Descarga para CPE220 V3

Por favor, elija la versión de hardware:

V3

>Cómo encontrar la versión de hardware en un dispositivo de TP-Link

IMPORTANTE : la disponibilidad del modelo y la versión de hardware varía según la región. Consulte su sitio web regional de TP-Link para determinar la disponibilidad del producto.
Product Overview
Manual

Software de control

Pharos Control_2.0.0-1_Linux

Descarga
Fecha de Publicación: 2017-12-21 Idioma: Inglés Tamaño de Archivo: 47.68 MB
Sistema Operativo: Linux (Debian/Ubuntu)

Modifications and Bug Fixes:

1. Use the B/S structure and inherit the functions of PharOS Control v1.
2. Add the Google Map and some other new functions.

Notes:

1. For PharOS CPE/WBS series wireless broadband products(including v1 devices).
2. Require to install Java (v1.7 or above) in Linux before running this software.

Pharos Control_2.0.4_Windows

Descarga
Fecha de Publicación: 2017-12-21 Idioma: Inglés Tamaño de Archivo: 72.35MB
Sistema Operativo: Windows server2003/2008/2012/2016 and Vista/7/8/10

Modifications and Bug Fixes:

New Features/Enhancements:
1. Use the B/S structure and inherit the functions of PharOS Control v1.
2. Add the Google Map and some other new functions.

Notes:

For PharOS CPE/WBS series wireless broadband products (including v1 devices).

Setup Video

Preguntas Frecuentes

Forum

Introduction about WDS system
What's WDS? Why does it matter when deploying wireless? When should I enable the WDS opiton in wireless settings? Check this thread for an introduction.

Firmware

A firmware update can resolve issues that the previous firmware version may have and improve its current performance.

To Upgrade

IMPORTANT: To prevent upgrade failures, please read the following before proceeding with the upgrade process

  • Please upgrade firmware from the local TP-Link official website of the purchase location for your TP-Link device, otherwise it will be against the warranty. Please click here to change site if necessary.
  • Please verify the hardware version of your device for the firmware version. Wrong firmware upgrade may damage your device and void the warranty. (Normally V1.x=V1)
    Cómo encontrar la versión de hardware en un dispositivo de TP-Link
  • Do NOT turn off the power during the upgrade process, as it may cause permanent damage to the product.
  • To avoid wireless disconnect issue during firmware upgrade process, it's recommended to upload firmware with wired connection unless there is no LAN/Ethernet port on your TP-Link device.
  • It's recommended that users stop all Internet applications on the computer, or simply disconnect Internet line from the device before the upgrade.
  • Use decompression software such as WinZIP or WinRAR to extract the file you download before the upgrade.

CPE220(UN)_V3_20180928

Descarga
Fecha de Publicación: 2018-10-29 Idioma: Inglés Tamaño de Archivo: 4.94 MB

Modifications and Bug Fixes:
1. Fixed the problem that the device may be reset to factory defaults due to unstable power.
2. Improved web UI display.
3. Fixed the problem that Transmit Power could be set as improper value.
4. Fixed the problem that when the wireless interference is serious, the client may be not connected to the AP when the WPA/WPA2 encryption mode is enabled.
5. Fixed the problem that the "Failed to get data" information may be wrongly displayed.
 

CPE220(UN)_V3_180109

Descarga
Fecha de Publicación: 2018-02-13 Idioma: Inglés Tamaño de Archivo: 4.70 MB

Modifications and Bug Fixes:
1. Fixed the WPA2 vulnerability.
2. Fixed the Management VLAN issue that wireless clients will fail to obtian IP addresses when Management VLAN is enabled and given a same VLAN ID as that of SSID VLAN.  
3. Improved web UI display.
4. Fixed the bug that a subnet range cannot be configured for the "Set Source" of the SNMP function.
5. Fixed the bug that CPE's web management page can't be accessed with a new username which contains special symbols.
6. Fixed the bug that when the management vlan and wireless encryption are enabled, wireless client may fail to connect to the CPE.

Note:
For CPE220 3.0

CPE220(UN)_V3_20170825

Descarga
Fecha de Publicación: 2017-12-21 Idioma: Inglés Tamaño de Archivo: 4.91 MB

Modifications and Bug Fixes:

Modifications:
1.Improved lan to lan transmission performance.
2.Improved wireless performance and stability.
3.Improved the web UI interaction of MAC Filter.

Notes:

For CPE220(UN)3.0

To Use Third Party Firmware In TP-Link Products

Some official firmware of TP-Link products can be replaced by the third party firmware such as DD-WRT. TP-Link is not obligated to provide any maintenance or support for it, and does not guarantee the performance and stability of third party firmware. Damage to the product as a result of using third party firmware will void the product's warranty.

Open Source Code For Programmers (GPL)

Please note: The products of TP-Link partly contain software code developed by third parties, including software code subject to the GNU General Public Licence (“GPL“), Version 1/Version 2/Version 3 or GNU Lesser General Public License ("LGPL"). You may use the respective software condition to following the GPL licence terms.

You can review, print and download the respective GPL licence terms here. You receive the GPL source codes of the respective software used in TP-Link products for direct download and further information, including a list of TP-Link software that contain GPL software code under GPL Code Center.

The respective programs are distributed WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the respective GNU General Public License for more details.

GPL Code

Emulators

Versión de Firmware
Modo de operación
Idioma
170609
-
Inglés

Nota:

1. Este simulador es una GUI web virtual donde se puede consultar el firmware del producto TP-Link. Para obtener más información sobre las características y especificaciones de un producto individual, utilice la herramienta de búsqueda y vaya a la página del producto.

2. Compruebe que la versión del firmware corresponde a la versión mostrada en la interfaz del Emulador. Cada versión de firmware tiene su propia GUI y funcionalidad.

3. Tenga en cuenta que no todas las versiones de firmware están representadas en el Simulador.

De United States?

Obtener productos, eventos y servicios para su región.