How to configure EAP610-Outdoor in RE mode

User Application Requirement
Updated 06-27-2023 03:35:26 AM 18472
This Article Applies to: 

EAP610-Outdoor can be configured as RE (Repeater) from firmware 1.1.3 Build 20230330. This article introduces two methods of the RE mode configuration.

Note: before RE mode configuration, please make sure your device is in factory default.

Method One. Via Standalone management page

1. Get your PC and EAP610-Outdoor in one subnet and login to EAP standalone management page via EAP’s IP address.

2. Set up a new account then choose to enter RE mode.

3. Choose your preferred band, click Scan button to find available SSID to join and repeat signal.

4. Join the target SSID then customize repeater SSID of EAP610-Outdoor.

5. Finish setup and enjoy Wi-Fi with the extended coverage.

Method Two. Via Omada APP

1. Get your wireless device connected to default SSID of EAP610-Outdoor, open Omada APP, go to Standalone APs page and click the EAP610-Outdoor.

2. Set up a new account then choose to enter RE mode.

3. Choose your preferred band, click SSID item in the below to start scanning to find and join available SSID for repeating.

4. Customize repeater SSID of EAP610-Outdoor.

5. Finish setup and enjoy Wi-Fi with the extended coverage.

Is this faq useful?

Your feedback helps improve this site.

Community

TP-Link Community

Still need help? Search for answers, ask questions, and get help from TP-Link experts and other users around the world.

Visit the Community >

From United States?

Get products, events and services for your region.