Загрузки для EAP115
>Как узнать версию устройства TP-Link?
Доступность модели и аппаратной версии может изменяться в зависимости от региона. Не забудьте подтвердить указанные данные при рассмотрении вопроса о покупке.
Setup Video
-
How to Install and Set Up Omada Software Controller
This video will show you how to install and set up the Omada Software Controller, using the Windows version for demonstration.
Больше Меньше -
How to Set up a TP-Link EAP via Web browser
This video will demonstrate how to set up a TP-Link EAP via a web browser. The setup consists of three steps:
1. Connect the EAP to the network
2. Log into the EAP (via a wired/wireless connection)
3. Change the default SSID
This video is suitable for users with a small number (1-3) of EAPs .
Больше Меньше
FAQ
- Announcement on Discontinuation of Facebook Wi-Fi
- Using Omada controller to configure multiple SSIDs with different VLANs on TP-Link Omada EAPs and Switches to work with a non-Omada gateway(Multi-Net NAT supported)
- API and Code Sample for External Portal Server (Omada Controller 2.6.0 to 3.2.17)
- API and Code Sample for External Portal Server (Omada Controller 2.5.4 or below)
- API and Code Sample for RADIUS Server with External Web Portal (Omada Controller 3.0.5 or below)
- How to Manage Omada Devices at Different Sites Using Omada SDN Controller via Port Forwarding (Controller 5.0 or Above)
- How to Manage Omada Devices at Different Sites Using Omada SDN Controller via VPN (Controller 5.0 or Above)
- В чём разница между главным администратором, администратором и посетителем в системе Omada?
- Как использовать команду Ping в приложении Omada
- Что такое двухэтапная аутентификация и как её включить в системе Omada
- Пример применения функции контроля доступа на EAP контроллере версии 2.2.3
- Should I Keep the Omada Controller Running After Configuration?
- Do I Need to Keep Omada Controller Running When Using Portal Authentication?
- Наиболее часто задаваемые вопросы по устройствам серии EAP
- How to configure Management VLAN in Standalone mode for EAP
- Configuration Guide on EAP-TLS authentication for WPA-Enterprise (with FreeRADIUS)
- An Example for theFree Authentication Policy Configuration on EAP (Cluster mode)
- How to Configure the Portal Function on the EAP (Cluster mode)
- How to Change the Default Ports for EAP Controller
- How to build a Campus Network using TP-LINK products
- How to build a Factory Network using TP-Link products
- How to build a Network for Restaurant & Cafe using tp-link products
- How to build a Wireless Network for Chain Store using tp-link products
- How to build a Wireless Network for Dormitory using tp-link products
- How to build a Wireless Network for School Canteen using tp-link products
- How to build a Wireless Network for Shopping Mall using tp-link products
- How to deploy EAP controller on a private cloud (AWS EC2)
- How to set up different SSIDs and Passwords for each EAP through EAP Controller
- How to manage EAPs in different subnets using Omada controller (via EAP Discover Utility) (Old UI)
- How to manage EAPs in different subnets using Omada Controller (via DHCP option 138) (Old UI)
- How to manage EAPs at different sites across Internet using Omada Controller (via VPN Tunnel with EAP Discover Utility) (Old UI)
- How to manage EAPs at different sites across Internet using Omada Controller (via VPN Tunnel with DHCP Option138) (Old UI)
- Как управлять по интернету точками доступа EAP, расположенными в разных локациях, с помощью контроллера Omada (через проброс порта NAT контроллера с помощью утилиты обнаружения точек доступа EAP)? [старый интерфейс]
- Как управлять по интернету точками доступа EAP, расположенными в разных локациях, с помощью контроллера Omada (через проброс портов NAT контроллера с помощью DHCP‑опции 138)? [старый интерфейс]
- How to manage EAPs in different VLANs using Omada Controller (Old UI)
- How to Change the Language of the Printed Voucher Code
- How to Configure Band Steering on TP-Link Omada Controller
- How to Configure Load Balance on Omada Controller
- How to Configure Reboot schedule and Wi-Fi Scheduler function of Omada Controller
- How to view detailed client information of an EAP
- How to manage EAPs in different subnets using Omada controller (via EAP Discovery Utility) (New UI)
- How to manage EAPs at different places across Internet using Omada Controller (via NAT Port Forwarding and DHCP Option 138) (New UI)
- How to use iPerf to test the speed between the EAP and the wireless client
- How to downgrade firmware of EAP if it is abnormal after the update
- What if I forget the password of EAP Controller?
- Overview of Omada EAP Power Supply
- Explanation of portal authentication failure after EAP is extended with Range Extenders
- How to configure Multiple SSIDs with Multiple Subnets on EAP products
- What is TP-Link EAP Beamforming?
- What should be noticed when running the EAP Controller for the first time?
- How to choose EAP products
- How do I find the firmware version of my EAP device?
- How do I upgrade the firmware of my EAP device via web browser?
- Q&A for TP-Link Omada App
- PoE Guide to TP-Link Access Points
- Troubleshooting of Wireless Issues for Omada EAP Products
- What should I do if I got a certificate error?
- How to adopt EAP in Controller Mode?
- How to Configure Omada Controller as a Windows Service(above Controller 2.5.4)
- How do I login to the web management page of the EAP Series products (Standalone mode)?
- What should I do when the Omada Software Controller (V3 or below) fails to discover the EAP?
- Source code template for External Web Portal (Standalone Mode)
- How to manage EAPs at different places across internet using Omada Controller (via NAT Port Forwarding and EAP Discovery Utility)? (New UI)
- How to configure basic wireless settings of my TP-Link EAP in Standalone mode?
- How to configure basic wireless settings of my TP-Link EAP via Omada Controller?
- Common questions about TP-Link EAP device when it’s used in home network
- What is TP-Link EAP/CAP MU-MIMO?
- How to set up rate limit through EAP controller
- What Is the Difference Between Login Account, Cloud Account, Device Account and User Account in Omada Controller?
- How to optimize wireless performance of EAP products
- How Do I Log into the Web Management Page of the EAP (Cluster mode)?
- What Can I Do If I Fail to Log In to the EAP via the Domain Name?
- Configure rogue AP detection on EAP/Omada Controller
- How to configure free authentication policy on EAP Controller
- What is TP-Link EAP/CAP Airtime Fairness?
- Understanding and Configuration of Cluster Mode
- How to Manage EAPs at Different Locations
- Hotspot authentication for multiple subnet with different VLANs
Приложение
- Omada APP
-
Приложение Omada компании TP‑Link позволяет выполнять настройку параметров, мониторинг сети и управление клиентскими устройствами прямо с телефона или планшета (список совместимых устройств).
Примечание: коммутаторы и маршрутизаторы SDN могут работать с приложением Omada только в режиме контроллера. Для работы приложения Omada необходимо обновить прошивку устройства до последней версии.