Descarga para T3700G-28TQ
- Product Overview
Switch Gestionable Gigabit L3 Apilable JetStream de 28 puertosArchivos MIBs
|
T3700G-28TQ(UN)_V1_MIB_160112 |
Descargas | |
|---|---|---|
| Fecha de Publicación : 2016-01-12 | Idioma: Inglés | Tamaño del Archivo : 127 KB |
Sistema de Operación : Win2000/XP/2003/Vista/7/8/8.1/10/Mac/Linux |
||
|
Notes: For T3700G-28TQ_V1_160112. |
||
|
T3700G-28TQ_V1_MIB_150313 |
Descargas | |
|---|---|---|
| Fecha de Publicación : 2015-03-13 | Idioma: Inglés | Tamaño del Archivo : 122 KB |
Sistema de Operación : Win2000/XP/2003/Vista/7/8/8.1/10/Mac/Linux |
||
|
Notes: For T3700G-28TQ V1 150313 and subsequent versions. |
||
Cliente 802.1X
|
TP-LINK_802.1X_Client_Software |
Descargas | |
|---|---|---|
| Fecha de Publicación : 2017-09-05 | Idioma: Inglés | Tamaño del Archivo : 5.5MB |
Sistema de Operación : Win2000/XP/2003/Vista/7/8/8.1/10 |
||
|
|
||
Preguntas Frecuentes
- How to Configure Management VLAN on TP-Link Smart and Managed Switches Using the New GUI
- How to configure LACP on our Smart/ Managed Switch
- How to Block Unknown Devices to Access the Switch by Using IP Source Guard
- Why the firmware version does not change after upgrading in T Series switches?
- How to Upgrade Firmware of a Switch via the Bootutil Menu
- How to configure IGMP Snooping for IPTV network using L2 switch
- How to configure the default gateway of the smart and managed switches using the old GUI
- What is the Console Cable and the line sequence of it?
- How to build a Factory Network using TP-Link products
- How to build a Campus Network using TP-LINK products
- How to build a Wireless Network for Dormitory using tp-link products
- How to set up an Enterprise VPN using tp-link products
- How to build a Wireless Network for Shopping Mall using tp-link products
- The difference between the Voice VLAN feature and Auto VOIP feature
- What should I do if I cannot access the web management page of my TP-Link switch?
- Do you still have any doubt about the effect of QoS on the Switch of TP-Link?
- How to block an illegal client with Certain IP address from getting access to the network using TP-Link Managed Switches
- How to enter the BootUtil Menu to factory reset the switch with the console cable
- ¿Cómo obtener acceso al interruptor administrado L2 a través del puerto de la consola?
- ¿Cómo se configura el VLAN de etiqueta en los Switches Administrables L2?
- How to Configure Port Isolation Function on Our Layer 2 Manage switches through Web Browser
- How to limit the port rate of the incoming traffic via ACL function
- How to test the Jumbo Frame pass-through feature on TP-Link switches
- How to build up a multi-nets network via Multi-Nets NAT feature on TP-Link router with L2+/L3 switches
- How to configure VLAN VPN on L2 Managed switches using the old GUI
- How to configure RSTP on TP-Link switches using the old GUI
- ¿Cómo cambiar la dirección IP del Switch TP-Link usando la Web GUI y CLI?
- How to configure MAC ACL on Smart/Managed switch
- How to configure the DHCP Relay in TP-Link Switch
- How to configure Voice VLAN to optimize the transmission of voice traffic on TP-Link Smart and Managed Switches using the new GUI
- How to manage the switch with Mac via Micro USB cable
- How to achieve AAA Authentication through TACACS + server on the switch
- How to configure OpenSSH 7.0(and above) to login smart and managed switches?
- How to configure Extended IP ACL
Firmware
A firmware update can resolve issues that the previous firmware version may have and improve its current performance.
To Upgrade
IMPORTANT: To prevent upgrade failures, please read the following before proceeding with the upgrade process
- Please upgrade firmware from the local TP-Link official website of the purchase location for your TP-Link device, otherwise it will be against the warranty. Please click here to change site if necessary.
- Please verify the hardware version of your device for the firmware version. Wrong firmware upgrade may damage your device and void the warranty. （Normally V1.x=V1）
¿Cómo encontrar la versión del hardware en un dispositivo TP-Link? - Do NOT turn off the power during the upgrade process, as it may cause permanent damage to the product.
- To avoid wireless disconnect issue during firmware upgrade process, it's recommended to upload firmware with wired connection unless there is no LAN/Ethernet port on your TP-Link device.
- It's recommended that users stop all Internet applications on the computer, or simply disconnect Internet line from the device before the upgrade.
- Use decompression software such as WinZIP or WinRAR to extract the file you download before the upgrade.
|
T3700G-28TQ(UN)_V1_160112 |
Descargas | |
|---|---|---|
| Fecha de Publicación : 2016-01-12 | Idioma: Inglés | Tamaño del Archivo : 5.36 MB |
|
Modifications and Bug Fixes: New Features/Enhancement 1.fixed the stacking failure problem by NTP settings. 2.Improved StabilityNotes: For T3700G-28TQ V1. |
||
|
T3700G-28TQ_V1_MIB_150313 |
Descargas | |
|---|---|---|
| Fecha de Publicación : 2015-03-13 | Idioma: Inglés | Tamaño del Archivo : 122 KB |
|
Notes: For T3700G-28TQ V1 150313 and subsequent versions. |
||
|
T3700G-28TQ_V1_20150313 |
Descargas | |
|---|---|---|
| Fecha de Publicación : 2015-03-13 | Idioma: Inglés | Tamaño del Archivo : 5.36 MB |
|
Modifications and Bug Fixes: Enhancement： 1.Improved the stability of stacking feature. Bug fixed: 1.Fixed the bug that when more than 2 ports are enabled LACP and the peer switch has one port with LACP disabled,the port status is suggested to be set as 0x5. 2.Fixed the bug that the hardware routing table of the stacking system crashes after about twenty minutes if there is a large number of ARP entries transferring frequently. 3.Fixed the bug that aggregated ports act abnormal after changing unit ID. 4.Fixed the bug that when stacked T3700 acts as an DHCP server,its routing table can not transfer correctly when a large number of clients renew/release dynamic IP address frequently. 5.Fixed the bug that process hangs out when two PCs managing T3700 and checking the routing table using telnet simultaneously. Notes: 1. For T3700G-28TQ_V1 2. Old firmware’s configuration file can be imported into this new firmware. 3. Your device’s configuration won't be lost after upgrading, which means you needn't to configure your device again after upgrading. |
||
To Use Third Party Firmware In TP-Link Products
Some official firmware of TP-Link products can be replaced by the third party firmware such as DD-WRT. TP-Link is not obligated to provide any maintenance or support for it, and does not guarantee the performance and stability of third party firmware. Damage to the product as a result of using third party firmware will void the product's warranty.
Open Source Code For Programmers (GPL)
Please note: The products of TP-Link partly contain software code developed by third parties, including software code subject to the GNU General Public Licence (“GPL“), Version 1/Version 2/Version 3 or GNU Lesser General Public License ("LGPL"). You may use the respective software condition to following the GPL licence terms.
You can review, print and download the respective GPL licence terms here. You receive the GPL source codes of the respective software used in TP-Link products for direct download and further information, including a list of TP-Link software that contain GPL software code under GPL Code Center.
The respective programs are distributed WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the respective GNU General Public License for more details.