Setup Video

  • Configuring and Mounting the Deco X50-Outdoor.

    Introducing the Deco X50-Outdoor. This Deco is designed to be an outdoor add-on to your existing Deco network. With an IP65 rating and two ways to power this versatile add-on is a must-have for any Deco owner wanting to expand their mesh network outside or even to a detached building like a shed or garage.

    More Fold
  • How to Configure a Deco System with Starlink

  • How to Resolve Double NAT using Starlink

  • How to Remove the Base Plate from a Deco X50-Outdoor

FAQs

Firmware

A firmware update can resolve issues that the previous firmware version may have and improve its current performance.

To Upgrade

IMPORTANT: To prevent upgrade failures, please read the following before proceeding with the upgrade process

  • Please upgrade firmware from the local TP-Link official website of the purchase location for your TP-Link device, otherwise it will be against the warranty. Please click here to change site if necessary.
  • Please verify the hardware version of your device for the firmware version. Wrong firmware upgrade may damage your device and void the warranty. (Normally V1.x=V1)
    How to find the hardware version on a TP-Link device
  • Do NOT turn off the power during the upgrade process, as it may cause permanent damage to the product.
  • To avoid wireless disconnect issue during firmware upgrade process, it's recommended to upload firmware with wired connection unless there is no LAN/Ethernet port on your TP-Link device.
  • It's recommended that users stop all Internet applications on the computer, or simply disconnect Internet line from the device before the upgrade.
  • Use decompression software such as WinZIP or WinRAR to extract the file you download before the upgrade.

Deco X50-Outdoor(EU)_V1_1.2.5 Build 20231121

Download
Published Date: 2023-12-25 Language: Multi-language File Size: 30.67 MB

Improvements and Bug Fixes:
1. Fixed some security vulnerabilities.
2. Newly supports 32-bit subnet mask in both DHCP and static IP connection.
3. Fixed some other bugs.

Deco X50-Outdoor(EU)_V1_1.2.3 Build 20230912

Download
Published Date: 2023-09-26 Language: Multi-language File Size: 30.43 MB

New features:
1. Supported for customizing Satellite Deco signal source.
2. Supported for customizing Clients connection preference.
3. Supported for Reboot Schedule.
4. Supported for NO-IP and DynDNS.
5. Added Smart DHCP switch under Access Point mode.
6. Added the static route function.
7. Added the ability to customize the MTU.
8. Added IoT network function.
9. Added VPN server/client features, including Open VPN, L2TP VPN and PPTP VPN.
10. Added SafeSearch function and Youtube Restrict function in the Homeshield.
11. Added WiFi Network switch on Web UI.

Improvements and Bug fixes:
1. Optimized the Monthly Reports function.
2. Optimized the Clients List function.
3. Optimized the HomeShield feature, please update your Deco app (iOS version 3.3.55 or above, Android version 3.3.65 or above) to fully utilize it.
4. Fixed some security vulnerability.
5. Fixed the bug that X50-Outdoor 5G backhual fails in some scenes.
6. Fixed the bug that X50-Outdoor shows offline in the APP in some scenes.
7. Fixed some bugs.

Notes:
1.Please update your Deco APP to the latest version for the new features.
2.If there are other Deco models in your Deco network, you may miss some new features till other models release updates in the near future.
 

Deco X50-Outdoor(EU)_V1_1.0.1 Build 20230105

Download
Published Date: 2023-08-01 Language: Multi-language File Size: 29.53 MB

The first firmware released.

To Use Third Party Firmware In TP-Link Products

Some official firmware of TP-Link products can be replaced by the third party firmware such as DD-WRT. TP-Link is not obligated to provide any maintenance or support for it, and does not guarantee the performance and stability of third party firmware. Damage to the product as a result of using third party firmware will void the product's warranty.

Open Source Code For Programmers (GPL)

Please note: The products of TP-Link partly contain software code developed by third parties, including software code subject to the GNU General Public Licence (“GPL“), Version 1/Version 2/Version 3 or GNU Lesser General Public License ("LGPL"). You may use the respective software condition to following the GPL licence terms.

You can review, print and download the respective GPL licence terms here. You receive the GPL source codes of the respective software used in TP-Link products for direct download and further information, including a list of TP-Link software that contain GPL software code under GPL Code Center.

The respective programs are distributed WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the respective GNU General Public License for more details.

Apps

TP-Link Deco

The Deco app allows you to quickly and easily install and manage your Deco Whole-Home Wi-Fi System.

From United States?

Get products, events and services for your region.