下載 T2600G-28TS
重要: 型號和硬體版本的可用性因地區而異。請至您地區的 TP-Link 官網查看可用的產品。
- Product Overview
MIB檔案
|
T2600G-28TS(UN)_V1_MIB_160412 |
下載 | |
|---|---|---|
| 發佈日期: 2016-04-12 | 語言: 英語 | 檔案大小: 181 KB |
作業系統: Win2000/XP/2003/Vista/7/8/8.1/10/Mac/Linux |
||
|
Notes: For T2600G-28TS(UN)_v1 |
||
|
T2600G-28TS_V1_MIB_151216 |
下載 | |
|---|---|---|
| 發佈日期: 2015-12-16 | 語言: 英語 | 檔案大小: 175 KB |
作業系統: Win2000/XP/2003/Vista/7/8/8.1/10/Mac/Linux |
||
|
Notes: For T2600G-28TS_V1. |
||
|
T2600G-28TS_V1_MIBs_150604 |
下載 | |
|---|---|---|
| 發佈日期: 2015-10-14 | 語言: 英語 | 檔案大小: 144 KB |
作業系統: Win2000/XP/2003/Vista/7/8/8.1/10/Mac/Linux |
||
|
Notes: For T2600G-28TS_V1_150604 |
||
802.1X使用者端
|
TP-LINK_802.1X_Client_Software |
下載 | |
|---|---|---|
| 發佈日期: 2017-09-05 | 語言: 英語 | 檔案大小: 5.5MB |
作業系統: Win2000/XP/2003/Vista/7/8/8.1/10 |
||
|
|
||
Driver
|
TP-LINK_USB_Console_Driver |
下載 | |
|---|---|---|
| 發佈日期: 2019-03-13 | 語言: 英語 | 檔案大小: 3.10 MB |
作業系統: Win2000/XP/2003/Vista/7/8/8.1/10 |
||
|
Notes: For TP-LINK switches with USB Console port |
||
|
TP-LINK_USB_Console_Driver |
下載 | |
|---|---|---|
| 發佈日期: 2016-06-16 | 語言: 英語 | 檔案大小: 3.02 MB |
作業系統: Win2000/XP/2003/Vista/7/8/8.1/10/ |
||
|
Notes: USB Console Driver for TP-LINK Managed Switch with USB Console port. |
||
常見問題
- 如何透過 Console Port 存取 Omada 管理型交換器
- How to configure LACP on our Smart/ Managed Switch
- 如何在 TP-Link 交換器上測試 Jumbo Frame 穿透功能?
- How to Block Unknown Devices to Access the Switch by Using IP Source Guard
- Why the firmware version does not change after upgrading in T Series switches?
- 如何使用 L2 交換器設定 IGMP 偵聽提供 IPTV 網路?
- How to configure the default gateway of the smart and managed switches using the old GUI
- What is the Console Cable and the line sequence of it?
- How to build a Campus Network using TP-LINK products
- Voice VLAN 和 Auto VOIP 功能差異
- What should I do if I cannot access the web management page of my TP-Link switch?
- Do you still have any doubt about the effect of QoS on the Switch of TP-Link?
- 如何在 TP-Link 智慧型和管理型交換器上設定 Voice VLAN 來最佳化語音流量傳輸（新介面）
- How to block an illegal client with Certain IP address from getting access to the network using TP-Link Managed Switches
- 如何使用 TP-Link 路由器搭配 L2+ / L3 交換器的 Multi-Nets NAT 功能建立多網段網路架構
- 如何在 L2 網管型交換器上設定 802.1Q 標籤 VLAN
- How to Configure Port Isolation Function on Our Layer 2 Manage switches through Web Browser
- How to limit the port rate of the incoming traffic via ACL function
- How to change the IP address of the smart and managed switches using the old GUI and CLI
- How to configure MAC ACL on Smart/Managed switch
- How to configure the DHCP Relay in TP-Link Switch
- How to configure OpenSSH 7.0(and above) to login smart and managed switches?
- The nodes that TP-Link T1600/T2600 series switch use to display the CPU and Memory utilization through SNMP
- How to configure Extended IP ACL
|
T2600G-28TS(UN)_V1_160412 |
下載 | |
|---|---|---|
| 發佈日期: 2016-04-12 | 語言: 英語 | 檔案大小: 14.22 MB |
|
Modifications and Bug Fixes: 1.Enhanced the performance of the Voice VLAN.2.Add new features in the SNMP and its MIB file. Notes: 1.For T2600G-28TS(UN)_v1;2.Upgrading the firmware will only upgrade the backup image; 3.Your device’s configuration won't be lost after upgrading. |
||
|
T2600G-28TS_V1_151216 |
下載 | |
|---|---|---|
| 發佈日期: 2015-12-16 | 語言: 英語 | 檔案大小: 14.22 MB |
|
Modifications and Bug Fixes: New Features/Enhancement:1. IPv6 static routing, IPv6 ACL and DHCPv6 snooping are supported. 2. Added new features Serial Port Settings, Password Recovery and User Account Setting 3. New features L2PT, sFlow, OAM, VLAN VPN, DHCP relay, PPPoE Circuit ID are supported. 4. Enhanced ACL, Multicast, 802.1x. Notes: 1. For T2600G-28TS_V1.2. As many features have been enhanced, the configuration may be lost after upgrading, and it is not suggested to import the old config file to the device after upgrading. |
||
|
T2600G-28TS_V1_150604 |
下載 | |
|---|---|---|
| 發佈日期: 2015-10-14 | 語言: 英語 | 檔案大小: 14.00 MB |
|
Modifications and Bug Fixes: First firmware release of T2600G-28TS Notes: For T2600G-28TS V1 |
||