What to do if Archer TX20U Plus plug and play doesn’t work

Updated 07-16-2022 08:11:18 AM 30248
This Article Applies to: 

Archer TX20U Plus is plug-and-play.

It has a built-in driver, you can plug in and click to install the driver. If it does not work, you may refer this article to manually install the driver.

1.We strongly suggest plug Archer TX20U Plus to USB3.0 port on the PC.

You can tell the difference by the color of the physical port’s interior part: the black color indicates USB 2.0, the blue color indicates 3.0, and the green color indicates USB 3.1.

2.Please check if the built-in driver is installed successfully or not.

Go to Device Manager-Network adapters, you will see a device named “Realtek 8832AU” or “TP-Link wireless adapter” if the driver installed successfully.

If not, you will see a new device under Other device named “802.11ax” with a yellow “!”.

3.You may go to TP-Link website to download driver and manually install the driver.

NOTE: Re-start PC after you install the driver.

4.If above suggestions do not help, please contact TP-Link support with the following information:

·Detailed description of the unstable or the usage problem;

·Screenshots of the driver version;

·Model number of the motherboard;

·Specific windows version.

Is this faq useful?

Your feedback helps improve this site.