Descarga para T1600G-52PS V4

Elija la versión de hardware:

>¿Cómo encontrar la versión de hardware en un dispositivo TP-Link?

IMPORTANTE : la disponibilidad del modelo y la versión de hardware varía según la región. Consulte su sitio web regional de TP-Link para determinar la disponibilidad del producto.

Product Overview

Manual

JetStream 48-Port Gigabit Smart PoE+ Switch with 4 SFP Slots
T1600G-52PS

MIBs Archivos

T1600G-52PS(UN)_v4_MIB_20190321

Descargar

Fecha de Publicación: 2019-09-25

Idioma: Inglés

Tamaño del archivo: 200.17 KB

Sistema operativo: Win2000/XP/2003/Vista/7/8/8.1/10/Mac/Linux

T1600G-52PS(UN)_V4_MIB_20180716

Descargar

Fecha de Publicación: 2019-05-13

Idioma: Inglés

Tamaño del archivo: 206.12 KB

Sistema operativo: Win2000/XP/2003/Vista/7/8/8.1/10/Mac/Linux

802.1X Cliente

TP-LINK_802.1X_Client_Software

Descargar

Fecha de Publicación: 2017-09-05

Idioma: Inglés

Tamaño del archivo: 5.5MB

Sistema operativo: Win2000/XP/2003/Vista/7/8/8.1/10

FAQs

How to configure the default gateway of the smart and managed switches using the old GUI 08-09-2024252690
The difference between the Voice VLAN feature and Auto VOIP feature 07-23-202477876
What should I do if I cannot access the web management page of my TP-Link switch? 07-23-2024340173
Do you still have any doubt about the effect of QoS on the Switch of TP-Link? 07-23-202487632
How to block an illegal client with Certain IP address from getting access to the network using TP-Link Managed Switches 07-01-202477399
How to build up a multi-nets network via Multi-Nets NAT feature on TP-Link router with L2+/L3 switches 06-28-2022319163
How to change the IP address of the smart and managed switches using the old GUI and CLI 06-28-2022320854
How to configure LACP on our Smart/ Managed Switch 06-28-2022231083
How to configure MAC ACL on Smart/Managed switch 06-28-202283232
How to choose PoE switch 06-28-2022108089
How to configure the DHCP Relay in TP-Link Switch 06-27-2022252735
How to configure Voice VLAN to optimize the transmission of voice traffic on TP-Link Smart and Managed Switches using the new GUI 06-27-2022108862
How to configure 802.1Q VLAN for LAG ports on Smart and Managed switches using the new GUI 06-27-202288361
How to achieve AAA Authentication through TACACS + server on the switch 11-22-202157258
How to configure OpenSSH 7.0(and above) to login smart and managed switches? 04-17-2018131202
The nodes that TP-Link T1600/T2600 series switch use to display the CPU and Memory utilization through SNMP 12-26-201667301

T1600G-52PS(UN)_V4_20200918.

Descargar

Fecha de Publicación: 2021-05-21

Idioma: Inglés

Tamaño del archivo: 8.70 MB

New Features/Enhancements:
Add the feature that supports to be managed by the Omada SDN Controller. In the controller mode, some advanced functions will be limited. You can refer to the FAQ2936 to see the functions that can be configured on the controller.

Notes:
1. For T1600G-52PS(UN) V4.0
2. Your device's configuration will not be lost after upgrading, which means you don't need to configure your device again after upgrading.
3. If you choose to manage the switch with controller mode, the settings you configured in standalone mode will lose after the switch is adopted by the controller.

T1600G-52PS(UN)_V4_20200110

Descargar

Fecha de Publicación: 2020-03-26

Idioma: Inglés

Tamaño del archivo: 9.52 MB

New Features/Enhancements:
1. Add the feature that needs to change the password when login for the first time.
2. Add the feature that can choose not to change the IP address when resetting the switch.
3. Add "service reset-disable" for removing reset option from Bootutil.
4. Add built-in Telnet client which allows the switch can telnet other devices.
5. Allow disabling HTTP and HTTPS for access types at the same time.
6. Optimize the password character set to support more special characters.
7. Optimize the BPDU Filter feature to make ports not send out BPDU packets when BPDU Filter is enabled.
8. Optimized the CLI display of MVR configurations.
9. Support to display MVR members of inactive and active groups.
10. Support to view/clear mac-address table on port/VLAN.
11. Support to fill in file name with folder path when using SNMP or CLI to upgrade firmware or restore config file through TFTP.
Notes:
1. For T1600G-52PS(UN) V4.0
2. Your device's configuration will not be lost after upgrading, which means you don't need to configure your device again after upgrading.

3. After upgrading, it cannot downgrade to the old version firmware because of the encryption rule has changed.

T1600G-52PS(UN)_V4_20190516

Descargar

Fecha de Publicación: 2019-07-04

Idioma: Inglés

Tamaño del archivo: 9.75 MB

Modifications and Bug Fixes:
1. Update HTTPS to support TLS1.2.
2. Fix the bug that the settings of SNMP Community/Notification/Trap will lose after rebooting the switch when turning off the global switch of SNMP function.
3.Fix the bug that the IP in circuit-ID is wrong when the VLANs which the port belong to does not set up the interface and PPPoE IP insertion is IP mode.
4. Fix the bug that NTP server will be changed when setting up only one NTP server and fail to get the time.
5. Fix the bug that cannot set up auto mode for fibre ports which in the port channel.
6. Fix the bug that access control entries will not take effect when two or more entries are added for port binding.

Notes:
For T1600G-52PS(UN) V4.0.