Descarga para TL-WA850RE V1.20

Elige una versión de hardware:

V1.20

>¿Cómo encontrar la versión del hardware en un dispositivo TP-Link?

IMPORTANT: Model and hardware version availability varies by region. Please refer to your TP-Link regional website to determine product availability.
Manual

Setup Video

  • How to Configure a Range Extender for Starlink

  • How to set up a TP-Link Range Extender(No music)

  • How to set up a TP-Link Range Extender

Preguntas Frecuentes

Firmware

A firmware update can resolve issues that the previous firmware version may have and improve its current performance.

To Upgrade

IMPORTANT: To prevent upgrade failures, please read the following before proceeding with the upgrade process

  • Please upgrade firmware from the local TP-Link official website of the purchase location for your TP-Link device, otherwise it will be against the warranty. Please click here to change site if necessary.
  • Please verify the hardware version of your device for the firmware version. Wrong firmware upgrade may damage your device and void the warranty. (Normally V1.x=V1)
    ¿Cómo encontrar la versión del hardware en un dispositivo TP-Link?
  • Do NOT turn off the power during the upgrade process, as it may cause permanent damage to the product.
  • To avoid wireless disconnect issue during firmware upgrade process, it's recommended to upload firmware with wired connection unless there is no LAN/Ethernet port on your TP-Link device.
  • It's recommended that users stop all Internet applications on the computer, or simply disconnect Internet line from the device before the upgrade.
  • Use decompression software such as WinZIP or WinRAR to extract the file you download before the upgrade.

TL-WA850RE_V1.20_140310

Descargas
Fecha de Publicación : 2014-03-10 Idioma: Inglés Tamaño del Archivo : 3.65 MB

Modifications and Bug Fixes:

  1. Improved the performance of smart IP module
  2. Improved the status page
  3. Improved the system log module
  4. Added the blinking status to the signal lights
  5. Added support for the wireless network name in Chinese;
  6. Fixed the bug that the root router's WPA-PSK/WPA2-PSK encryption may be identified as WPA-PSK encryption in the repeater.
  7. Improved the WPS compatibility with some other routers such as Frizbox in Germany.
  8. Fixed the bug some smart phones such as the Samsung Galaxy series keep requesting for the wireless password although that has been remembered before.
  9.  

Notes:

For TL-WA850RE_V1.20.0 ,not applicable for V1.0

TL-WA850RE_V1.20_130922

Descargas
Fecha de Publicación : 2013-09-22 Idioma: Inglés Tamaño del Archivo : 3.28 MB

Modifications and Bug Fixes:

  1. Fixed a compatibility issue with Freebox v6 in France;
  2. Resolve compatibility issues with BT hub4
  3. Fixed a bug that Profile logs the local SSID information instead of that of Rootap, which cause that customer cannot connect Rootap through the related profile

Notes:

For TL-WA850RE V1.20,not applicable for V1.0

TL-WA850RE_V1.20_130313

Descargas
Fecha de Publicación : 2013-03-13 Idioma: Inglés Tamaño del Archivo : 3.54 MB

Modifications and Bug Fixes:

  1. Added a new function allowing users to modify the extened SSID;
  2. Supported bonjour applications;
  3. Added mandatory region selection;
  4. Fixed a bug that IPv6 DNS packet will delay the login process.

Notes:

For TL-WA850RE V1.20,not applicable for V1.0

Usar Firmware de Terceros en los Productos de TP-Link

 

Algunos firmware oficiales de los productos de TP-Link pueden ser sustituidos por el firmware de terceros como DD-WRT. TP-Link no está obligado a proporcionar el mantenimiento o soporte alguno para los mismos, y no garantiza el desempeño y la estabilidad del firmware de terceros. Los daños al producto como resultado del uso de firmware de terceros, anulará la garantía del producto.

 

Abrir el Código Fuente Para Programadores (GPL)

 

La siguiente información es para los programadores y no es necesaria para la mayoría de los usuarios particulares de TP-Link.

 

Los productos de TP-Link contienen en parte del código del software desarrollado por terceros, incluyendo el código del software sujeto a “GLP” (General Public Licence - Licencia Pública General) de GNU, Versión 1/Versión 2/Versión 3 o "LGPL" (Lesser General Public License – Licencia Pública General Reducida) de GNU. Puede usar la condición del software respectiva siguiendo los términos de la licencia de GPL.

 

Puede revisar, imprimir y descargar los términos respectivos de la licencia de GPL aquí. Usted recibe los códigos fuente de GPL del respectivo software utilizado en los productos de TP-Link para la descarga directa e información adicional, incluyendo una lista del software de TP-Link que contiene el código del software de GPL por el Centro de Códigos de GPL.

 

Los programas respectivos son distribuidos SIN NINGUNA GARANTÍA, incluso sin la garantía implícita de COMERCIABILIDAD o IDONEIDAD PARA UN PROPÓSITO PARTICULAR. Vea la Licencia Pública General respectiva de GNU para obtener más detalles.

  

Simuladores

Versión de Firmware
Working Mode
Idioma
130622
-
Inglés

Note:

1. This Emulator is a virtual web GUI where you can program your TP-Link product firmware. For details about an individual product’s features and specifications please use the search facility and go to the product page.

2. Please check the firmware version corresponds to the version shown on the Emulator interface. Each firmware version has its own GUI and functionality.

3. Please note that not all firmware versions are represented on the Emulator.

From United States?

Get products, events and services for your region.