How to configure EAP610-Outdoor in RE mode
18475 EAP610-Outdoor can be configured as RE (Repeater) from firmware 1.1.3 Build 20230330. This article introduces two methods of the RE mode configuration.
Note: before RE mode configuration, please make sure your device is in factory default.
1. Get your PC and EAP610-Outdoor in one subnet and login to EAP standalone management page via EAP’s IP address.
2. Set up a new account then choose to enter RE mode.
3. Choose your preferred band, click Scan button to find available SSID to join and repeat signal.
4. Join the target SSID then customize repeater SSID of EAP610-Outdoor.
5. Finish setup and enjoy Wi-Fi with the extended coverage.
1. Get your wireless device connected to default SSID of EAP610-Outdoor, open Omada APP, go to Standalone APs page and click the EAP610-Outdoor.
2. Set up a new account then choose to enter RE mode.
3. Choose your preferred band, click SSID item in the below to start scanning to find and join available SSID for repeating.
4. Customize repeater SSID of EAP610-Outdoor.
5. Finish setup and enjoy Wi-Fi with the extended coverage.
Был ли этот FAQ полезен?
Ваш отзыв поможет нам улучшить работу сайта.
Сообщество TP-Link
Нужна помощь? Задавайте вопросы, находите ответы и обращайтесь за помощью к специалистам TP-Link и другим пользователям со всего мира.