Download for G36W-4G
Vx.0=Vx.6/Vx.8/Vx.9(eg:V1.0=V1.6/V1.8V1.9)
Vx.x0=Vx.x6/Vx.x8/Vx.x9 (eg:V1.20=V1.26/V1.28/1.29)
Vx.30=Vx.32/Vx.33 (eg:V3.30=V3.32/V3.33)
Omada Pro 4G+ Cat6 AX3000 Gigabit VPN RouterFAQs
- How to configure a LAN network on Omada Gateway: Normal vs. Bridge Mode
- How to configure IPTV / IGMP Proxy on Omada Gateway
- How to configure VLAN on Omada Gateway via Omada Controller
- How to configure Policy Routing on Omada Gateway via Omada Controller
- How to configure Wireguard VPN on Omada Gateway
- How to troubleshoot Port Forwarding Failure on Omada Gateway
- How to troubleshoot Load Balance Failure on Omada Gateway
- Troubleshooting guide for mDNS Repeater cannot work on the Omada Gateway
- How to configure mDNS via Omada Controller
- How to configure LDAP on Omada Gateway
- How to configure Custom DDNS on Omada Gateway via Omada Controller
- How to configure Quality of Service on Omada Gateway via Omada Controller
- How to configure OSPF on Omada Gateway via Standalone Webpage
- How to set up Site-to-Site Manual IPsec VPN Tunnels on Omada Gateway via Omada Controller
- How to configure OpenVPN on Omada Gateway via Omada Controller
- How to eliminate WAN IP address Obtaining Failed alert
- How to configure GRE VPN on the Omada Gateway in Standalone Web
- How to configure DNS Proxy on the Omada Gateway
- The differences and similarities between Load Balancing and Link Backup
- How to configure DPI on Omada Gateway via Omada Controller
- How to configure VLAN on Omada Gateway via Omada Controller
- How to configure DHCP Server on Omada Gateway via Omada Controller
- How do I upgrade firmware of Omada Gateway in Standalone web?
- What should I do if my IPsec VPN connection fails?
- How to configure Load Balancing on Omada Gateway via Omada Controller
- What should I do when Omada Gateway adopt fails
- How to configure WAN Mode on the Omada Gateway via Omada Controller
- How to Configure Link Backup on Omada Gateway via Omada Controller
- How to configure Site-to-Site WireGuard VPN on Omada Controller
- How to configure Omada Gateway as a PPTP/L2TP VPN Client to enable the VPN Server as Proxy Gateway for backend clients
Firmware
A firmware update can resolve issues that the previous firmware version may have and improve its current performance.
To Upgrade
IMPORTANT: To prevent upgrade failures, please read the following before proceeding with the upgrade process
- Please upgrade firmware from the local TP-Link official website of the purchase location for your TP-Link device, otherwise it will be against the warranty. Please click here to change site if necessary.
- Please verify the hardware version of your device for the firmware version. Wrong firmware upgrade may damage your device and void the warranty. （Normally V1.x=V1）
How to find the hardware version on a TP-Link device - Do NOT turn off the power during the upgrade process, as it may cause permanent damage to the product.
- To avoid wireless disconnect issue during firmware upgrade process, it's recommended to upload firmware with wired connection unless there is no LAN/Ethernet port on your TP-Link device.
- It's recommended that users stop all Internet applications on the computer, or simply disconnect Internet line from the device before the upgrade.
- Use decompression software such as WinZIP or WinRAR to extract the file you download before the upgrade.
|
G36W-4G(EU)_V1_1.1.1 Builld 20240723 |
Download | |
|---|---|---|
| Published Date: 2024-08-23 | Language: English | File Size: 124.62 MB |
|
Bug Fixed: 1. Fixed the issue that URL filter does not take effect when browser enabled TLS 1.3 hybridized Kyber support. 2. Fixed the issue that ISP profile of LTE cannot be upgraded. 3. Fixed the issue that cannot access internet (IPv4) with line of ISP Globe. |
||
|
G36W-4G(EU)_V1_1.1.0 Build 20240523 |
Download | |
|---|---|---|
| Published Date: 2024-06-27 | Language: English | File Size: 124.62 MB |
|
This firmware is adapted to Omada Pro Controller 1.9 |
||
|
G36W-4G(EU)_V1_1.0.4 Build 20240329 |
Download | |
|---|---|---|
| Published Date: 2024-04-18 | Language: English | File Size: 117.46 MB |
|
This firmware is adapted to Omada Pro Controller 1.3.40. Enhancements: Notes: |
||
To Use Third Party Firmware In TP-Link Products
Some official firmware of TP-Link products can be replaced by the third party firmware such as DD-WRT. TP-Link is not obligated to provide any maintenance or support for it, and does not guarantee the performance and stability of third party firmware. Damage to the product as a result of using third party firmware will void the product's warranty.
Open Source Code For Programmers (GPL)
Please note: The products of TP-Link partly contain software code developed by third parties, including software code subject to the GNU General Public Licence (“GPL“), Version 1/Version 2/Version 3 or GNU Lesser General Public License ("LGPL"). You may use the respective software condition to following the GPL licence terms.
You can review, print and download the respective GPL licence terms here. You receive the GPL source codes of the respective software used in TP-Link products for direct download and further information, including a list of TP-Link software that contain GPL software code under GPL Code Center.
The respective programs are distributed WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the respective GNU General Public License for more details.
Apps
- Omada APP
TP-Link Omada lets you configure settings, monitor network status and manage clients, all from the convenience of a smart phone or tablet. Learn more about Compatible Devices.
Note: SDN switch/router is compatible with Omada App only in controller mode. To use Omada, please update your device's firmware to the latest version.