Descarga para RE600X V3

Por favor, elija la versión de hardware:


>Cómo encontrar la versión de hardware en un dispositivo de TP-Link

IMPORTANTE : la disponibilidad del modelo y la versión de hardware varía según la región. Consulte su sitio web regional de TP-Link para determinar la disponibilidad del producto.
Visión General

Vídeo de configuración

  • How to Configure a Range Extender for Starlink

  • Configure el extensor de rango TP-Link a través del botón WPS (RE500X, etc.)

  • Cómo configurar el extensor de rango TP Link a través de la aplicación Tether (RE650, etc.)

  • How to set up a TP-Link Range Extender(No music)

  • How to set up a TP-Link Range Extender

Preguntas Frecuentes


A firmware update can resolve issues that the previous firmware version may have and improve its current performance.

To Upgrade

IMPORTANT: To prevent upgrade failures, please read the following before proceeding with the upgrade process

  • Please upgrade firmware from the local TP-Link official website of the purchase location for your TP-Link device, otherwise it will be against the warranty. Please click here to change site if necessary.
  • Please verify the hardware version of your device for the firmware version. Wrong firmware upgrade may damage your device and void the warranty. (Normally V1.x=V1)
    Cómo encontrar la versión de hardware en un dispositivo de TP-Link
  • Do NOT turn off the power during the upgrade process, as it may cause permanent damage to the product.
  • To avoid wireless disconnect issue during firmware upgrade process, it's recommended to upload firmware with wired connection unless there is no LAN/Ethernet port on your TP-Link device.
  • It's recommended that users stop all Internet applications on the computer, or simply disconnect Internet line from the device before the upgrade.
  • Use decompression software such as WinZIP or WinRAR to extract the file you download before the upgrade.

RE600X(EU)_V3_1.1.0 Build 20230418

Fecha de Publicación: 2023-07-12 Idioma: Multi lenguaje Tamaño de Archivo: 19.23 MB

1. Enhanced the system stability;
2. After upgrading to this new 1.1.0 firmware, we cannot be downgraded back to the older 1.0.x version firmware.

RE600X(EU)_V3_1.1.4 Build 20230509

Fecha de Publicación: 2023-06-30 Idioma: Multi lenguaje Tamaño de Archivo: 20.11 MB

1. After upgrading to this new 1.1.4 firmware, we cannot be downgraded back to the older 1.0.x version firmware;
2. Optimized the networking configuration process;
3. Optimized the web management page display;
4. Enhanced WiFi stability and performance in some cases.

RE600X(EU)_V3_1.0.9 Build 20221108

Fecha de Publicación: 2022-12-19 Idioma: Multi lenguaje Tamaño de Archivo: 19.88 MB

1. Newly support EasyMesh;
2. Enhanced WiFi stability;
3. Optimized the system stability.

To Use Third Party Firmware In TP-Link Products

Some official firmware of TP-Link products can be replaced by the third party firmware such as DD-WRT. TP-Link is not obligated to provide any maintenance or support for it, and does not guarantee the performance and stability of third party firmware. Damage to the product as a result of using third party firmware will void the product's warranty.

Open Source Code For Programmers (GPL)

Please note: The products of TP-Link partly contain software code developed by third parties, including software code subject to the GNU General Public Licence (“GPL“), Version 1/Version 2/Version 3 or GNU Lesser General Public License ("LGPL"). You may use the respective software condition to following the GPL licence terms.

You can review, print and download the respective GPL licence terms here. You receive the GPL source codes of the respective software used in TP-Link products for direct download and further information, including a list of TP-Link software that contain GPL software code under GPL Code Center.

The respective programs are distributed WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the respective GNU General Public License for more details.


TP-Link Tether

La App TP-Link Tether es la forma más sencilla configurar y gestionar tu red desde móviles iOS o Android. Más información TP-Link Tether y Modelos Compabiles

Nota: Para utilizar Tether, actualiza el firmware de tu dispositivo TP-Link a la última versión.

De United States?

Obtener productos, eventos y servicios para su región.