下載 T2600G-52TS V3

請選擇硬體版本:

>如何查看 TP-Link 產品的硬體版本？

重要: 型號和硬體版本的可用性因地區而異。請至您地區的 TP-Link 官網查看可用的產品。

Product Overview

T2600G-52TS(UN)_V3_Datasheet

Manual

MIB檔案

T2600G-52TS(UN)_V3_MIB_20180202

下載

發佈日期: 2018-03-14

語言: 英語

檔案大小: 198.78 KB

作業系統: Win2000/XP/2003/Vista/7/8/8.1/10/Mac/Linux

802.1X使用者端

TP-LINK_802.1X_Client_Software

下載

發佈日期: 2017-09-05

語言: 英語

檔案大小: 5.5MB

作業系統: Win2000/XP/2003/Vista/7/8/8.1/10

Driver

TP-LINK_USB_Console_Driver

下載

發佈日期: 2019-03-13

語言: 英語

檔案大小: 3.10 MB

作業系統: Win2000/XP/2003/Vista/7/8/8.1/10

Notes:

For TP-LINK switches with USB Console port

常見問題

如何透過 Console Port 存取 Omada 管理型交換器 11-08-2024362111
如何使用新介面在 L2 管理型交換器上設定 MSTP 07-19-202262862
如何在智慧型和管理型交換器上使用新GUI設定802.1Q VLAN? 10-02-2019161216
How to configure LACP on our Smart/ Managed Switch 10-29-2024234593
如何在L2管理型交換器設定DHCP中繼(DHCP Relay) 01-15-202481403
如何在新GUI的L2管理型交換器為IPTV網路設定IGMP Snooping？ 03-29-2019173364
如何在 TP-Link 交換器上測試 Jumbo Frame 穿透功能? 10-21-2024184245
How to Block Unknown Devices to Access the Switch by Using IP Source Guard 08-09-202475541
Why the firmware version does not change after upgrading in T Series switches? 08-09-202462231
如何使用 L2 交換器設定 IGMP 偵聽提供 IPTV 網路? 10-08-2021223008
How to configure the default gateway of the smart and managed switches using the old GUI 08-09-2024256686
What is the Console Cable and the line sequence of it? 08-02-2024127592
TP-Link 交換器的SFP埠疑難排解 10-19-202385258
Voice VLAN 和 Auto VOIP 功能差異 03-18-202179433
How to configure DHCP VLAN Relay on L2 Managed switches using the new GUI 07-23-2024145192
What should I do if I cannot access the web management page of my TP-Link switch? 07-23-2024346394
Do you still have any doubt about the effect of QoS on the Switch of TP-Link? 07-23-202488869
如何在 TP-Link 智慧型和管理型交換器上設定 Voice VLAN 來最佳化語音流量傳輸（新介面） 07-09-2024110371
How to block an illegal client with Certain IP address from getting access to the network using TP-Link Managed Switches 07-01-202478622
如何透過 Console 線進入 BootUtil 選單將管理型交換器恢復出廠設定 04-09-2024129187
如何使用智慧型和 L2 管理型交換器上設定 MAC ACL（新介面） 01-17-202459889
如何使用 TP-Link 路由器搭配 L2+ / L3 交換器的 Multi-Nets NAT 功能建立多網段網路架構 12-25-2023323461
如何透過 Micro USB 線管理交換器 11-21-202348871
如何使用新 GUI 為智慧型和管理型交換器上的 LAG 連接埠設定 802.1Q VLAN 09-23-202389585
如何在交換器上透過 TACACS+ Server 取得 AAA 驗證 05-11-202358967
如何在 L2 網管型交換器上設定 802.1Q 標籤 VLAN 11-21-2011420806
How to Configure Port Isolation Function on Our Layer 2 Manage switches through Web Browser 06-29-2022127353
How to limit the port rate of the incoming traffic via ACL function 06-28-202258836
How to configure Getting Time from NTP Server on TP-Link Smart & Managed Switch 06-28-2022227566
How to change the IP address of the smart and managed switches using the old GUI and CLI 06-28-2022324980
How to configure MAC ACL on Smart/Managed switch 06-28-202284439
How to configure the DHCP Relay in TP-Link Switch 06-27-2022255310
如何在智慧型和 L2 管理型交換器的頁面設定預設閘道? 10-07-2021162499
如何在TP-Link 智慧/管理型交換器升級新版GUI時，設定backup image? 06-07-202258843
How to configure VLAN VPN on L2 Managed switches using the new GUI 06-27-202265493
How to configure Access Control to block users' access to the switch using the new GUI 06-27-202270447
為何登入交換器後某些功能不見了？ 03-26-201948888
How to configure OpenSSH 7.0(and above) to login smart and managed switches? 04-17-2018132893
The nodes that TP-Link T1600/T2600 series switch use to display the CPU and Memory utilization through SNMP 12-26-201668396
How to configure Extended IP ACL 04-28-201284845

T2600G-52TS(UN)_V3_181101

下載

發佈日期: 2018-12-11

語言: 英語

檔案大小: 10.87 MB

Modifications and Bug Fixes:
1. Enhanced the MVR function.
2. Add the CLI command of "switchport general allowed vlan all/no switchport general allowed vlan all".
3. Support EtherLike-Mib.
4. Fix the bug that the IP in circuit-ID is wrong when the VLANs which the port belong to does not set up interface and PPPoE IP insertion is IP mode.
5. Fix the bug that NTP server will be changed when set up only one NTP server and fail to get the time.
6. Fix the bug that cannot set up auto mode for fiber ports which in portchannel.
7. Fix the bug that access control entries will not take effect when two or more entries are added for port binding.

Notes:
1. For T2600G-52TS(UN) V3.0.
2. If your device's Hardware Version is 2.0, after upgrading to this firmware, the old configuration will be lost.

T2600G-52TS(UN)_V3_180202

下載

發佈日期: 2018-03-14

語言: 英語

檔案大小: 10.86 MB

Modifications and Bug Fixes
1. Fix the problem of client's unicast DHCP Request packet will flooding when enable DHCP Server.
2. Fix the problem of using Web to add the Action first time after binding ACL rules.
3. Fix the problem of SNMP set one wrong OID of the Port Mirror may crash the switch.
4. Fix the problem of shutdown of Storm Control can't be saved.
5. Fix the problem of the configuration of Protocol VLAN binding to all ports will be lost after rebooting.

Notes
1. For T2600G-52TS(UN) V3.0

2. If your device's Hardware Version is 2.0, after upgrading to this firmware, the old configuration will be lost.