Descarga para T1500G-10PS V2

Elija la versión de hardware:

>¿Cómo encontrar la versión de hardware en un dispositivo TP-Link?

IMPORTANTE : la disponibilidad del modelo y la versión de hardware varía según la región. Consulte su sitio web regional de TP-Link para determinar la disponibilidad del producto.

Product Overview

T1500G-10PS(TL-SG2210P)_V2_Datasheet

Manual

JetStream 8-Port Gigabit Smart PoE Switch with 2 SFP Slots
T1500G-10PS

MIBs Archivos

T1500G-10PS(UN)_V2_MIB_20180330

Descargar

Fecha de Publicación: 2019-05-13

Idioma: Inglés

Tamaño del archivo: 205.66 KB

Sistema operativo: Win2000/XP/2003/Vista/7/8/8.1/10/Mac/Linux

802.1X Cliente

TP-LINK_802.1X_Client_Software

Descargar

Fecha de Publicación: 2017-09-05

Idioma: Inglés

Tamaño del archivo: 5.5MB

Sistema operativo: Win2000/XP/2003/Vista/7/8/8.1/10

FAQs

Why the firmware version does not change after upgrading in T Series switches? 08-09-202461345
How to configure IGMP Snooping for IPTV network using L2 switch 08-09-2024219832
How to configure the default gateway of the smart and managed switches using the old GUI 08-09-2024252690
How to build a Wireless Network for Chain Store using tp-link products 08-02-202463535
What is the function we can configure when the switch is managed by Omada SDN Controller? 07-23-202465966
Troubleshooting Instruction of TP-Link switch’s SFP port 07-23-202483533
The difference between the Voice VLAN feature and Auto VOIP feature 07-23-202477876
What should I do if I cannot access the web management page of my TP-Link switch? 07-23-2024340173
Do you still have any doubt about the effect of QoS on the Switch of TP-Link? 07-23-202487632
How to block an illegal client with Certain IP address from getting access to the network using TP-Link Managed Switches 07-01-202477400
What are the differences in features and application scenarios among various serial switches? 07-01-2024225625
¿Cómo configurar Obtener tiempo del servidor NTP en el Switch inteligente - administrable de TP-Link? 07-05-2022225100
How to Setup TP-Link AP’s Multi-SSID (VLAN) to Work with TP-Link Switch 06-29-2022560017
How to Configure Port Isolation Function on Our Layer 2 Manage switches through Web Browser 06-29-2022125146
How to Configure Port Mirror on TP-Link Smart Switches and L2 Managed Switches 06-29-202280602
How to configure 802.1q VLAN on Smart Switches 06-29-2022146000
How to configure RSTP on TP-Link switches using the old GUI 06-28-2022107728
How to change the IP address of the smart and managed switches using the old GUI and CLI 06-28-2022320854
How to configure LACP on our Smart/ Managed Switch 06-28-2022231083
How to configure MAC ACL on Smart/Managed switch 06-28-202283232
How to choose PoE switch 06-28-2022108089
How to change the IP address of the smart and L2 managed switches using the new GUI and CLI 06-27-2022178461
How to configure the default gateway of the smart and L2 managed switches using the new GUI 06-27-2022158862
How to configure 802.1Q VLAN on Smart and Managed switches using the new GUI 06-27-2022158024
How to configure Voice VLAN to optimize the transmission of voice traffic on TP-Link Smart and Managed Switches using the new GUI 06-27-2022108862
How to configure backup image when upgrading a firmware on TP-Link Smart/Managed Switches using the new GUI 06-27-202257845
How to configure Access Control to block users' access to the switch using the new GUI 06-27-202269250
How to configure STP/RSTP on L2 Managed switches using the new GUI 06-27-202278766
How to configure MSTP on L2 Managed switches using the new GUI 06-27-202261574
How to configure IGMP Snooping for IPTV network on L2 Managed switches using the new GUI 06-27-2022170828
How to configure Port Isolation on Smart and L2 Managed Switches using the new GUI 06-27-202260559
How to configure 802.1Q VLAN for LAG ports on Smart and Managed switches using the new GUI 06-27-202288361
Why are some functions lost after I log in to the switch? 07-20-202148125
How to configure MAC ACL on Smart and L2 Managed switches using the new GUI 06-06-201858843
How to configure OpenSSH 7.0(and above) to login smart and managed switches? 04-17-2018131202

T1500G-10PS(UN)_V2_20200805

Descargar

Fecha de Publicación: 2020-09-22

Idioma: Inglés

Tamaño del archivo: 8.31 MB

New Features/Enhancements:
Add the feature that supports to be managed by the Omada SDN Controller. In the controller mode, some advanced functions will be limited. You can refer to the FAQ2936 to see the functions that can be configured on the controller.

Notes:
1. For T1500G-10PS(UN) V2.0
2. Your device's configuration will not be lost after upgrading, which means you don't need to configure your device again after upgrading.
3. If you choose to manage the switch with controller mode, the settings you configured in standalone mode will lose after the switch is adopted by the controller.

T1500G-10PS(UN)-V2-20200109

Descargar

Fecha de Publicación: 2020-04-20

Idioma: Inglés

Tamaño del archivo: 9.15 MB

New Features/Enhancements:
1. Add the feature that needs to change the password when login for the first time.
2. Add the feature that can choose not to change the IP address when resetting the switch.
3. Add "service reset-disable" for removing reset option from Bootutil.
4. Add built-in Telnet client which allows the switch can telnet other devices.
5. Allow disabling HTTP and HTTPS for access types at the same time.
6. Optimize the password character set to support more special characters.
7. Optimize the BPDU Filter feature to make ports not send out BPDU packets when BPDU Filter is enabled.
8. Optimized the CLI display of MVR configurations.
9. Support to display MVR members of inactive and active groups.
10. Support to view/clear mac-address table on port/VLAN.
11. Support to fill in file name with folder path when using SNMP or CLI to upgrade firmware or restore config file through TFTP.
Notes:
1. For T1500G-10PS(UN) V2.0
2. Your device's configuration will not be lost after upgrading, which means you don't need to configure your device again after upgrading.

3. After upgrading, it cannot downgrade to the old version firmware because of the encryption rule has changed.

T1500G-10PS(UN)_v2_190509

Descargar

Fecha de Publicación: 2019-07-25

Idioma: Inglés

Tamaño del archivo: 8.84 MB

Modifications and Bug Fixes:
1. Enhanced the MVR function.
2. Support TLS 1.2.
3. Fix the bug that NTP server will be changed when set up only one NTP server and fail to get the time.
4. Fix the bug that cannot set up auto mode for fiber ports which in portchannel.
5. Fix the bug that access control entries will not take effect when two or more entries are added for port binding.

Notes:
1. For T1500G-10PS(UN) 2.0.
2. If your device's Hardware Version is 1.0, after upgrading to this firmware, the old configuration will be lost.