General questions about Deco
A: Yes, Deco is protected against the WPA2 security vulnerability known as KRACK.
What is KRACK exactly? Please read here: https://www.krackattacks.com/
To ensure your Deco is protected against KRACK, please update your Deco firmware to the latest version.
A: Currently, one Deco network can be controlled by owner account and manager account, but the multiple accounts can’t manage a Deco network at the same time.
No matter you are using an owner account or a manager account, only one user can log into the Deco app at the same time. If you log in while another user is already logged in to the Deco app, the new user will kick out the old one.
A: Both iOS and Android devices are supported. They must support Bluetooth 4.0 or later version as well. Requirements: iOS 9.0 or later, Android 4.4 or later.
A: Deco is designed to replace most home routers. If your old router need a modem to access the internet, then Deco should be used together with the existing modem.
A: Currently, Deco supports five internet connection types: PPPoE, Static IP, Dynamic IP, PPTP, and L2TP. That means Deco can work with most ISPs.
A: Your email address will be used:
- Verify your account.
- Reset your password
- Remote management of your Deco network
- Work with third-party integration such as Amazon Alexa
A: The Deco app allows you to enable both at the same time. However, please note that, if the settings conflict, activity QoS takes priority over individual devices.
Note: Some Deco models only support device QoS, such as Deco M4 and E4, etc.
A: Deco supports both wired and wireless connections.
For wireless devices, you only need to find Deco's Wi-Fi name on the client and connect with the Wi-Fi password.
You can also connect a device to the Deco network via an Ethernet cable, including PC, printers, TVs, etc. Each Deco provides two Ethernet ports on the back for wired devices. You can also connect a switch to the Ethernet port to expand the wired connections.
A: Sure! After successfully binding Deco units to a TP-Link ID, users can manage a Deco network via the Deco app on their smartphone or tablet, even outside the house.
Model |
2.4G |
5G |
Deco X60 |
2x2 MU-MIMO |
4x4 MU-MIMO |
Deco X20 |
2x2 MU-MIMO |
2x2 MU-MIMO |
Deco M5/P7/M9Plus/ E3/E4/M3/M4/S4 |
/ |
2x2 MU-MIMO |
Ez a GY.I.K. hasznos volt?
Véleménye segíti az oldal fejlesztését