Download for SG2428LP
Vx.0=Vx.6/Vx.8 (eg:V1.0=V1.6/V1.8)
Vx.x0=Vx.x6/Vx.x8 (eg:V1.20=V1.26/V1.28)
Vx.30=Vx.32 (eg:V3.30=V3.32)
- Product Overview
Controller Software
The EAP Controller is used to manage multiple EAPs intensively.
|
Omada_SDN_Controller_v5.14.32.3_linux_x64.tar.gz |
Download | |
|---|---|---|
| Published Date: 2024-11-01 | Language: English | File Size: 241.05 MB |
Operating System: Ubuntu 16.04/18.04/20.04/22.04, Debian 8/9/10 |
||
|
Omada_SDN_Controller_v5.14.32.3_linux_x64.deb |
Download | |
|---|---|---|
| Published Date: 2024-11-01 | Language: English | File Size: 228.80 MB |
Operating System: Ubuntu 16.04/18.04/20.04/22.04, Debian 8/9/10 |
||
|
Omada_SDN_Controller_v5.14.32.3_Windows |
Download | |
|---|---|---|
| Published Date: 2024-11-01 | Language: English | File Size: 318.62 MB |
Operating System: Windows 7/8/10/11/Server |
||
Omada Discovery Utility
|
Omada Discovery Utility 5.2.1 |
Download | |
|---|---|---|
| Published Date: 2024-08-05 | Language: English | File Size: 40.51 MB |
Operating System: Windows/Mac OS/Linux |
||
|
Enhancements & Fixed Bugs: Optimized some functions and fixed bugs.
Note: 1. To run this software, you need to install JRE 8.0 on your PC first. 2. Double-click the software or run the command "java -jar **.jar" to run the software on MacOS (**.jar is the name of this software). 3. Omada Controller and Discover Utility cannot run on the same computer at the same time. |
||
MIBs Files
|
TP-Link_L2 Switch_MIB |
Download | |
|---|---|---|
| Published Date: 2024-02-29 | Language: English | File Size: 199.18 KB |
Operating System: Windows/Mac OS/Linux |
||
|
|
||
FAQs
- How to Configure Management VLAN on TP-Link Smart and Managed Switches Using the New GUI
- Troubleshooting multicast video issues on Omada switches
- How to configure Switch Port Mirroring on Omada Controller
- How to configure 802.1Q VLAN on Smart and Managed switches using the new GUI
- How to configure IGMP Snooping for IPTV network on L2 Managed switches using the new GUI
- Suggested Configurations for AVoIP protocols on Omada Switches
- How to configure Auto-VoIP on Omada Switches via Omada Controller
- How to Configure IGMP Snooping on Omada Switches for Hotel IPTV Scenarios
- Commonly Recommended ACL Configurations on Omada Switches
- How to Configure Management VLANs for Omada Switches and APs (for SOHO / Home Networking Scenario)
- How to configure Management VLANs for Omada Switches and APs (for Business scenario)
- How to configure 802.1X VLAN Assignment on Omada Controller
- How to configure AAA to assign different privileges for radius users to login on Omada Switch
- What's the difference between the Master Administrator, Administrator and Viewer accounts in the Omada Controller?
- How to use the Ping tool in Omada APP
- What should I do when the Omada Software Controller (V4) fails to discover the devices?
- How to Identify an Omada Switch Model and Type
- Getting started without an Omada Controller
- What should I do if my switch has no Internet access?
- How to setup Switch as DHCP server on Omada Controller
- How to configure DHCP Auto Install to let switch get configuration file and image from TFTP server
- How to build an 802.1X access authentication system using Switches on Omada Controller
- How to configure Optical Line Terminal (OLT) and Omada Switch with XM60A
- How to configure LAG (LACP) on Omada Switches via Omada Controller
- How To Fix VLAN Communication Issues Within Same VLAN on TP-Link Omada Switches
- Best Practices for Preventing Network Loops with Omada SDN Solutions
- How to configure a TP-Link Switch as DHCP Server in Standalone mode
- Using the Omada controller to configure multiple SSIDs with different VLANs on TP-Link Omada EAPs and Switches to work with a non-Omada gateway(Multi-Net NAT supported)
- What to do if The Omada Controller Will Not Start in a Windows System (Controller 4.1.5 or above)
- Using the Omada SDN Controller to Manage Omada Devices Across Multiple Locations Via a Controller (5.0 and Above)
- Using the Omada SDN Controller to Manage Omada Devices Across Multiple Locations Via a VPN Connection (Controller 5.0 and Above)
- What is 2FA and how to use it in Omada platform
- Typical CLI Configuration Examples for TP-Link JetStream Switch
- How to check and modify VLANs on a TP-Link JetStream switch via SNMP
- How to achieve AAA Authentication through TACACS + server on the switch
Firmware
A firmware update can resolve issues that the previous firmware version may have and improve its current performance.
To Upgrade
IMPORTANT: To prevent upgrade failures, please read the following before proceeding with the upgrade process
- Please upgrade firmware from the local TP-Link official website of the purchase location for your TP-Link device, otherwise it will be against the warranty. Please click here to change site if necessary.
- Please verify the hardware version of your device for the firmware version. Wrong firmware upgrade may damage your device and void the warranty. （Normally V1.x=V1）
How to find the hardware version on a TP-Link device - Do NOT turn off the power during the upgrade process, as it may cause permanent damage to the product.
- To avoid wireless disconnect issue during firmware upgrade process, it's recommended to upload firmware with wired connection unless there is no LAN/Ethernet port on your TP-Link device.
- It's recommended that users stop all Internet applications on the computer, or simply disconnect Internet line from the device before the upgrade.
- Use decompression software such as WinZIP or WinRAR to extract the file you download before the upgrade.
|
SG2428LP(UN)_V1_1.0.1 Build 20240202 |
Download | |
|---|---|---|
| Published Date: 2024-03-15 | Language: English | File Size: 10.26 MB |
|
Bug Fixed: Notes: |
||
|
SG2428LP(UN)_V1_1.0.0 Build 20240111 |
Download | |
|---|---|---|
| Published Date: 2024-02-02 | Language: English | File Size: 9.59 MB |
|
First Firmware Release. Notes: |
||
To Use Third Party Firmware In TP-Link Products
Some official firmware of TP-Link products can be replaced by the third party firmware such as DD-WRT. TP-Link is not obligated to provide any maintenance or support for it, and does not guarantee the performance and stability of third party firmware. Damage to the product as a result of using third party firmware will void the product's warranty.
Open Source Code For Programmers (GPL)
Please note: The products of TP-Link partly contain software code developed by third parties, including software code subject to the GNU General Public Licence (“GPL“), Version 1/Version 2/Version 3 or GNU Lesser General Public License ("LGPL"). You may use the respective software condition to following the GPL licence terms.
You can review, print and download the respective GPL licence terms here. You receive the GPL source codes of the respective software used in TP-Link products for direct download and further information, including a list of TP-Link software that contain GPL software code under GPL Code Center.
The respective programs are distributed WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the respective GNU General Public License for more details.
Apps
- Omada APP
TP-Link Omada lets you configure settings, monitor network status and manage clients, all from the convenience of a smart phone or tablet. Learn more about Compatible Devices.
Note: SDN switch/router is compatible with Omada App only in controller mode. To use Omada, please update your device's firmware to the latest version.
GPL Code
Emulators
Firmware Version |
Working Mode |
Language |
|
|---|---|---|---|
20240111(UN) |
- |
English |
Note:
1. This Emulator is a virtual web GUI where you can program your TP-Link product firmware. For details about an individual product’s features and specifications please use the search facility and go to the product page.
2. Please check the firmware version corresponds to the version shown on the Emulator interface. Each firmware version has its own GUI and functionality.
3. Please note that not all firmware versions are represented on the Emulator.