Download for SG2005P-PD
Vx.0=Vx.6/Vx.8/Vx.9(eg:V1.0=V1.6/V1.8V1.9)
Vx.x0=Vx.x6/Vx.x8/Vx.x9 (eg:V1.20=V1.26/V1.28/1.29)
Vx.30=Vx.32/Vx.33 (eg:V3.30=V3.32/V3.33)
- Product Overview
Controller Software
The EAP Controller is used to manage multiple EAPs intensively.
Omada_SDN_Controller_v5.14.26.1_linux_x64.deb |
Download | |
---|---|---|
Published Date: 2024-07-10 | Language: Multi-language | File Size: 217.79 MB |
Operating System: Ubuntu 16.04/18.04/20.04/22.04, Debian 8/9/10 |
||
Omada_SDN_Controller_v5.14.26.1_linux_x64.tar.gz |
Download | |
---|---|---|
Published Date: 2024-07-10 | Language: Multi-language | File Size: 230.75 MB |
Operating System: Ubuntu 16.04/18.04/20.04/22.04, Debian 8/9/10 |
||
Omada_SDN_Controller_v5.14.26.1_Windows |
Download | |
---|---|---|
Published Date: 2024-07-10 | Language: Multi-language | File Size: 317.68 MB |
Operating System: Windows 7/8/10/11/Server |
||
Omada_SDN_Controller_v5.14.20.9_Windows |
Download | |
---|---|---|
Published Date: 2024-05-27 | Language: Multi-language | File Size: 317.48 MB |
Operating System: Windows 7/8/10/11/Server |
||
Omada_SDN_Controller_v5.13.30.8_linux_x64.deb |
Download | |
---|---|---|
Published Date: 2024-02-27 | Language: Multi-language | File Size: 189.79 MB |
Operating System: Ubuntu 16.04/18.04/20.04/22.04, Debian 8/9/10 |
||
As this version optimizes the WAN/LAN port configuration of Omada Gateway, it will cause some WAN ports to be enabled by default and cannot be disabled. This may result in changes to the load balance configuration, you can make the changes manually. |
Omada_SDN_Controller_v5.13.30.8_linux_x64.tar.gz |
Download | |
---|---|---|
Published Date: 2024-02-27 | Language: Multi-language | File Size: 202.04 MB |
Operating System: Ubuntu 16.04/18.04/20.04/22.04, Debian 8/9/10 |
||
As this version optimizes the WAN/LAN port configuration of Omada Gateway, it will cause some WAN ports to be enabled by default and cannot be disabled. This may result in changes to the load balance configuration, you can make the changes manually. |
Omada_SDN_Controller_v5.13.30.8_Windows |
Download | |
---|---|---|
Published Date: 2024-02-05 | Language: Multi-language | File Size: 283.05 MB |
Operating System: Windows 7/8/10/11/Server |
||
As this version optimizes the WAN/LAN port configuration of Omada Gateway, it will cause some WAN ports to be enabled by default and cannot be disabled. This may result in changes to the load balance configuration, you can make the changes manually. |
Omada Discovery Utility
Omada Discovery Utility 5.2.1 |
Download | |
---|---|---|
Published Date: 2024-08-05 | Language: English | File Size: 40.51 MB |
Operating System: Windows/Mac OS/Linux |
||
Enhancements & Fixed Bugs: Optimized some functions and fixed bugs.
Note: 1. To run this software, you need to install JRE 8.0 on your PC first. 2. Double-click the software or run the command "java -jar **.jar" to run the software on MacOS (**.jar is the name of this software). 3. Omada Controller and Discover Utility cannot run on the same computer at the same time. |
Omada Discovery Utility 5.2.0 |
Download | |
---|---|---|
Published Date: 2024-05-06 | Language: English | File Size: 40.04 MB |
Operating System: Windows/Mac OS/Linux |
||
New Feature/Enhancement: 1. Adapt to Omada SDN Controller v5.14.20. 2. Added support for Easy Managed Switch and OLT device identification and inform url. |
MIBs Files
TP-Link_L2 Switch_MIB |
Download | |
---|---|---|
Published Date: 2024-02-29 | Language: English | File Size: 199.18 KB |
Operating System: Windows/Mac OS/Linux |
||
|
FAQs
- Omada Switch DHCP Relay Configuration Guide
- Suggested configurations for AVoIP protocols on Omada Switches
- How to configure MVR on Omada Switches via Omada Controller
- How to configure MLD Snooping on Omada Switches
- How to configure Class of Service (CoS) through Omada Controller
- How to configure Auto-VoIP on Omada Switches via Omada Controller
- How to configure LLDP & LLDP-MED on Omada Switches via Omada Controller
- Configuration guide of DHCP Options on Omada Switch
- Troubleshooting of Layer 2 Multicast Failure
- How to configure TACACS+ Authentication on switches via Omada Controller
- How to configure IGMP Snooping on Omada switches for hotel IPTV scenario
- How to configure 802.1X VLAN Assignment on Omada Controller
- Recommended ACL configuration on Omada Switch for common scenarios
- How to configure AAA to assign different privileges for radius users to login on Omada Switch
- Getting started without an Omada Controller
- How to configure Management VLANs for Omada Switches and APs (for SOHO scenario)
- How to configure Management VLANs for Omada Switches and APs (for Business scenario)
- How to configure Voice VLAN on Omada Switches using Omada Controller
- How to configure 802.1Q VLAN on Omada Switches when used with a third-party router
- What should I do if my switch has no Internet access?
- What should I do if my Internet from switch is unstable?
- How to setup Switch as DHCP server on Omada Controller
- How to configure DHCP Auto Install to let switch get configuration file and image from TFTP server
- How to build an 802.1X access authentication system using Switches on Omada Controller
- How do I know the type of my Omada switch?
- How to configure VLAN Interfaces and Static Routes on Omada Switches
- Troubleshooting for Voice VLAN and Auto VoIP
- Troubleshooting for 802.1X (Dot1X) Authentication Fails on Omada Switch
- Troubleshooting for RADIUS Authentication Failure
- What to do if devices in the same VLAN fail to communicate with each other when connected to TP-Link switch
- What to do if Omada Device Adoption Failure
- How to Configure LAG (LACP) on Omada Switches in Controller Mode
- Best practice to prevent network loops with Omada SDN solution
Firmware
A firmware update can resolve issues that the previous firmware version may have and improve its current performance.
To Upgrade
IMPORTANT: To prevent upgrade failures, please read the following before proceeding with the upgrade process
- Please upgrade firmware from the local TP-Link official website of the purchase location for your TP-Link device, otherwise it will be against the warranty. Please click here to change site if necessary.
- Please verify the hardware version of your device for the firmware version. Wrong firmware upgrade may damage your device and void the warranty. (Normally V1.x=V1)
How to find the hardware version on a TP-Link device - Do NOT turn off the power during the upgrade process, as it may cause permanent damage to the product.
- To avoid wireless disconnect issue during firmware upgrade process, it's recommended to upload firmware with wired connection unless there is no LAN/Ethernet port on your TP-Link device.
- It's recommended that users stop all Internet applications on the computer, or simply disconnect Internet line from the device before the upgrade.
- Use decompression software such as WinZIP or WinRAR to extract the file you download before the upgrade.
SG2005P-PD(UN)_V1.6_1.0.3 Build 20240807 |
Download | |
---|---|---|
Published Date: 2024-08-23 | Language: English | File Size: 10.91 MB |
SG2005P-PD(UN)_V1.6_1.0.2 Build 20240530 |
Download | |
---|---|---|
Published Date: 2024-06-24 | Language: English | File Size: 11.21 MB |
Bug Fixed: 1. Fix the issue that when SG2005P-PD is first powered by 802.11at and then switched to 802.11bt, the power supplied to the back-end PDs is insufficient and needs to be modified manually.
Notes: 1. This firmware is fully adapted to Omada SDN Controller v5.9 and above. 2. Your device’s configuration won’t be lost after upgrading.
|
SG2005P-PD(UN)_V1.6_1.0.1 Build 20231013 |
Download | |
---|---|---|
Published Date: 2023-12-11 | Language: English | File Size: 10.99 MB |
To Use Third Party Firmware In TP-Link Products
Some official firmware of TP-Link products can be replaced by the third party firmware such as DD-WRT. TP-Link is not obligated to provide any maintenance or support for it, and does not guarantee the performance and stability of third party firmware. Damage to the product as a result of using third party firmware will void the product's warranty.
Open Source Code For Programmers (GPL)
Please note: The products of TP-Link partly contain software code developed by third parties, including software code subject to the GNU General Public Licence (“GPL“), Version 1/Version 2/Version 3 or GNU Lesser General Public License ("LGPL"). You may use the respective software condition to following the GPL licence terms.
You can review, print and download the respective GPL licence terms here. You receive the GPL source codes of the respective software used in TP-Link products for direct download and further information, including a list of TP-Link software that contain GPL software code under GPL Code Center.
The respective programs are distributed WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the respective GNU General Public License for more details.
Apps
- Omada APP
TP-Link Omada lets you configure settings, monitor network status and manage clients, all from the convenience of a smart phone or tablet. Learn more about Compatible Devices.
Note: SDN switch/router is compatible with Omada App only in controller mode. To use Omada, please update your device's firmware to the latest version.
GPL Code
Emulators
Firmware Version |
Working Mode |
Language |
|
---|---|---|---|
20230801 |
- |
English |
Note:
1. This Emulator is a virtual web GUI where you can program your TP-Link product firmware. For details about an individual product’s features and specifications please use the search facility and go to the product page.
2. Please check the firmware version corresponds to the version shown on the Emulator interface. Each firmware version has its own GUI and functionality.
3. Please note that not all firmware versions are represented on the Emulator.