下載 T2600G-28TS
- Product Overview
2.0_1500543408797k.jpg)
JetStream 24-Port Gigabit L2 Managed Switch with 4 SFP SlotsMIB檔案
|
T2600G-28TS(UN)_V2_170928_MIB |
下載 | |
|---|---|---|
| 發佈日期: 2017-09-28 | 語言: 英語 | 檔案大小: 183.07 KB |
作業系統: Win2000/XP/2003/Vista/7/8/8.1/10 |
||
|
|
||
|
T2600G-28TS(UN)_V2_MIB_170323 |
下載 | |
|---|---|---|
| 發佈日期: 2017-03-23 | 語言: 英語 | 檔案大小: 196.45 KB |
作業系統: Win2000/XP/2003/Vista/7/8/8.1/10/Mac/Linux |
||
|
|
||
|
T2600G-28TS(UN)_V2_170118_MIB |
下載 | |
|---|---|---|
| 發佈日期: 2017-01-18 | 語言: 英語 | 檔案大小: 189.55 KB |
作業系統: Win2000/XP/2003/Vista/7/8/8.1/10/Mac/Linux |
||
|
|
||
802.1X使用者端
|
TP-LINK_802.1X_Client_Software |
下載 | |
|---|---|---|
| 發佈日期: 2017-09-05 | 語言: 英語 | 檔案大小: 5.5MB |
作業系統: Win2000/XP/2003/Vista/7/8/8.1/10 |
||
|
|
||
Driver
|
TP-LINK_USB_Console_Driver |
下載 | |
|---|---|---|
| 發佈日期: 2019-03-13 | 語言: 英語 | 檔案大小: 3.10 MB |
作業系統: Win2000/XP/2003/Vista/7/8/8.1/10 |
||
|
Notes: For TP-LINK switches with USB Console port |
||
常見問題
- 如何透過 Console Port 存取 Omada 管理型交換器
- How to configure LACP on our Smart/ Managed Switch
- 如何在 TP-Link 交換器上測試 Jumbo Frame 穿透功能?
- How to Block Unknown Devices to Access the Switch by Using IP Source Guard
- Why the firmware version does not change after upgrading in T Series switches?
- 如何使用 L2 交換器設定 IGMP 偵聽提供 IPTV 網路?
- How to configure the default gateway of the smart and managed switches using the old GUI
- What is the Console Cable and the line sequence of it?
- How to build a Campus Network using TP-LINK products
- Voice VLAN 和 Auto VOIP 功能差異
- What should I do if I cannot access the web management page of my TP-Link switch?
- Do you still have any doubt about the effect of QoS on the Switch of TP-Link?
- 如何在 TP-Link 智慧型和管理型交換器上設定 Voice VLAN 來最佳化語音流量傳輸（新介面）
- How to block an illegal client with Certain IP address from getting access to the network using TP-Link Managed Switches
- 如何使用 TP-Link 路由器搭配 L2+ / L3 交換器的 Multi-Nets NAT 功能建立多網段網路架構
- 如何在 L2 網管型交換器上設定 802.1Q 標籤 VLAN
- How to Configure Port Isolation Function on Our Layer 2 Manage switches through Web Browser
- How to limit the port rate of the incoming traffic via ACL function
- How to change the IP address of the smart and managed switches using the old GUI and CLI
- How to configure MAC ACL on Smart/Managed switch
- How to configure the DHCP Relay in TP-Link Switch
- 如何使用新版GUI和CLI更改智慧型交換器和L2管理型交換器的IP位址？
- How to configure OpenSSH 7.0(and above) to login smart and managed switches?
- The nodes that TP-Link T1600/T2600 series switch use to display the CPU and Memory utilization through SNMP
- How to configure Extended IP ACL
|
T2600G-28TS(UN)_V2_170928 |
下載 | |
|---|---|---|
| 發佈日期: 2017-09-28 | 語言: 英語 | 檔案大小: 10.58 MB |
|
Modifications and Bug Fixes: Fixed the problem that DHCP request will be intercepted when enable IP Source Guard;Fixed the problem that incorrect SNMP typing might hang the switch; Enhanced the DHCP relay functions; Enhanced the QoS function. Notes: For T2600G-28TS(UN) V2 |
||
|
T2600G-28TS(UN)_V2_170527 |
下載 | |
|---|---|---|
| 發佈日期: 2017-05-27 | 語言: 英語 | 檔案大小: 10.81 MB |
|
Modifications and Bug Fixes: New Features/Enhancement: |
||
|
T2600G-28TS(UN)_ V2_170323 |
下載 | |
|---|---|---|
| 發佈日期: 2017-03-23 | 語言: 英語 | 檔案大小: 10.70 MB |
|
Modifications and Bug Fixes: New Features/Enhancement: |
||