Загрузки для TL-SG2210P
>Как узнать версию устройства TP-Link?
- Product Overview
- Manual
Setup Video
-
How to Set Up the Whole Network of Gateway, Switches, and EAPs Using Omada SDN Controller
This video will demonstration how to do a full configuration with TP-Link Omada products including gateway, switches and EAPs. As an example, we are going to build the wired and wireless networks from scratch at our TP-Link Office. The setup consists of 7 steps: Step 1. Log in to the Controller Step 2. Adopt Devices Step 3. View Dashboard and Menus Step 4. Set up WAN Step 5. Set up LAN and VLANs Step 6. Set up Wi-Fi Step 7. Set up ACL
Больше Меньше
FAQ
- How to Configure LAG/LACP on TP-Link Omada switches in Controller Mode
- How to configure switch as DHCP server on Standalone mode
- Using Omada controller to configure multiple SSIDs with different VLANs on TP-Link Omada EAPs and Switches to work with a non-Omada gateway(Multi-Net NAT supported)
- How to Configure Management VLAN on TP-Link Smart and Managed Switches Using the New GUI
- How to Manage Omada Devices at Different Sites Using Omada SDN Controller via Port Forwarding (Controller 5.0 or Above)
- How to Manage Omada Devices at Different Sites Using Omada SDN Controller via VPN (Controller 5.0 or Above)
- В чём разница между главным администратором, администратором и посетителем в системе Omada?
- Как использовать команду Ping в приложении Omada
- Что такое двухэтапная аутентификация и как её включить в системе Omada
- Typical CLI Configuration Examples for TP-Link JetStream Switch
- How to test the Jumbo Frame pass-through feature on TP-Link switches
- How to build up an 802.1X access authentication system using TP-Link switch
- How to configure RSTP on TP-Link switches using the old GUI
- How to change the IP address of the smart and managed switches using the old GUI and CLI
- How to configure LACP on our Smart/ Managed Switch
- How to configure MAC ACL on Smart/Managed switch
- Why my PoE powered device cannot work properly when connected to the PoE Switch?
- How to choose PoE switch
- Как настроить 802.1Q VLAN на Smart и управляемых коммутаторах с новым интерфейсом?
- Как настроить IGMP Snooping для работы IPTV на управляемых коммутаторах 2‑го уровня с новым интерфейсом?
- How to check and modify VLANs on a TP-Link JetStream switch via SNMP
- How to achieve AAA Authentication through TACACS + server on the switch
- How to setup Switch as DHCP server on Omada SDN Controller
- Что делать, если не удаётся получить доступ к веб‑интерфейсу коммутатора TP‑Link?
- How to configure OpenSSH 7.0(and above) to login smart and managed switches?
- Do you still have any doubt about the effect of QoS on the Switch of TP-Link?
- В чём заключаются различия в функциях и способах применения различных серий коммутаторов?
- How to Block an illegal client with Certain IP address from getting access to the network using TP-Link Managed Switches
TL-SG2210P(UN)_V3_20200730 |
Загрузить | |
---|---|---|
Дата публикации: 2022-01-20 | Язык: Английский | Размер файла: 8.46 MB |
Notes: |
TL-SG2210P(UN)_V3.2_3.20.2_20210806 |
Загрузить | |
---|---|---|
Дата публикации: 2021-08-26 | Язык: Английский | Размер файла: 8.81 MB |
This firmware is fully adapted to the Omada SDN platform but only compatible with Omada controller v4.3.5 or above. If you are using an old Omada controller and plan to upgrade firmware for EAP, then you must upgrade the Omada controller as well. Please follow the Upgrade Guide to upgrade the Omada Controller.
Enhancement/Bug Fixed: 1. Fully adapt to Omada SDN Controller 4.3.5. 2. Improved the stability of the Layer-3 interface. 3. Fixed the bug of invalid traffic statistics. 4. Fixed the bug when forwarding bi-directional traffic with specific applications.
Notes: 1. For TL-SG2210P(UN) 3.0,3.20 and 3.26. 2. This firmware is applied to Omada APP of version 3.0.x or above. 3. Please upgrade the switch to the middle firmware Build 20210407 first before upgrading to this firmware or later one. |
TL-SG2210P(UN)_V3_20210407 |
Загрузить | |
---|---|---|
Дата публикации: 2021-05-26 | Язык: Английский | Размер файла: 8.61 MB |
New Feature/Enhancement: |
Приложение
- Omada APP
-
Приложение Omada компании TP‑Link позволяет выполнять настройку параметров, мониторинг сети и управление клиентскими устройствами прямо с телефона или планшета (список совместимых устройств).
Примечание: коммутаторы и маршрутизаторы SDN могут работать с приложением Omada только в режиме контроллера. Для работы приложения Omada необходимо обновить прошивку устройства до последней версии.