Descarga para T1600G-18TS V2

Elija la versión de hardware:

>¿Cómo encontrar la versión de hardware en un dispositivo TP-Link?

IMPORTANTE : la disponibilidad del modelo y la versión de hardware varía según la región. Consulte su sitio web regional de TP-Link para determinar la disponibilidad del producto.

Product Overview

T1600G-18TS(UN)_V2_Datasheet

Manual

MIBs Archivos

T1600G-18TS(UN)_V2_MIB_20180622

Descargar

Fecha de Publicación: 2019-05-13

Idioma: Inglés

Tamaño del archivo: 208.30 KB

Sistema operativo: Win2000/XP/2003/Vista/7/8/8.1/10/Mac/Linux

802.1X Cliente

TP-LINK_802.1X_Client_Software

Descargar

Fecha de Publicación: 2017-09-05

Idioma: Inglés

Tamaño del archivo: 5.5MB

Sistema operativo: Win2000/XP/2003/Vista/7/8/8.1/10

FAQs

Troubleshooting Instruction of TP-Link switch’s SFP port 07-23-202483533
The difference between the Voice VLAN feature and Auto VOIP feature 07-23-202477876
How to configure DHCP VLAN Relay on L2 Managed switches using the new GUI 07-23-2024143186
What should I do if I cannot access the web management page of my TP-Link switch? 07-23-2024340173
¿Cómo configurar Obtener tiempo del servidor NTP en el Switch inteligente - administrable de TP-Link? 07-05-2022225100
How to build up a multi-nets network via Multi-Nets NAT feature on TP-Link router with L2+/L3 switches 06-28-2022319163
How to change the IP address of the smart and L2 managed switches using the new GUI and CLI 06-27-2022178461
How to configure the default gateway of the smart and L2 managed switches using the new GUI 06-27-2022158862
How to configure 802.1Q VLAN on Smart and Managed switches using the new GUI 06-27-2022158024
How to configure Voice VLAN to optimize the transmission of voice traffic on TP-Link Smart and Managed Switches using the new GUI 06-27-2022108862
How to configure backup image when upgrading a firmware on TP-Link Smart/Managed Switches using the new GUI 06-27-202257845
How to configure Access Control to block users' access to the switch using the new GUI 06-27-202269250
How to configure MSTP on L2 Managed switches using the new GUI 06-27-202261574
How to configure DHCP Interface Relay on L2 Managed switches using the new GUI 06-27-202279881
How to configure IGMP Snooping for IPTV network on L2 Managed switches using the new GUI 06-27-2022170827
How to configure Port Isolation on Smart and L2 Managed Switches using the new GUI 06-27-202260559
How to configure 802.1Q VLAN for LAG ports on Smart and Managed switches using the new GUI 06-27-202288361
How to achieve AAA Authentication through TACACS + server on the switch 11-22-202157258
Why are some functions lost after I log in to the switch? 07-20-202148125
How to configure MAC ACL on Smart and L2 Managed switches using the new GUI 06-06-201858843
How to configure OpenSSH 7.0(and above) to login smart and managed switches? 04-17-2018131202

T1600G-18TS(UN)_V2_20200304

Descargar

Fecha de Publicación: 2021-01-21

Idioma: Inglés

Tamaño del archivo: 9.25 MB

New Features/Enhancements:
1. Add the feature that needs to change the password when login for the first time.
2. Add the feature that can choose not to change the IP address when resetting the switch.
3. Add "service reset-disable" for removing reset option from Bootutil.
4. Add built-in Telnet client which allows the switch can telnet other devices.
5. Allow disabling HTTP and HTTPS for access types at the same time.
6. Optimize the password character set to support more special characters.
7. Optimize the BPDU Filter feature to make ports not send out BPDU packets when BPDU Filter is enabled.
8. Optimized the CLI display of MVR configurations.
9. Support to display MVR members of inactive and active groups.
10. Support to view/clear mac-address table on port/VLAN.
11. Support to fill in file name with folder path when using SNMP or CLI to upgrade firmware or restore config file through TFTP.
Notes:
1. For T1600G-18TS(UN) V2.0
2. Your device's configuration will not be lost after upgrading, which means you don't need to configure your device again after upgrading.
3. After upgrading, it cannot downgrade to the old version firmware because of the encryption rule has changed.

T1600G-18TS(UN)_V2_20190516

Descargar

Fecha de Publicación: 2019-07-04

Idioma: Inglés

Tamaño del archivo: 9.48 MB

Modifications and Bug Fixes:
1. Fix the bug that the existing topology will reconverge when STP is enabled on a port which is not link-up.
2. Fix the bug that the status change of LACP port which is not enabled STP will cause the reconverge of the topology.

Notes:
1. For T1600G-18TS(UN) V2.0.
2. If your device's Hardware Version is 1.0, after upgrading to this firmware, the old configuration will be lost.

T1600G-18TS(UN)_V2_190408

Descargar

Fecha de Publicación: 2019-05-29

Idioma: Inglés

Tamaño del archivo: 8.95 MB

Modifications and Bug Fixes:
1. Support TLS 1.2.
2. Fix the bug that NTP server will be changed when set up only one NTP server and fail to get the time.
3. Fix the bug that cannot set up auto mode for fiber ports which in portchannel.
4. Fix the bug that access control entries will not take effect when two or more entries are added for port binding.

Notes:
1. For T1600G-18TS(UN) V2.0.
2. If your device's Hardware Version is 1.0, after upgrading to this firmware, the old configuration will be lost.