Download untuk EAP620 HD
Vx.0=Vx.6/Vx.8/Vx.9(eg:V1.0=V1.6/V1.8V1.9)
Vx.x0=Vx.x6/Vx.x8/Vx.x9 (eg:V1.20=V1.26/V1.28/1.29)
Vx.30=Vx.32/Vx.33 (eg:V3.30=V3.32/V3.33)
AX1800 Ceiling Mount WiFi 6 Access PointController Software
The EAP Controller is used to manage multiple EAPs intensively.
|
Omada_SDN_Controller_V4.3.5_linux_x64.deb |
Download | |
|---|---|---|
| Tanggal Publikasi: 2021-05-07 | Bahasa: Inggris | Ukuran File: 59.39 MB |
Sisterm Operasi: Ubuntu 14.04/16.04/17.04/18.04/Debian |
||
|
If you are planning to upgrade from the old controller(v3.2.14 or below) to this version, please read the: Omada Controller Upgrade Guide Some new functions of the Controller require device firmware support, and the supporting firmware for routers and switches will be released soon. |
||
|
Omada_SDN_Controller_V4.3.5_linux_x64.tar |
Download | |
|---|---|---|
| Tanggal Publikasi: 2021-05-07 | Bahasa: Inggris | Ukuran File: 60.90 MB |
Sisterm Operasi: Ubuntu 14.04/16.04/17.04/18.04, CentOS 6.x/7.x and Fedora 20 or above, Debian. |
||
|
If you are planning to upgrade from the old controller(v3.2.14 or below) to this version, please read the: Omada Controller Upgrade Guide Some new functions of the Controller require device firmware support, and the supporting firmware for routers and switches will be released soon. |
||
Setup Video
-
How to Set Up the Whole Network of Gateway, Switches, and EAPs Using Omada SDN Controller
This video will demonstration how to do a full configuration with TP-Link Omada products including gateway, switches and EAPs. As an example, we are going to build the wired and wireless networks from scratch at our TP-Link Office. The setup consists of 7 steps: Step 1. Log in to the Controller Step 2. Adopt Devices Step 3. View Dashboard and Menus Step 4. Set up WAN Step 5. Set up LAN and VLANs Step 6. Set up Wi-Fi Step 7. Set up ACL
More Fold -
How to Install and Set Up Omada Software Controller
This video will show you how to install and set up the Omada Software Controller, using the Windows version for demonstration.
More Fold -
How to Adopt Omada Devices via Omada Controller
This video will show you how to adopt Omada devices and configure a gateway network via the Omada SDN Controller (Omada Software Controller is used as an example).
More Fold -
How to add devices with Zero-Touch Provisioning (ZTP) via Could-Based Controller
This video will show you How to add devices with Zero-Touch Provisioning (ZTP) via Could-Based Controller.
More Fold -
How to Monitor and Manage Devices via Omada SDN Controller
This video will show you how to monitor and manage devices via Omada SDN Controller.
More Fold -
How to Configure Schedules to Automate Network Control via Omada SDN Controller
This video shows how to configure WLAN Schedule, Port Schedule (PoE Schedule, Port Schedule), Upgrade Schedule, and Reboot Schedule to help you easily manage your network using the Omada Software Controller for demonstration.
More Fold -
How to Monitor and Manage Clients via Omada SDN Controller
This video will show you how to monitor and manage clients via Omada SDN Controller.
More Fold -
How to Check the Clients Signal Strength and Estimate the Actual Speed
This video will show you how to check the client signal strength and estimate actual network speeds.
More Fold -
How to Create User Accounts on Omada SDN Controller
This video shows how to create custom roles, local user accounts and cloud user accounts of different levels on the Omada SDN Controller.
More Fold -
How to Set Wireless SSID for Different Users via Omada SDN Controller
This video will show you how to set wireless SSIDs for different users via the Omada SDN Controller.
More Fold -
How to Configure No Authentication Portal via Omada SDN Controller
This video will show you how to configure No Authentication Portal via the Omada SDN Controller.
More Fold -
How to Configure Voucher Portal for Different Privilege Users via Omada SDN Controller
This video will show you how to configure the voucher portal for users with different privileges via the Omada Software Controller.
More Fold -
How to Use Heat Maps to Deploy Your Network via the Omada SDN Controller
This video will show you how to use heat maps to deploy your network via the Omada SDN Controller.
More Fold -
How to Configure Fast Roaming via the Omada SDN Controller
This video will show you how to configure Fast Roaming via the Omada SDN Controller.
More Fold -
How to Build an Omada Mesh Network via the Omada SDN Controller
This video will show you how to build an omada mesh network via the Omada SDN Controller.
More Fold -
How to Configure Bandwidth Control via Omada SDN Controller
This video will show you how to configure bandwidth control via Omada SDN Controller.
More Fold -
How to Set up a TP-Link EAP via Web browser
This video will demonstrate how to set up a TP-Link EAP via a web browser. The setup consists of three steps:
1. Connect the EAP to the network
2. Log into the EAP (via a wired/wireless connection)
3. Change the default SSID
This video is suitable for users with a small number (1-3) of EAPs .
More Fold
FAQs
- Instructions for SSID security settings on Omada Controller
- How to configure MAC-Based Authentication on Omada Controller
- How to configure Fast Roaming on Omada Controller
- How to configure SSID VLAN on Omada AP with Third-Party Gateway
- How do I configure 802.11 Rate Control on the Omada Controller
- Should I keep the Omada Controller running after configuration?
- Getting started with the standalone EAP
- What can I do If Omada App can’t find my AP
- How to get sarted with Standalone Access Points without Omada Controller
- How to configure ACL on Omada AP via Omada Controller
- How to configure abnormal on Omada Pro Controller
- Understanding and implementing Minimum RSSI
- How to configure guest network on Omada Controller
- Typical SSH commands for Omada AP troubleshooting
- Troubleshooting: AP goes offline abnormally
- How to configure 802.11r to speed up the roaming process
- How to configure Multicast Filtering on Omada Controller
- Troubleshooting guide of roaming
- Troubleshooting guide of common wireless issues
- What's the difference between Master Administrator, Administrator and Viewer account in Omada Controller?
- How to use the Ping tool in Omada APP
- How to downgrade firmware of EAP if it is abnormal after the update
- Overview of Omada EAP Power Supply
- Explanation of portal authentication failure after EAP is extended with Range Extenders
- How to use the Recovery Mode to recover the firmware for EAP
- How to use iPerf to test the speed between the EAP and the wireless client
- What should I do when the Omada Software Controller (V4) fails to discover the devices?
- Common questions about TP-Link EAP device when it’s used in home network
- Frequently Asked Questions about EAP Mesh Network
- What is Fast Roaming of TP-Link Business Wi-Fi Products?
- Getting started without an Omada Controller
- How to configure Management VLANs for Omada Switches and APs (for SOHO scenario)
- How to configure Management VLANs for Omada Switches and APs (for Business scenario)
- Basic introduction to AP Mesh and Fast Roaming
- Why my clients don't roam or connect to the nearest AP
- Troubleshooting for Wireless Client Cannot Access the Internet
- How to use Bonjour Related Functions of Omada AP on Omada Controller
- How to configure Lock to AP on Omada Controller
- How to Configure SSID & Client Rate Limit on Omada Controller
- Unable to connect to EAP WiFi
- How to Build a Mesh Network via Omada EAP in Controller Mode
- How to Configure your Omada EAP into a Mesh Network Using the Omada App
- How to optimize wireless performance of EAP products
- Announcement on Discontinuation of Facebook Wi-Fi
- Using Omada controller to configure multiple SSIDs with different VLANs on TP-Link Omada EAPs and Switches to work with a non-Omada gateway(Multi-Net NAT supported)
- How to Manage Omada Devices at Different Sites Using Omada SDN Controller via Port Forwarding (Controller 5.0 or Above)
- How to Manage Omada Devices at Different Sites Using Omada SDN Controller via VPN (Controller 5.0 or Above)
- What is 2FA and how to use it in Omada platform
- How to Configure Portal Authentication on Omada Controller
- How to configure Management VLAN in Standalone mode for EAP
- How to configure MAC filtering for EAP in Controller mode
- Configuration Guide on EAP-TLS authentication for WPA-Enterprise (with FreeRADIUS)
- How to Configure Voucher Authentication on Omada Controller
- How to configure the WLAN Group function on the SDN Controller(New UI)
- How to disable 5GHz WiFi for Omada EAP
- How to configure basic wireless settings of my TP-Link EAP in Standalone mode?
- How to configure basic wireless settings of my TP-Link EAP via Omada Controller?
Firmware
A firmware update can resolve issues that the previous firmware version may have and improve its current performance.
To Upgrade
IMPORTANT: To prevent upgrade failures, please read the following before proceeding with the upgrade process
- Please upgrade firmware from the local TP-Link official website of the purchase location for your TP-Link device, otherwise it will be against the warranty. Please click here to change site if necessary.
- Please verify the hardware version of your device for the firmware version. Wrong firmware upgrade may damage your device and void the warranty. （Normally V1.x=V1）
How to find the hardware version on a TP-Link device - Do NOT turn off the power during the upgrade process, as it may cause permanent damage to the product.
- To avoid wireless disconnect issue during firmware upgrade process, it's recommended to upload firmware with wired connection unless there is no LAN/Ethernet port on your TP-Link device.
- It's recommended that users stop all Internet applications on the computer, or simply disconnect Internet line from the device before the upgrade.
- Use decompression software such as WinZIP or WinRAR to extract the file you download before the upgrade.
|
EAP620 HD(US)_V3_1.1.0 Build 20221222 |
Download | |
|---|---|---|
| Tanggal Publikasi: 2023-01-18 | Bahasa: Inggris | Ukuran File: 15.17 MB |
|
This firmware fully adapts the Omada SDN Controller v5 but only compatible with Omada Controller v4.1.5 or above. |
||
To Use Third Party Firmware In TP-Link Products
Some official firmware of TP-Link products can be replaced by the third party firmware such as DD-WRT. TP-Link is not obligated to provide any maintenance or support for it, and does not guarantee the performance and stability of third party firmware. Damage to the product as a result of using third party firmware will void the product's warranty.
Open Source Code For Programmers (GPL)
Please note: The products of TP-Link partly contain software code developed by third parties, including software code subject to the GNU General Public Licence (“GPL“), Version 1/Version 2/Version 3 or GNU Lesser General Public License ("LGPL"). You may use the respective software condition to following the GPL licence terms.
You can review, print and download the respective GPL licence terms here. You receive the GPL source codes of the respective software used in TP-Link products for direct download and further information, including a list of TP-Link software that contain GPL software code under GPL Code Center.
The respective programs are distributed WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the respective GNU General Public License for more details.
Apps
- Omada APP
TP-Link Omada lets you configure settings, monitor network status and manage clients, all from the convenience of a smart phone or tablet. Learn more about Compatible Devices.
Note: SDN switch/router is compatible with Omada App only in controller mode. To use Omada, please update your device's firmware to the latest version.
Emulators
Versi Firmware |
Working Mode |
Bahasa |
|
|---|---|---|---|
20220119(US) |
- |
Inggris |
Catatan:
1. Emulator ini adalah virtual web GUI dimana Anda dapat memprogram firmware produk TP-Link Anda. Untuk rincian tentang fitur dan spesifikasi produk bisa menggunakan fasilitas pencarian dan pergi ke halaman produk.
2. Periksa versi firmware sesuai dengan versi ditampilkan pada antarmuka Emulator. Setiap firmware versi memiliki GUI dan fungsionalitas.
3. Harap dicatat bahwa tidak semua versi firmware yang terwakili di Emulator.