下載 T2600G-28TS V4

請選擇硬體版本:

重要: 型號和硬體版本的可用性因地區而異。請至您地區的 TP-Link 官網查看可用的產品。

Product Overview

T2600G-28TS(UN)_V4_Datasheet

Manual

JetStream 24埠 Gigabit L2管理型交換器(含4個SFP插槽)
T2600G-28TS

MIB檔案

T2600G-28TS(UN)_v4_MIB_20190530		下載
發佈日期: 2019-09-25	語言: 英語	檔案大小: 200.33 KB
作業系統: Win2000/XP/2003/Vista/7/8/8.1/10/Mac/Linux

T2600G-28TS(UN)_V4_MIB_20181010		下載
發佈日期: 2019-05-13	語言: 英語	檔案大小: 206.12 KB
作業系統: Win2000/XP/2003/Vista/7/8/8.1/10/Mac/Linux

802.1X使用者端

TP-LINK_802.1X_Client_Software		下載
發佈日期: 2017-09-05	語言: 英語	檔案大小: 5.5MB
作業系統: Win2000/XP/2003/Vista/7/8/8.1/10

Driver

TP-LINK_USB_Console_Driver		下載
發佈日期: 2019-03-13	語言: 英語	檔案大小: 3.10 MB
作業系統: Win2000/XP/2003/Vista/7/8/8.1/10
Notes: For TP-LINK switches with USB Console port

常見問題

如何使用 TP-Link 路由器搭配 L2+ / L3 交換器的 Multi-Nets NAT 功能建立多網段網路架構 12-25-2023275116
如何使用新 GUI 為智慧型和管理型交換器上的 LAG 連接埠設定 802.1Q VLAN 09-23-202373367
如何透過主控連接埠存取 L2 網管型交換器？ 11-21-2011298150
如何在 L2 網管型交換器上設定 802.1Q 標籤 VLAN 11-21-2011378959
How to Configure Port Isolation Function on Our Layer 2 Manage switches through Web Browser 06-29-2022105570
How to limit the port rate of the incoming traffic via ACL function 06-28-202248658
如何在 TP-Link 交換器上測試巨型訊框穿透功能? 09-24-2021158476
How to build up an 802.1X access authentication system using TP-Link switch 06-28-2022101630
How to change the IP address of the smart and managed switches using the old GUI and CLI 06-28-2022280860
How to configure LACP on our Smart/ Managed Switch 06-28-2022200795
How to configure MAC ACL on Smart/Managed switch 06-28-202271075
如何使用 L2 交換器設定 IGMP 偵聽提供 IPTV 網路? 10-08-2021190614
How to configure the default gateway of the smart and managed switches using the old GUI 06-28-2022217759
How to build a Campus Network using TP-LINK products 06-28-202274723
How to configure the DHCP Relay in TP-Link Switch 06-27-2022226599
如何在 TP-Link 智慧型和管理型交換器上設定 Voice VLAN 優化語音封包傳輸? 04-08-202192837
Why the Firmware Version Does Not Change after Upgrading in T Series Switches? 07-20-202152936
What should I do if I cannot access the web management page of my TP-Link switch? 07-20-2021286627
Voice VLAN 和 Auto VOIP 功能差異 03-18-202161065
How to configure OpenSSH 7.0(and above) to login smart and managed switches? 04-17-2018114019
Do you still have any doubt about the effect of QoS on the Switch of TP-Link? 12-29-201676896
The nodes that TP-Link T1600/T2600 series switch use to display the CPU and Memory utilization through SNMP 12-26-201657025
What is the Console Cable and the line sequence of it? 06-23-2016102659
How to Block Unknown Devices to Access the Switch by Using IP Source Guard 01-07-201663106
How to Block an illegal client with Certain IP address from getting access to the network using TP-Link Managed Switches 12-17-201566359
How to configure Extended IP ACL 04-28-201270571

T2600G-28TS(UN)_V4_20191112		下載
發佈日期: 2019-12-31	語言: 英語	檔案大小: 17.14 MB
New Features/Enhancements: 1. Add the feature that needs to change the password when login for the first time. 2. Add the feature that can choose not to change the IP address when resetting the switch. 3. Add "service reset-disable" for removing reset option from Bootutil. 4. Add built-in Telnet client which allows the switch can telnet other devices. 5. Allow disabling HTTP and HTTPS for access types at the same time. 6. Optimize the password character set to support more special characters. 7. Optimize the BPDU Filter feature to make ports not send out BPDU packets when BPDU Filter is enabled. 8. Optimized the CLI display of MVR configurations. 9. Support to display MVR members of inactive and active groups. 10. Support to view/clear mac-address table on port/VLAN. 11. Support to fill in file name with folder path when using SNMP or CLI to upgrade firmware or restore config file through TFTP. Notes: 1. For T2600G-28TS(UN) V4.0 2. Your device's configuration will not be lost after upgrading, which means you don't need to configure your device again after upgrading. 3. After upgrading, it cannot downgrade to the old version firmware because of the encryption rule has changed.

T2600G-28TS(UN)_V4_20190530		下載
發佈日期: 2019-07-11	語言: 英語	檔案大小: 17.10 MB
Modifications and Bug Fixes: 1. Update HTTPS to support TLS1.2. 2. Fix the bug that the settings of SNMP Community/Notification/Trap will lose after rebooting the switch when turning off the global switch of SNMP function. 3.Fix the bug that the IP in circuit-ID is wrong when the VLANs which the port belong to does not set up the interface and PPPoE IP insertion is IP mode. 4. Fix the bug that NTP server will be changed when setting up only one NTP server and fail to get the time. 5. Fix the bug that cannot set up auto mode for fibre ports which in the port channel. 6. Fix the bug that access control entries will not take effect when two or more entries are added for port binding. Notes: For T2600G-28TS(UN) V4.0.