Smart/ Managed Switch
- How to configure MAC ACL on Smart/Managed switch
- 如何使用 L2 交換器設定 IGMP 偵聽提供 IPTV 網路?
- How to configure the default gateway of the smart and managed switches using the old GUI
- How to build a Campus Network using TP-LINK products
- How to build a Factory Network using TP-Link products
- How to build a Wireless Network for Dormitory using tp-link products
- How to build a Wireless Network for Shopping Mall using tp-link products
- How to set up an Enterprise VPN using tp-link products
- How to configure the DHCP Relay in TP-Link Switch
- 如何在 TP-Link 智慧型和管理型交換器上設定 Voice VLAN 優化語音封包傳輸?
- 如何透過 console 線進入 BootUtil 選單重置交換器?
- Why the Firmware Version Does Not Change after Upgrading in T Series Switches?
- What should I do if I cannot access the web management page of my TP-Link switch?
- Voice VLAN 和 Auto VOIP 功能差異
- How to configure OpenSSH 7.0(and above) to login smart and managed switches?
- Do you still have any doubt about the effect of QoS on the Switch of TP-Link?
- What is the Console Cable and the line sequence of it?
- How to Upgrade Firmware of a Switch via the Bootutil Menu
- How to Block Unknown Devices to Access the Switch by Using IP Source Guard
- How to Block an illegal client with Certain IP address from getting access to the network using TP-Link Managed Switches
- How to configure Extended IP ACL
T3700G-28TQ(UN)_V1_160112 |
下載 | |
---|---|---|
發佈日期: 2016-01-12 | 語言: 英語 | 檔案大小: 5.36 MB |
Modifications and Bug Fixes: New Features/Enhancement 1.fixed the stacking failure problem by NTP settings. 2.Improved StabilityNotes: For T3700G-28TQ V1. |
T3700G-28TQ_V1_MIB_150313 |
下載 | |
---|---|---|
發佈日期: 2015-03-13 | 語言: 英語 | 檔案大小: 122 KB |
Notes: For T3700G-28TQ V1 150313 and subsequent versions. |
T3700G-28TQ_V1_20150313 |
下載 | |
---|---|---|
發佈日期: 2015-03-13 | 語言: 英語 | 檔案大小: 5.36 MB |
Modifications and Bug Fixes: Enhancement: 1.Improved the stability of stacking feature. Bug fixed: 1.Fixed the bug that when more than 2 ports are enabled LACP and the peer switch has one port with LACP disabled,the port status is suggested to be set as 0x5. 2.Fixed the bug that the hardware routing table of the stacking system crashes after about twenty minutes if there is a large number of ARP entries transferring frequently. 3.Fixed the bug that aggregated ports act abnormal after changing unit ID. 4.Fixed the bug that when stacked T3700 acts as an DHCP server,its routing table can not transfer correctly when a large number of clients renew/release dynamic IP address frequently. 5.Fixed the bug that process hangs out when two PCs managing T3700 and checking the routing table using telnet simultaneously. Notes: 1. For T3700G-28TQ_V1 2. Old firmware’s configuration file can be imported into this new firmware. 3. Your device’s configuration won't be lost after upgrading, which means you needn't to configure your device again after upgrading. |