Descarga para SG2005P-PD
- Documento
1_normal_20230821011545t.png)
Switch Omada Smart de 5 puertos Gigabit, 1 PoE++ In y 4 PoE+ Out para exteriorController Software
The EAP Controller is used to manage multiple EAPs intensively.
|
Omada_SDN_Controller_v5.13.30.8_linux_x64.deb |
Descargas | |
|---|---|---|
| Fecha de Publicación : 2024-02-27 | Idioma: Multi-language | Tamaño del Archivo : 189.79 MB |
Sistema de Operación : Ubuntu 16.04/18.04/20.04/22.04, Debian 8/9/10 |
||
|
As this version optimizes the WAN/LAN port configuration of Omada Gateway, it will cause some WAN ports to be enabled by default and cannot be disabled. This may result in changes to the load balance configuration, you can make the changes manually. |
||
|
Omada_SDN_Controller_v5.13.30.8_linux_x64.tar.gz |
Descargas | |
|---|---|---|
| Fecha de Publicación : 2024-02-27 | Idioma: Multi-language | Tamaño del Archivo : 202.04 MB |
Sistema de Operación : Ubuntu 16.04/18.04/20.04/22.04, Debian 8/9/10 |
||
|
As this version optimizes the WAN/LAN port configuration of Omada Gateway, it will cause some WAN ports to be enabled by default and cannot be disabled. This may result in changes to the load balance configuration, you can make the changes manually. |
||
Preguntas Frecuentes
- Omada Switch DHCP Relay Configuration Guide
- Suggested configurations for AVoIP protocols on Omada Switches
- How to configure MVR on Omada Switches via Omada Controller
- How to configure MLD Snooping on Omada Switches
- How to configure Class of Service (CoS) through Omada Controller
- How to configure Auto-VoIP on Omada Switches via Omada Controller
- How to configure LLDP & LLDP-MED on Omada Switches via Omada Controller
- Configuration guide of DHCP Options on Omada Switch
- Troubleshooting of Layer 2 Multicast Failure
- How to configure TACACS+ Authentication on switches via Omada Controller
- How to configure IGMP Snooping on Omada switches for hotel IPTV scenario
- How to configure 802.1X VLAN Assignment on Omada Controller
- Recommended ACL configuration on Omada Switch for common scenarios
- How to configure AAA to assign different privileges for radius users to login on Omada Switch
- Getting started without an Omada Controller
- How to configure Management VLANs for Omada Switches and APs (for SOHO scenario)
- How to configure Management VLANs for Omada Switches and APs (for Business scenario)
- How to configure Voice VLAN on Omada Switches using Omada Controller
- How to configure 802.1Q VLAN on Omada Switches when used with a third-party router
- What should I do if my switch has no Internet access?
- What should I do if my Internet from switch is unstable?
- How to setup Switch as DHCP server on Omada Controller
- How to configure DHCP Auto Install to let switch get configuration file and image from TFTP server
- How to build an 802.1X access authentication system using Switches on Omada Controller
- How do I know the type of my Omada switch?
- How to configure VLAN Interfaces and Static Routes on Omada Switches
- Troubleshooting for Voice VLAN and Auto VoIP
- Troubleshooting for 802.1X (Dot1X) Authentication Fails on Omada Switch
- Troubleshooting for RADIUS Authentication Failure
- What to do if devices in the same VLAN fail to communicate with each other when connected to TP-Link switch
- What to do if Omada Device Adoption Failure
- How to Configure LAG (LACP) on Omada Switches in Controller Mode
- Best practice to prevent network loops with Omada SDN solution
Apps
- Omada APP
TP-Link Omada lets you configure settings, monitor network status and manage clients, all from the convenience of a smart phone or tablet. Learn more about Compatible Devices.
Note: SDN switch/router is compatible with Omada App only in controller mode. To use Omada, please update your device's firmware to the latest version.