450Mbps Wireless N Access Point
- 450Mbps wireless transmission rate brings smooth wireless N experience
- Supports multiple operating modes: Access Point, Range Extender, Multi-SSID and Client modes
- Easily setup a WPA-PSK/WPA2-PSK encrypted secure connection at a push of the WPS button
- Up to 30 meters (100 feet) of flexible deployment with included Power over Ethernet Injector
What This Product Does
The TP-LINK Wireless N Access Point TL-WA901N is designed to establish or expand a scalable high-speed wireless N network or to connect an Ethernet-enabled device such as a game console, digital media adapter, printer, or network-attached storage device to a wireless network. The AP supports a host of different functions that makes your wireless networking experience more flexible than ever before. Now, you can enjoy a better Internet experience when downloading, gaming, video streaming or any other application that you may wish to use.
Wireless N Speed & Range
Adopting IEEE 802.11n advanced MIMO (Multi Input Multi Output) technology, it simultaneously works through three antennas with smart antenna technology to Tx and Rx to overcome the interference and signal degradation when traveling long distances or through physical barriers in a small office or a large apartment, resulting in an incredible improvement in the wireless performance, even in a steel-and-concrete building. Above all, you could easily pick up the wireless network during long-distance connection where legacy 11g products may not!
Multiple Operating Modes
- Easy to Build WLAN
Supports Client, Multi-SSID, Range Extender, and AP operation modes to enable various wireless applications to give users a more dynamic and comprehensive experience when using your AP. Multiple operating mode also helps you easily build wireless network for hard-to-wire locations or eliminating wireless dead zone.
Passive PoE Supported
-More Flexible Deployment
The TL-WA901N is able to be powered using an Ethernet cable to simultaneously send data and electricity to wherever your AP may be located even up to 100 feet away. This feature multiplies your options allowing you to place the AP in a position that is most convenient to get the best signal possible, such as on the wall or on the ceiling of your office.
|CARACTERÍSTICAS DE HARDWARE|
|Interface||1× 10/100M Ethernet Port(RJ45)Support Passive PoE|
|Botón||Power On/Oﬀ Button, Reset Button, WPS Button|
|Fuente de Alimentación Externa||9VDC / 0.85A|
|Estándares Inalámbricos||IEEE 802.11n, IEEE 802.11g, IEEE 802.11b|
|Dimensiones (W X D X H)||7.7 × 5.3 × 1.4 in (195 × 134 × 36 mm )|
|Tipo de Antena||3 Fixed Omni-Directional Antennas|
|Tasa de Señal||450 Mbps at 2.4 GHz|
|Sensibilidad de Recepción||11g 54M: -76dBm11n 20Mbps: -73dBm11n 40Mbps: -70dBm|
|Potencia de Transmision||CE: <20dBm; FCC: <30dBm|
|Modos Inalámbricos||Access Point, Range Extender, Client, Multi-SSID|
|Funciones Inalámbricas||Enable/Disable Wireless Radio, WDS Bridge, WMM,Wireless Statistics|
|Seguridad Inalámbrica||64/128-bit WEP, WPA/WPA2, WPA-PSK/WPA-PSK2encryptions|
|DHCP||Server, DHCP Client List|
|Calidad de Servicio||WMM|
|Funciones Avanzadas||Up to 30 meters PoE is supported|
|Certificacion||CE, FCC, RoHS|
|Contenidos del Paquete||Wireless N Access Point TL-WA901NPower AdapterPassive PoE Power InjectorRJ45 Ethernet CableQuick Installation Guide|
|Requisitos del Sistema||Microsoft Windows 98SE/NT/2000/XP/Vista™/7/8/8.1/10, MAC OS,NetWare, UNIX or LinuxInternet Explorer 11, Firefox 12.0, Chrome 20.0, Safari 4.0, or otherJava-enabled browserCable or DSL ModemSubscription with an Internet Service Provider (for Internet access)|
|Ambiente||Operating Temperature: 0°C~40°C (32°F~104°F)Storage Temperature: -40°C~70°C (-40°F~158°F)Operating Humidity: 10%~90% non-condensingStorage Humidity: 5%~90% non-condensing|
|Protocolo de Soporte||IPv4, IPv6|
*Maximum wireless signal rates are the physical rates derived from IEEE Standard 802.11 specifications. Actual wireless data throughput and wireless coverage are not guaranteed and will vary as a result of 1) environmental factors, including building materials, physical objects, and obstacles, 2) network conditions, including local interference, volume and density of traffic, product location, network complexity, and network overhead, and 3) client limitations, including rated performance, location, connection, quality, and client condition.