Завантажити для EAP225-Wall
Vx.0=Vx.6/Vx.8/Vx.9(eg:V1.0=V1.6/V1.8V1.9)
Vx.x0=Vx.x6/Vx.x8/Vx.x9 (eg:V1.20=V1.26/V1.28/1.29)
Vx.30=Vx.32/Vx.33 (eg:V3.30=V3.32/V3.33)
- Огляд продукту
Omada AC1200 настінна точка доступа Wi‑Fi з MU-MIMОController Software
The EAP Controller is used to manage multiple EAPs intensively.
|
Omada_SDN_Controller_v5.14.26.1_linux_x64.tar.gz |
Завантажити | |
|---|---|---|
| Дата публікації: 2024-07-10 | Мова: Багатомовний | Розмір файлу: 230.75 MB |
Операційна система: Ubuntu 16.04/18.04/20.04/22.04, Debian 8/9/10 |
||
|
Omada_SDN_Controller_v5.14.26.1_Windows |
Завантажити | |
|---|---|---|
| Дата публікації: 2024-07-10 | Мова: Багатомовний | Розмір файлу: 317.68 MB |
Операційна система: Windows 7/8/10/11/Server |
||
|
Omada_SDN_Controller_v5.14.20.9_Windows |
Завантажити | |
|---|---|---|
| Дата публікації: 2024-05-27 | Мова: Багатомовний | Розмір файлу: 317.48 MB |
Операційна система: Windows 7/8/10/11/Server |
||
|
Omada_SDN_Controller_v5.13.30.8_linux_x64.deb |
Завантажити | |
|---|---|---|
| Дата публікації: 2024-02-27 | Мова: Багатомовний | Розмір файлу: 189.79 MB |
Операційна система: Ubuntu 16.04/18.04/20.04/22.04, Debian 8/9/10 |
||
|
As this version optimizes the WAN/LAN port configuration of Omada Gateway, it will cause some WAN ports to be enabled by default and cannot be disabled. This may result in changes to the load balance configuration, you can make the changes manually. |
||
|
Omada_SDN_Controller_v5.13.30.8_linux_x64.tar.gz |
Завантажити | |
|---|---|---|
| Дата публікації: 2024-02-27 | Мова: Багатомовний | Розмір файлу: 202.04 MB |
Операційна система: Ubuntu 16.04/18.04/20.04/22.04, Debian 8/9/10 |
||
|
As this version optimizes the WAN/LAN port configuration of Omada Gateway, it will cause some WAN ports to be enabled by default and cannot be disabled. This may result in changes to the load balance configuration, you can make the changes manually. |
||
|
Omada_SDN_Controller_v5.13.30.8_Windows |
Завантажити | |
|---|---|---|
| Дата публікації: 2024-02-05 | Мова: Багатомовний | Розмір файлу: 283.05 MB |
Операційна система: Windows 7/8/10/11/Server |
||
|
As this version optimizes the WAN/LAN port configuration of Omada Gateway, it will cause some WAN ports to be enabled by default and cannot be disabled. This may result in changes to the load balance configuration, you can make the changes manually. |
||
|
Omada_SDN_Controller_v5.12.7_Linux_x64.deb |
Завантажити | |
|---|---|---|
| Дата публікації: 2023-09-20 | Мова: Багатомовний | Розмір файлу: 177.25 MB |
Операційна система: Ubuntu 16.04/18.04/20.04, Debian 8/9/10 |
||
|
Omada_SDN_Controller_v5.12.7_linux_x64.tar.gz |
Завантажити | |
|---|---|---|
| Дата публікації: 2023-09-20 | Мова: Багатомовний | Розмір файлу: 192.17 MB |
Операційна система: Ubuntu 16.04/18.04/20.04, Debian 8/9/10, CentOS 6/7 |
||
|
Omada_SDN_Controller_v5.12.7_Windows |
Завантажити | |
|---|---|---|
| Дата публікації: 2023-09-20 | Мова: Багатомовний | Розмір файлу: 273.17 MB |
Операційна система: Windows 7/8/10/11/Server |
||
|
Omada_Controller_V3.2.1_linux_x64.tar |
Завантажити | |
|---|---|---|
| Дата публікації: 2019-07-26 | Мова: English | Розмір файлу: 123.15MB |
Операційна система: Ubuntu 14.04/16.04/17.04/18.04, CentOS 6.x/7.x and Fedora 20 or above, Debian 9.8. |
||
Omada Discovery Utility
|
Omada Discovery Utility 5.2.1 |
Завантажити | |
|---|---|---|
| Дата публікації: 2024-08-05 | Мова: English | Розмір файлу: 40.51 MB |
Операційна система: Windows/Mac OS/Linux |
||
|
Enhancements & Fixed Bugs: Optimized some functions and fixed bugs.
Note: 1. To run this software, you need to install JRE 8.0 on your PC first. 2. Double-click the software or run the command "java -jar **.jar" to run the software on MacOS (**.jar is the name of this software). 3. Omada Controller and Discover Utility cannot run on the same computer at the same time. |
||
|
Omada Discovery Utility 5.2.0 |
Завантажити | |
|---|---|---|
| Дата публікації: 2024-05-06 | Мова: English | Розмір файлу: 40.04 MB |
Операційна система: Windows/Mac OS/Linux |
||
|
New Feature/Enhancement: 1. Adapt to Omada SDN Controller v5.14.20. 2. Added support for Easy Managed Switch and OLT device identification and inform url. |
||
|
Omada Discovery Utility 5.1.1 |
Завантажити | |
|---|---|---|
| Дата публікації: 2023-12-26 | Мова: English | Розмір файлу: 40.06 MB |
Операційна система: Windows/Mac OS/Linux |
||
|
New Feature/Enhancement: Note: |
||
|
Omada Discovery Utility_v2.0.0_Mac |
Завантажити | |
|---|---|---|
| Дата публікації: 2018-07-24 | Мова: English | Розмір файлу: 84.16 MB |
Операційна система: Mac OS X 10.7/10.8/10.9/10.10/10.11 |
||
|
New Feature/Enhancement: |
||
|
EAP Discovery_V1.0.3_Windows |
Завантажити | |
|---|---|---|
| Дата публікації: 2018-01-05 | Мова: English | Розмір файлу: 3.39MB |
Операційна система: WinXP/Vista/7/8/8.1/10/Server2008/Server2012 |
||
|
|
||
Відео з налаштування
-
How to Install the Wall Plate Access Point with Mounting Bracket (EAP615-Wall for demonstration)
This video will show you how to install your Wall Plate Access Point with Mounting Bracket, using EAP615-Wall for demonstration.
More Fold -
How to Set Up the Whole Network of Gateway, Switches, and EAPs Using Omada SDN Controller
This video will demonstration how to do a full configuration with TP-Link Omada products including gateway, switches and EAPs. As an example, we are going to build the wired and wireless networks from scratch at our TP-Link Office. The setup consists of 7 steps: Step 1. Log in to the Controller Step 2. Adopt Devices Step 3. View Dashboard and Menus Step 4. Set up WAN Step 5. Set up LAN and VLANs Step 6. Set up Wi-Fi Step 7. Set up ACL
More Fold -
How to Install and Set Up Omada Software Controller
This video will show you how to install and set up the Omada Software Controller, using the Windows version for demonstration.
More Fold -
How to Adopt Omada Devices via Omada Controller
This video will show you how to adopt Omada devices and configure a gateway network via the Omada SDN Controller (Omada Software Controller is used as an example).
More Fold -
How to add devices with Zero-Touch Provisioning (ZTP) via Could-Based Controller
This video will show you How to add devices with Zero-Touch Provisioning (ZTP) via Could-Based Controller.
More Fold -
How to Monitor and Manage Devices via Omada SDN Controller
This video will show you how to monitor and manage devices via Omada SDN Controller.
More Fold -
How to Configure Schedules to Automate Network Control via Omada SDN Controller
This video shows how to configure WLAN Schedule, Port Schedule (PoE Schedule, Port Schedule), Upgrade Schedule, and Reboot Schedule to help you easily manage your network using the Omada Software Controller for demonstration.
More Fold -
How to Monitor and Manage Clients via Omada SDN Controller
This video will show you how to monitor and manage clients via Omada SDN Controller.
More Fold -
How to Check the Clients Signal Strength and Estimate the Actual Speed
This video will show you how to check the client signal strength and estimate actual network speeds.
More Fold -
How to Create User Accounts on Omada SDN Controller
This video shows how to create custom roles, local user accounts and cloud user accounts of different levels on the Omada SDN Controller.
More Fold -
How to Set Wireless SSID for Different Users via Omada SDN Controller
This video will show you how to set wireless SSIDs for different users via the Omada SDN Controller.
More Fold -
How to Configure No Authentication Portal via Omada SDN Controller
This video will show you how to configure No Authentication Portal via the Omada SDN Controller.
More Fold -
How to Configure Voucher Portal for Different Privilege Users via Omada SDN Controller
This video will show you how to configure the voucher portal for users with different privileges via the Omada Software Controller.
More Fold -
How to Use Heat Maps to Deploy Your Network via the Omada SDN Controller
This video will show you how to use heat maps to deploy your network via the Omada SDN Controller.
More Fold -
How to Configure Fast Roaming via the Omada SDN Controller
This video will show you how to configure Fast Roaming via the Omada SDN Controller.
More Fold -
How to Build an Omada Mesh Network via the Omada SDN Controller
This video will show you how to build an omada mesh network via the Omada SDN Controller.
More Fold -
How to Configure Bandwidth Control via Omada SDN Controller
This video will show you how to configure bandwidth control via Omada SDN Controller.
More Fold -
How to manage TP-Link EAPs centrally via the Software Controller
This video demonstrates how to manage TP-Link EAPs centrally via the Software Controller. The setup consists of three steps:
• Install the Software
• Configure Discovery Utility (If your EAPs and the Controller Host are on different subnets)
• Configure Software Controller
THIS VIDEO APPLIES TO:
• All TP-Link EAP models (except EAP120 and EAP220)
• Omada Software Controller
• Mass EAPs (usually more than three)
More Fold -
How to set up a TP Link EAP via your mobile phone
This video demonstrates how to set up a TP-Link EAP via your mobile phone. The setup consists of four steps:
• Connect the EAP to the network
• Download the Omada APP
• Connect to the EAP's wireless network
• Set up the EAP using the Omada APP
THIS VIDEO APPLIES TO:
• All TP-Link EAP models. (except EAP120 and EAP220)
• A small number (1-3) of EAPs.
More Fold -
How to manage TP-Link EAPs centrally from a remote place via a web browser
You can manage TP-Link EAPs at any time from anywhere with the Cloud Access function of our Omada Controller Software. This video introduces both the application scenario and concrete steps you can follow. Don't hesitate to give it a try.
THIS VIDEO APPLIES TO:
• All TP-Link EAP models (except EAP120 and EAP220)
• Omada Controller Software (version 3.0.2 or above)
• Mass EAPs (usually more than three)
More Fold -
A Quick Overview of EAP Management Methods
This video introduces how to choose the optimum method to manage TP-Link EAPs in your scenario.
Here are 3 most common scenarios and their corresponding methods:
• Manage 1 or 2 EAPs locally
• Manage 3 or more EAPs locally
• Manage 3 or more EAPs remotely
When choosing the method, consider the following questions:
1. Standalone Mode or Controller Mode?
2. In Controller mode, what kind of controller will you use, an OC200 or a PC with Omada Software Controller?
3. What kind of user interface will you use, a web browser or the Omada app?
More Fold -
How to Set up a TP-Link EAP via Web browser
This video will demonstrate how to set up a TP-Link EAP via a web browser. The setup consists of three steps:
1. Connect the EAP to the network
2. Log into the EAP (via a wired/wireless connection)
3. Change the default SSID
This video is suitable for users with a small number (1-3) of EAPs .
More Fold
FAQs
- Instructions for SSID security settings on Omada Controller
- How to configure MAC-Based Authentication on Omada Controller
- How to configure Fast Roaming on Omada Controller
- How to configure SSID VLAN on Omada AP with Third-Party Gateway
- Should I keep the Omada Controller running after configuration?
- Getting started with the standalone EAP
- What can I do If Omada App can’t find my AP
- How to get sarted with Standalone Access Points without Omada Controller
- How to configure ACL on Omada AP via Omada Controller
- How to configure abnormal on Omada Pro Controller
- Understanding and implementing Minimum RSSI
- Configure rogue AP detection on EAP/Omada Controller
- How to Change the Default Ports for EAP Controller
- How to configure guest network on Omada Controller
- Typical SSH commands for Omada AP troubleshooting
- Troubleshooting: AP goes offline abnormally
- How to configure 802.11r to speed up the roaming process
- How to configure Multicast Filtering on Omada Controller
- How to choose EAP products
- How to build a Factory Network using TP-Link products
- How to build a Network for Restaurant & Cafe using tp-link products
- How to build a Campus Network using TP-LINK products
- How to build a Wireless Network for Chain Store using tp-link products
- How to build a Wireless Network for Dormitory using tp-link products
- How to build a Wireless Network for School Canteen using tp-link products
- How to build a Wireless Network for Shopping Mall using tp-link products
- Troubleshooting guide of roaming
- Troubleshooting guide of common wireless issues
- What's the difference between Master Administrator, Administrator and Viewer account in Omada Controller?
- How to use the Ping tool in Omada APP
- How to downgrade firmware of EAP if it is abnormal after the update
- Overview of Omada EAP Power Supply
- What should I do when the Omada Software Controller (V4) fails to discover the devices?
- Common questions about TP-Link EAP device when it’s used in home network
- Frequently asked questions of Omada SDN solution related to upgrading and management
- What should I do when the Omada Software Controller (V3 or below) fails to discover the EAP?
- Troubleshooting of wireless issues for Omada EAP products
- How to view detailed client information of an EAP
- What can I do if I fail to log in to the EAP via the domain name?
- How do I upgrade the firmware of my EAP device via web browser?
- What is TP-Link EAP/CAP MU-MIMO?
- What is TP-Link EAP Beamforming?
- What is TP-Link EAP/CAP Airtime Fairness?
- Q&A for TP-Link Omada App
- Getting started without an Omada Controller
- How to configure Management VLANs for Omada Switches and APs (for SOHO scenario)
- How to configure Management VLANs for Omada Switches and APs (for Business scenario)
- Basic introduction to AP Mesh and Fast Roaming
- Why my clients don't roam or connect to the nearest AP
- Do I need to keep Omada Controller running when using portal authentication?
- What Is the difference between Login Account, Cloud Account, Device Account and User Account in Omada Controller?
- What should I do if I got a certificate error?
- Часті питання про точки доступу серії EAP
- Troubleshooting for Wireless Client Cannot Access the Internet
- How to Configure SSID & Client Rate Limit on Omada Controller
- Unable to connect to EAP WiFi
- Як налаштувати мережу на базі точок доступу серії EAP і EAP Software Controller, для середніх і великих об'єктів.
- How to optimize wireless performance of EAP products
- How do I find the firmware version of my EAP device?
- Announcement on Discontinuation of Facebook Wi-Fi
- API and Code Sample for RADIUS Server with External Web Portal (Omada Controller 4.1.5 or above)
- Using Omada controller to configure multiple SSIDs with different VLANs on TP-Link Omada EAPs and Switches to work with a non-Omada gateway(Multi-Net NAT supported)
- API and Code Sample for External Portal Server (Omada Controller 4.1.5 to 4.4.6)
- API and Code Sample for External Portal Server (Omada Controller 2.6.0 to 3.2.17)
- API and Code Sample for RADIUS Server with External Web Portal (Omada Controller 3.0.5 or below)
- What should I do if I cannot start the Omada Controller in windows system (Controller 4.1.5 or above)
- How to Manage Omada Devices at Different Sites Using Omada SDN Controller via Port Forwarding (Controller 5.0 or Above)
- How to Manage Omada Devices at Different Sites Using Omada SDN Controller via VPN (Controller 5.0 or Above)
- How to set Access Control to create guest SSID on Omada Controller/EAP
- What is 2FA and how to use it in Omada platform
- How to Configure Portal Authentication on Omada Controller
- How to configure Management VLAN in Standalone mode for EAP
- How to configure MAC filtering for EAP in Controller mode
- Configuration Guide on EAP-TLS authentication for WPA-Enterprise (with FreeRADIUS)
- How to Configure Voucher Authentication on Omada Controller
- How to deploy EAP controller on a private cloud (AWS EC2)
- How to set up different SSIDs and Passwords for each EAP through EAP Controller
- How to manage EAPs in different subnets using Omada controller (via EAP Discover Utility) (Old UI)
- How to manage EAPs in different subnets using Omada Controller (via DHCP option 138) (Old UI)
- How to manage EAPs at different sites across Internet using Omada Controller (via VPN Tunnel with EAP Discover Utility) (Old UI)
- How to manage EAPs at different sites across Internet using Omada Controller (via VPN Tunnel with DHCP Option138) (Old UI)
- How to manage EAPs at different sites across Internet using Omada Controller (via NAT Port Forwarding for Controller Host with EAP Discover Utility) (Old UI)
- How to manage EAPs at different sites across Internet using Omada Controller (via NAT Port Forwarding for Controller Host with DHCP Option138) (Old UI)
- How to manage EAPs in different VLANs using Omada Controller (Old UI)
- How to Change the Language of the Printed Voucher Code
- How to Configure Band Steering on TP-Link Omada Controller
- How to Configure Load Balance on Omada Controller
- How to Configure Reboot schedule and Wi-Fi Scheduler function of Omada Controller
- How to Install TP-Link Omada Discovery Utility on Windows and macOS PCs
- How to manage EAPs in different subnets using Omada controller (via EAP Discovery Utility) (New UI)
- How to manage EAPs at different places across Internet using Omada Controller (via NAT Port Forwarding and DHCP Option 138) (New UI)
- How to configure the WLAN Group function on the SDN Controller(New UI)
- How to set the PVID/VLAN ID for the second port on the EAP
- How to disable 5GHz WiFi for Omada EAP
- What if I forget the password of EAP Controller?
- How to configure the WLAN Group function on Omada Controller (V3 or below version)
- How to configure Multiple SSIDs with Multiple Subnets on EAP products
- What should be noticed when running the EAP Controller for the first time?
- How to adopt EAP in Controller Mode?
- How to back up and restore the configuration and data of your Software Controller (or OC200)
- How to Configure Omada Controller as a Windows Service(above Controller 2.5.4)
- How do I login to the web management page of the EAP Series products (Standalone mode)?
- Source code template for External Web Portal (Standalone Mode)
- How to manage EAPs at different places across internet using Omada Controller (via NAT Port Forwarding and EAP Discovery Utility)? (New UI)
- How to configure basic wireless settings of my TP-Link EAP in Standalone mode?
- How to configure basic wireless settings of my TP-Link EAP via Omada Controller?
- How to set up rate limit through EAP controller
- How to configure free authentication policy on EAP Controller
- How to Manage EAPs at Different Locations
- Hotspot authentication for multiple subnet with different VLANs
Програмне забезпечення
Звертаємо вашу увагу, що оновлення програмного забезпечення з російськомовної версії (RU) можливе тільки на російськомовну (RU => RU), а з європейської (EU) тільки на європейську (EU => EU). Змінити Програмне забезпечення з російськомовної версії на європейську чи навпаки НЕМОЖЛИВО!!! RU ≠> EU ; EU ≠> RU !
ДЛЯ ОНОВЛЕННЯ
ВАЖЛИВО: Щоб уникнути проблем при оновленні ПЗ, будь ласка, прочитайте наступну інформацію по процедурі оновлення.
- Перевірте відповідність апаратної версії і версії ПЗ. Використання невірної версії ПЗ може пошкодити ваш пристрій і анулювати гарантію. (Зазвичай V1.x = V1)
НЕ рекомендується встановлювати версію ПО, не призначену для вашого регіону. Натисніть тут для вибору регіону і завантажте найбільш актуальну версію програмного забезпечення.
- НЕ відключайте живлення під час процесу оновлення, оскільки це може завдати шкоди маршрутизатору
- НЕ оновлюйте ПЗ маршрутизатора по Wi-Fi, за винятком тих випадків, коли це є єдиним можливим способом.
- Рекомендується, щоб всі користувачі припинили використовувати всі інтернет-додатки на комп'ютері або відключили мережевий кабель від клієнтських пристроїв перед оновленням.
|
EAP225-Wall(EU)_V2_5.0.2 Build 20210316 |
Завантажити | |
|---|---|---|
| Дата публікації: 2021-04-27 | Мова: English | Розмір файлу: 7.11 MB |
|
This firmware fully adapts the Omada SDN platform but only compatible with Omada Controller v4.1.5 or above. If you are using an old Omada controller and plan to upgrade this firmware for EAP, you must upgrade the Omada Controller as well: Upgrade Guide |
||
|
EAP225-Wall(EU)_V2_5.0.0 Build 20200918 |
Завантажити | |
|---|---|---|
| Дата публікації: 2020-11-11 | Мова: English | Розмір файлу: 7.10 MB |
|
This firmware is fully adapted Omada SDN platform but only compatible with Omada controller v4.1.5 or above. If you are using old Omada controller and plan to upgrade firmware for EAP, then you must upgrade Omada controller as well. Please follow Upgrade Guide to upgrade the Omada Controller. |
||
|
EAP225-Wall(EU)_V2_1.20.0 Build 20200422 |
Завантажити | |
|---|---|---|
| Дата публікації: 2020-07-06 | Мова: English | Розмір файлу: 7.05 MB |
|
This firmware is fully adapted Omada SDN platform but only compatible with Omada controller v4.1.5 or above. If you are using old Omada controller and plan to upgrade firmware for EAP, then you must upgrade Omada controller as well, and please follow Upgrade Guide to upgrade Omada controller. If your EAP is working standalone, please note that the EAP will be reset after upgrading to this firmware and you need to re-configure your EAP. |
||
|
EAP225-Wall(EU)_V2_1.4.0 Build 20191213 |
Завантажити | |
|---|---|---|
| Дата публікації: 2020-03-02 | Мова: English | Розмір файлу: 7.60 MB |
|
EAP225-Wall(EU)_V2_1.3.1 Build 20191022 |
Завантажити | |
|---|---|---|
| Дата публікації: 2019-12-11 | Мова: English | Розмір файлу: 7.59 MB |
|
Recommended Controller Software Version: Omada Controller v3.2.x or above |
||
|
EAP225-Wall(EU)_V2_1.3.0 Build 20190722 |
Завантажити | |
|---|---|---|
| Дата публікації: 2019-11-08 | Мова: English | Розмір файлу: 7.59 MB |
|
Recommended Controller Software Version: Omada Controller v3.2.x or above
New Feature/Enhancement: 1. Change the OpenSSL version to 1.0.2q. 2. Optimize UI, including character optimization and display error correction.
Bug Fixed: 1. Fixed the bug that client devices can pass the portal authentication after disconnected from the Controller. 2. Fixed the bug that untag packets can be transferred to SSIDs with different VLANs. 5. Fixed the bug that some EAPs may disconnect from the Omada Controller in large scale network. 6. Fixed the bug that the management page may not be accessed after EAP is disconnected from the Controller. 7. Fixed the bug that when APs are disconnected from Controller, the rate limit configuration will be not issued to these APs after they are back to connected again. 8. Fixed the bug that when the time of EAP is synchronized with PC, it will be the same as PC's time not considering different time zones. 9. Fixed the bug that packets with VLAN tag can be forwarded to the SSID without wireless VLAN setting.
Notes: 1. For EAP225-Wall v2 only. 2. Your device's configuration won't be lost after upgrading. 3. This version of firmware is applied to Omada APP of version 2.1.X or above. |
||
|
EAP225-Wall(EU)_V2_1.2.0 Build 20190222 |
Завантажити | |
|---|---|---|
| Дата публікації: 2019-03-21 | Мова: English | Розмір файлу: 7.24 MB |
|
Recommended Controller Software Version: Omada Controller v3.1.x or above
New Feature/Enhancement: 1. Add Radius Accounting to External Radius Server in standalone mode. 2. Add SSID Radius accounting to WPA-Enterprise security mode. 3. Add SSL encryption in Auto Mail of Log Settings. 4. Support the feature of merging 2.4GHz and 5GHz SSID with Controller 3.1.4. 5. Support SSID MAC Authentication to none security mode with Controller 3.1.4. 6. Support channel utilization function with Controller 3.1.4. 7. Support Layer-3 Accessibility in SSH with Controller 3.1.4. 8. Change the rule of the LED when resetting/rebooting EAP.
Notes: 1. For EAP225-wall v2 only. 2. Your device's configuration won't be lost after upgrading. 3. This version of firmware is applied to Omada APP of version 2.1.X or above. |
||
|
EAP225-Wall(EU)_V2_1.1.0 Build 20181122 |
Завантажити | |
|---|---|---|
| Дата публікації: 2018-12-14 | Мова: English | Розмір файлу: 8.48 MB |
|
Recommended Controller Software Version: Omada Controller v3.0.x or above
New Feature/Enhancement: 1. Add Band Steering/LED Locate/Client rate limit/SSID rate limit Function in Standalone mode. 2. The SSID isolation function is promoted to the Guest Network Function. Wireless Clients connected with Guest SSID can’t communicate with each other and the local network. 3. Change the HTTP port of Portal authentication page from 80 to 22080 in standalone mode. 4. Add More Client Detail Log in standalone mode. 5. UI optimization.
Bug Fixed: 1. Fixed the bug that HTTPS redirection of Portal authentication page will be inoperative when Omada Controller and Omada EAP belong to different subnet. 2. Fixed the bug that HTTPS redirection of Portal authentication page will be inoperative when the IP address of Omada EAP and wireless clients belong to different subnet. 3. Fixed the bug that when we change the IP in standalone mode, the portal authentication page may not pop up successfully. 4. Fixed the bug that the wireless clients may not be redirected to portal authentication page by surfing HTTPS website if we enable Management VLAN function. 5. Fixed the bug that wireless clients connected with 2.4G SSID of EAP may receive broadcast packets from other VLAN. 6. Fixed the bug that the rate limit of Portal function may not take effect sometimes. 7. Fixed the bug that we may not login to the https web management page of EAP in standalone mode on MacBook.
Notes: 1. For EAP225-Wall v2 only. 2. Your device's configuration won't be lost after upgrading. |
||
|
EAP225-Wall(EU)_V2_1.0.0 Build 20180418 |
Завантажити | |
|---|---|---|
| Дата публікації: 2018-08-07 | Мова: English | Розмір файлу: 8.43 MB |
|
Recommended Controller Software Version: Omada Controller v 2.6.x or above New Features/Improvements: First firmware released for EAP225-Wall(EU)_V2 Notes: 1. EAP225-Wall(EU)_V2 2. Your device's configuration won't be lost after upgrading |
||
Використання стороннього ПЗ на пристроях TP-Link
Офіційне програмне забезпечення пристроїв TP-Link може бути замінено на стороннє, наприклад, на DD-WRT. TP-Link не зобов'язаний надавати сервісну або технічну підтримку для пристроїв із стороннім ПЗ і не гарантує його стабільну роботу. Збиток, нанесений пристрою в результаті використання стороннього ПЗ, анулює його гарантію.
Відкритий вихідний код для програмістів (GPL)
Наступна інформація призначена для програмістів і не представляє значимість для більшості кінцевих користувачів продукції TP-Link.
Продукція TP-Link містить код, розроблений третіми особами, включаючи код, розроблений відповідно до Універсальної громадської ліцензії GNU (GPL) версії 1 / версії 2 / версії 3 або відповідно до Стандартної громадської ліцензії обмеженого використання GNU (LGPL). Ви можете використовувати відповідне програмне забезпечення на умовах ліцензії GPL.
Ви можете переглянути, роздрукувати і завантажити відповідні умови ліцензії GPL тут. У Центрі вихідних кодів GPL ви отримуєте для завантаження вихідний код GPL відповідного забезпечення, яке використовується в продукції TP-Link, а також іншу інформацію, включаючи список ПЗ TP-Link, що містить вихідний код GPL.
Додаток
- Omada APP
TP-Link Omada дозволяє налаштовувати параметри, відстежувати стан мережі та керувати клієнтами – і все це зручно зі смартфона чи планшета. Дізнайтеся більше про Сумісні пристрої.
Примітка: Комутатор/маршрутизатор SDN сумісний із додатком Omada лише в режимі контролера. Щоб використовувати Omada, оновіть мікропрограму свого пристрою до останньої версії.
Q&A
Посібник з налаштування функцій
- Introduction of EAP Adoption
- Configuration Guide for Facebook Portal on Omada Controller 2.6.x
- How To Configure Cloud Access for Remote Management
- Methods for Managing the Omada EAPs Network
- Quick Start Guide_Standalone_EAP
- Managing System_Standalone EAP
- Managing EAP_Standalone EAP
- Configuring EAP_Standalone EAP
- Application Example_ Standalone EAP