How to Configure Band Steering Function on TP-Link CAP/AC Serial Products

Configuration Guide
Updated 06-28-2022 02:38:54 AM 86411
This Article Applies to: 

As we know, some wireless clients can only work on 2.4GHz band while dual-band wireless clients can work on both 2.4GHz and 5GHz bands. So if both single-band and dual-band clients are connected to 2.4GHz wireless network, 2.4GHz wireless network will be overloaded while 5GHz wireless network is relatively free. Band Steering function can avoid this kind of waste, which will lead dual-band clients to connect to 5GHz wireless network with higher priority.

This document will introduce how to configure Band Steering function on TP-Link CAP/AC serial products with one configuration instance based on the topology above to achieve band steering between 2.4GHz and 5GHz bands of CAP1750.

Based on the topology above: we can see that

  1. A newly-added client which supports both 2.4GHz & 5GHz is trying to connect to wireless network “TP-LINK”.
  2. CAP1750 has enabled 2.4GHz and 5GHz wireless networks, and both 2.4GHz and 5GHz wireless networks share the same wireless settings including SSID & Encryption settings. (Note: Band Steering needs 2.4GHz & 5GHz wireless networks share the same wireless settings, otherwise Band Steering function will not work.)
  3. Because most clients (single-band or dual-band) are likely to connect to 2.4GHz wireless network, 2.4GHz wireless network is normally more crowded than 5GHz wireless network like the topology shown above. At this time, we can enable Band Steering function to guide newly-added client to connect to 5GHz wireless network with higher priority.

Here are the configuration methods of Band Steering function on TP-Link AC serial product:

Explanations:

  1. 5GHz Maximum Connection Threshold means the “maximum number of clients that can be connected to CAP’s 5GHz wireless network in priority”. In this instance, we set it as “40”, which means Band Steering function will guide the first 40 dual-band clients to connect to CAP’s 5GHz wireless network in priority. If it reaches the limitation, it means CAP already has many clients connected to its 5GHz wireless network. At this time, there may be no need to guide newly-added client to connect to CAP’s 5GHz wireless network any more.
  2. Difference Threshold means the “minimum client number difference between 2.4GHz and 5GHz wireless networks”. In this instance, we set it as “4”, which means if the client number difference between 2.4GHz and 5GHz wireless networks is larger than 4, 2.4GHz wireless network may be idler than 5GHz wireless network. At this time, there may be no need to guide newly-added client to connect to CAP’s 5GHz wireless network any more.

In a word, Band Steering function will always guide newly-added clients to connect to CAP’s 5GHz wireless network in priority. But if 5GHz Maximum Connection Threshold and Difference Threshold are both satisfied, it means there are already many clients connected to CAP’s 5GHz wireless and 2.4GHz wireless network is idler than 5GHz wireless network. At this time, Band Steering will no more guide newly-added client to connect to CAP’s 5GHz wireless network.

Exceptions:

  1. If newly-added client has failed to get connected with CAP’s 2.4GHz wireless network for 10 times (Maximum Fail Number), CAP’s 5GHz wireless network will accept this client’s connection request even if both 5GHz Maximum Connection Threshold and Difference Threshold are satisfied.

Is this faq useful?

Your feedback helps improve this site.

From United States?

Get products, events and services for your region.