下載 VIGI NVR1008H
- Manual
VIGI Security Manager
VIGI Security Manager_setup_1.5.29 |
下載 | |
---|---|---|
發佈日期: 2023-09-22 | 語言: 多語言 | 檔案大小: 91.00 MB |
作業系統: Windows |
||
1. 修復某些問題並改善穩定性。 |
VIGI Security Manager_V1.3.2.0 |
下載 | |
---|---|---|
發佈日期: 2023-01-04 | 語言: 多語言 | 檔案大小: 105.41 MB |
作業系統: Windows |
||
1. 支援智慧偵測功能 (只能在特定型號上使用)。 請在使用新出的型號前,將 VIGI Security Manager 更新至最新版。 |
VIGI Security Manager_V1.2.2 |
下載 | |
---|---|---|
發佈日期: 2022-11-08 | 語言: 多語言 | 檔案大小: 104.93 MB |
作業系統: WinXP/Win7/Win8/Win8.1/Win10 |
||
1. 支援匯出/匯入設備設定檔以批次設定設備。 |
VIGI Security Manager_V1.1.8.0 |
下載 | |
---|---|---|
發佈日期: 2022-10-09 | 語言: 多語言 | 檔案大小: 104.82 MB |
作業系統: WinXP/Win7/Win8/Win8.1/Win10 |
||
修復問題並改善穩定性。 |
VIGI Security Manager_setup_1.1.7 |
下載 | |
---|---|---|
發佈日期: 2022-07-22 | 語言: 多語言 | 檔案大小: 104.83 MB |
作業系統: WinXP/Win7/Win8/Win8.1/Win10 |
||
1. 新增 NVR 頻道管理功能。 |
VIGI Security Manager V1.0.13 |
下載 | |
---|---|---|
發佈日期: 2021-04-09 | 語言: 多語言 | 檔案大小: 101.71MB |
作業系統: WinXP/Win7/Win8/Win8.1/Win10 |
||
New Feature/Enhancement: Note: |
Setup Video
-
How to Setup Tapo Wireless Camera with VIGI NVR
00:00 - Introduction 00:08 - Connection Diagram 00:13 - Setting up the Tapo camera ONVIF account 00:37 - Adding the Tapo camera in the VIGI NVR 02:36 - Fix Tapo camera IP address on router 03:00 - Controlling the Tapo camera from the NVR
更多 折疊 -
How to Manage VIGI Cameras and NVRs Using VIGI Security Manager
This video demonstrates how to manage VIGI cameras and NVRs using VIGI Security Manager in two scenarios: • using VIGI Security Manager in your local network • using VIGI Security Manager remotely THIS VIDEO APPLIES TO: All VIGI Cameras and NVRs
更多 折疊 -
How to Manage VIGI Cameras via VIGI NVR
This video demonstrates how to manage VIGI cameras via VIGI NVR. It consists of three steps: • Connect the hardware. • Set up VIGI NVR and add VIGI cameras. • Bind VIGI NVR to TP-Link ID for remote management. THIS VIDEO APPLIES TO: • All VIGI Products
更多 折疊 -
How to Manage VIGI Cameras and NVRs via VIGI App
This video demonstrates how to manage VIGI cameras and NVRs via the VIGI app. It consists of three steps: • Launch the VIGI app. • Add devices using the VIGI app. • View the recordings and configure the settings. • Enable alerts to get instant alerts This video applies to: • All VIGI VIGI Cameras and NVRs
更多 折疊 -
Introduction to Install VIGI Products and Overview of Three Management Methods
This video shows how to install VIGI products and introduces three management methods. VIGI products are easy to be installed, and with three management methods, you can customize the management systems to suit your specific needs.
更多 折疊
常見問題
- How to use recovery mode to recover firmware for VIGI Camera and NVR
- 如何透過 VIGI Security Manager 在電腦上設定錄製和回放?
- 我如何才能查看 VIGI 攝影機的24小時錄製影像?
- 如何為 VIGI NVR 選擇適合的硬碟?
- 忘記 VIGI NVR 密碼怎麼辦?
- 如何更新VIGI NVR韌體?
- 如何將 VIGI NVR 重設還原出廠預設值?
- 如何在VIGI NVR更改VIGI攝影機的密碼及接收驗證碼的電子信箱?
- VIGI 常見問題
- 如何開始使用 TP-Link VIGI App
- 在監控系統中如何避免IP位址衝突?