Descarga para T2600G-18TS V2

Elija la versión de hardware:

>¿Cómo encontrar la versión de hardware en un dispositivo TP-Link?

IMPORTANTE : la disponibilidad del modelo y la versión de hardware varía según la región. Consulte su sitio web regional de TP-Link para determinar la disponibilidad del producto.

Product Overview

T2600G-18TS(UN)_V2_Datasheet

Manual

JetStream 16-Port Gigabit L2 Managed Switch with 2 SFP Slots
T2600G-18TS

MIBs Archivos

T2600G-18TS(UN)_V2_MIB_20180710

Descargar

Fecha de Publicación: 2019-05-13

Idioma: Inglés

Tamaño del archivo: 206.12 KB

Sistema operativo: Win2000/XP/2003/Vista/7/8/8.1/10/Mac/Linux

802.1X Cliente

TP-LINK_802.1X_Client_Software

Descargar

Fecha de Publicación: 2017-09-05

Idioma: Inglés

Tamaño del archivo: 5.5MB

Sistema operativo: Win2000/XP/2003/Vista/7/8/8.1/10

Driver

TP-LINK_USB_Console_Driver

Descargar

Fecha de Publicación: 2019-03-13

Idioma: Inglés

Tamaño del archivo: 3.10 MB

Sistema operativo: Win2000/XP/2003/Vista/7/8/8.1/10

Notes:

For TP-LINK switches with USB Console port

FAQs

Troubleshooting Instruction of TP-Link switch’s SFP port 07-23-202485283
The difference between the Voice VLAN feature and Auto VOIP feature 07-23-202479471
How to enter the BootUtil Menu to factory reset the switch with the console cable 03-22-2024129227
How to access TP-Link JetStream Managed Switch via the Console port 06-29-2022362149
How to build up a multi-nets network via Multi-Nets NAT feature on TP-Link router with L2+/L3 switches 06-28-2022323517
How to configure the DHCP Relay in TP-Link Switch 06-27-2022255334
How to configure the default gateway of the smart and L2 managed switches using the new GUI 06-27-2022162530
How to configure Voice VLAN to optimize the transmission of voice traffic on TP-Link Smart and Managed Switches using the new GUI 06-27-2022110396
How to configure 802.1Q VLAN for LAG ports on Smart and Managed switches using the new GUI 06-27-202289609
How to manage the switch with Mac via Micro USB cable 06-24-202248904
How to achieve AAA Authentication through TACACS + server on the switch 11-22-202159005
How to configure OpenSSH 7.0(and above) to login smart and managed switches? 04-17-2018132917
The nodes that TP-Link T1600/T2600 series switch use to display the CPU and Memory utilization through SNMP 12-26-201668416

T2600G-18TS(UN)_V2_20200304

Descargar

Fecha de Publicación: 2020-10-21

Idioma: Inglés

Tamaño del archivo: 9.26 MB

New Features/Enhancements:
1. Add the feature that needs to change the password when login for the first time.
2. Add the feature that can choose not to change the IP address when resetting the switch.
3. Add "service reset-disable" for removing reset option from Bootutil.
4. Add built-in Telnet client which allows the switch can telnet other devices.
5. Allow disabling HTTP and HTTPS for access types at the same time.
6. Optimize the password character set to support more special characters.
7. Optimize the BPDU Filter feature to make ports not send out BPDU packets when BPDU Filter is enabled.
8. Optimized the CLI display of MVR configurations.
9. Support to display MVR members of inactive and active groups.
10. Support to view/clear mac-address table on port/VLAN.
11. Support to fill in file name with folder path when using SNMP or CLI to upgrade firmware or restore config file through TFTP.
Notes:
1. For T2600G-18TS(UN) V2.0
2. Your device's configuration will not be lost after upgrading, which means you don't need to configure your device again after upgrading.
3. After upgrading, it cannot downgrade to the old version firmware because of the encryption rule has changed.

T2600G-18TS(UN)_V2_190516

Descargar

Fecha de Publicación: 2019-07-17

Idioma: Inglés

Tamaño del archivo: 9.06 MB

Modifications and Bug Fixes:
1. Enhanced the MVR function.
2. Support TLS 1.2.
3. Fix the bug that the IP in circuit-ID is wrong when the VLANs which the port belong to does not set up interface and PPPoE IP insertion is IP mode.
4. Fix the bug that NTP server will be changed when set up only one NTP server and fail to get the time.
5. Fix the bug that cannot set up auto mode for fiber ports which in portchannel.
6. Fix the bug that access control entries will not take effect when two or more entries are added for port binding.

Notes:
1. For T2600G-18TS(UN) V2.0.
2. If your device's Hardware Version is 1.0, after upgrading to this firmware, the old configuration will be lost.

T2600G-18TS(UN)_V2_180710

Descargar

Fecha de Publicación: 2018-08-01

Idioma: Inglés

Tamaño del archivo: 7.82 MB

Modifications and Bug Fixes: First firmware released.
Notes: For T2600G-18TS(UN) V2.0