Hulpprogramma

USB_Printer_Controller_Utility_Mac

Download
Publicatiedatum: 2022-02-21 Taal: Engels Bestandsgrootte: 1.75 MB
Besturingssysteem: Mac OS 10.15/11.x/12.x

USB_Printer_Controller_Utility_Mac

Download
Publicatiedatum: 2018-10-29 Taal: Engels Bestandsgrootte: 2.53 MB
Besturingssysteem: Mac OS 10.9-10.14

USB_Printer_Controller_Installer_for_MAC_10.11

Download
Publicatiedatum: 2016-09-02 Taal: Engels Bestandsgrootte: 2.37 MB
Besturingssysteem: MAC 10.11

Notes:

For MAC OS 10.11

TD-W9980_V1_USB Printer Controller_Utility

Download
Publicatiedatum: 2015-07-01 Taal: Engels Bestandsgrootte: 15.03 MB
Besturingssysteem: Win2000/XP/Vista/7/8/8.1/10

Notes:

For TD-W9980_V1

Setup Video

  • How to turn a router into an Access Point?

FAQs

Firmware

A firmware update can resolve issues that the previous firmware version may have and improve its current performance.

To Upgrade

IMPORTANT: To prevent upgrade failures, please read the following before proceeding with the upgrade process

  • Please upgrade firmware from the local TP-Link official website of the purchase location for your TP-Link device, otherwise it will be against the warranty. Please click here to change site if necessary.
  • Please verify the hardware version of your device for the firmware version. Wrong firmware upgrade may damage your device and void the warranty. (Normally V1.x=V1)
    Hoe vind ik de hardware versie van een TP-Link product?
  • Do NOT turn off the power during the upgrade process, as it may cause permanent damage to the product.
  • To avoid wireless disconnect issue during firmware upgrade process, it's recommended to upload firmware with wired connection unless there is no LAN/Ethernet port on your TP-Link device.
  • It's recommended that users stop all Internet applications on the computer, or simply disconnect Internet line from the device before the upgrade.
  • Use decompression software such as WinZIP or WinRAR to extract the file you download before the upgrade.

TD-W9980_V1_160125

Download
Publicatiedatum: 2016-01-25 Taal: Engels Bestandsgrootte: 7.75 MB

Modifications and Bug Fixes:

Bug Fixed:
1.Fixed the bug that can not get the IPv6 Gateway within ZEN of UK.
2.Fixed the bug that DSL error packet shows abnormal.
3.Fixed the bug that can not get the DNSv6 and LAN IPv6 prefix automatically.

Notes:

1.For TD-W9980(UN)_V1
2.Your device's configuration won't be lost after upgrating;
3.The device cannot be downgraded after the upgrade.
 

TD-W9980_V1_150507

Download
Publicatiedatum: 2015-05-07 Taal: Engels Bestandsgrootte: 7.65 MB

Modifications and Bug Fixes:

New Features/Enhancement:

1.The prefix length of the Static IP of IPV6 now can be changed from 0 to 128.

2.Updated the ISP information list.

3.Improved the performance of Wireless 5GHz in short distances.

Bug Fixed:

1.Fixed the bug that the speed dropped on the BT line of UK when G.INP was enabled.

2.Fixed the kcodes security bug.

3.Fixed the bug that TD-W9980 had compatibility issues with the line of ZEN in UK.

4.Fixed the bug that TD-W9980 had compatibility issues with the line of TALK TALK in UK.

5.Fixed the bug that static IPV6 connection did not take effect after a reboot.

Notes:

1. For TD-W9980_V1 

2. Old firmware’s configuration file can be imported into this new firmware.

3. Your device’s configuration won't be lost after upgrading, which means you needn't to configure your device again after upgrading.

TD-W9980_V1_141215

Download
Publicatiedatum: 2014-12-15 Taal: Engels Bestandsgrootte: 7.65 MB

Modifications and Bug Fixes:

  1. New Features/Enhancement:
    (1)Added some new ISP information.
    (2)Improved the compatibility with ISP OTE in Greece.
  2. Bug Fixed:
    (1)Fixed the bug that sometimes Youview can't be played in UK.
    (2)Fixed the bug that Internet can't work normally when PPP password was blank.
    (3)Fixed the bug that Diagnostic page may not be shown correctly sometimes.

Notes:

For TD-W9980 V1

Gebruik van Firmware van Derde Partijen in TP-Link Producten 

Sommige officiële firmware voor TP-Link producten kunnen vervangen worden door firmware van derde partijen, zoals DD-WRT. TP-Link is niet verplicht hier onderhoud of ondersteunig op te bieden en garandeert ook niet prestaties of stabiliteit van firmware van een derde partij. Schade aan het product door gebruik van firmware van een derde partij zal de garantie doen vervallen. 

Open Source Code voor Programmeerders (GPL)

 

Houd er rekening mee dat: De producten van TP-Link deels software codes bevatten van derde partijen, inclusief software codes naar de GNU General Public Licence (“GPL“), Versie 1/Versie 2/Versie 3 of GNU Lager General Public License ("LGPL"). U kunt de betreffende software voorwaarde gebruiken in lijn met de GPL licentievoorwaarden.

U kunt de betreffende GPL licentievoorwaren hier bekijken, printen en downloaden. U vindt de download van de GPL source codes van de betreffende software in een TP-Link product en meer informatie, inclusief een lijst met TP-Link software voorzien van GPL software codes, onder GPL Code Center.

De betreffende programma's zijn uitgegeven ZONDER ENKELE GARANTIE; Zelfs ZONDER de impliciete garantie van VERKOOPBAARHEID of GESCHIKTHEID VOOR EEN BEPAALDE DOEL. Zie de betreffende GNU See the respective GNU Algemene Openbare Licentie voor meer details.

GPL Code

Emulators

Firmware versie
Working Mode
Taal
140613
-
Engels

Note:

1. This Emulator is a virtual web GUI where you can program your TP-Link product firmware. For details about an individual product’s features and specifications please use the search facility and go to the product page.

2. Please check the firmware version corresponds to the version shown on the Emulator interface. Each firmware version has its own GUI and functionality.

3. Please note that not all firmware versions are represented on the Emulator.

From United States?

Get products, events and services for your region.