You may refer to the video first.
The web-based management page of TP-Link routers is a built-in internal web server that does not require internet access. It does however require your device to be connected to the TP-Link router. This connection can be wired or wireless, so you can log into the management page from the desktop computer, phone, tablet, iPad, etc.
Note: Low version of your web browser may cause compatibility problems with the web-based interface(management page) of your device, such as being unable to log into the interface, displaying incomplete features, etc.
Choose either of your connection type (Wired or Wireless)
Step1a: If Wireless, find the wireless network (named TP-LINK_xxxxxx by default which is printed on the label of the router) from the WiFi list on your device and connect it with the wireless password (default password is printed on the router's label as well).
Step1b: If Wired, connect your device via Ethernet cable to one of the LAN ports on the back of your TP-Link router.
Launch a web browser, and enter http://tplinkwifi.net or http://192.168.0.1 in the address bar.
Note: The default access address differs by model. Please find it on the bottom label of the product.
There are two types of login pages that pop up, you may pick them up according to your devices.
Note: If the login window does not appear, please try the following troubleshooting:
a. Reboot your router and try again.
b. If the computer is set to a static IP address, change its settings to obtain an IP address automatically.
c. Verify that http://tplinkwifi.net is correctly entered in the web browser. Alternatively, enter http://192.168.0.1 or http://192.168.1.1 in the web browser and press Enter.
d. Use another web browser and try again.
e. Disable and enable the network adapter being used
Type 1: You need to create any login password that you want.
Type 2: It requires the username and password, both of them are ''admin'' which is labeled on the bottom of your router.
Note: If you forgot your username or password to log in, please find the reset button/hole and reset it to the factory default settings.
To get to know more details of each function and configuration please go to Download Center to download the manual of your product.