RE615X
NewAX1800 Wi-Fi Range Extender
- Up to 1.8 Gbps Dual Band Wi-Fi: Separates 5 GHz (1201 Mbps) and 2.4 GHz (574 Mbps) WiFi bands for faster speeds and greater capacity with the WiFi 6 technology.†
- Smart Roaming: Walk from room to room and stay connected with the fastest possible speeds.§
- EasyMesh-Compatible: Flexibly creates a Mesh network by connecting to an EasyMesh-compatible router for seamless whole-home coverage.◇
- Gigabit Ethernet Port: Provides faster wired connections to smart TVs, computers and gaming consoles.
- AP Mode: Create a new WiFi access point through the Gigabit Ethernet port to enhance your wired network with WiFi capability.
- Easy Setup: Plug in and then easily set up via a press of the WPS button or via the Tether App.
- Ultimate Compatibility: Extends the range of any Wi-Fi router or wireless access point.*
Expand Your Ultimate
WiFi Experience
AX1800 WiFi 6 Range Extender
RE615X
1 Gigabit
Ethernet Port
AX1800
Fast WiFi
1201 Mbps
5 GHz 574 Mbps
2.4 GHz
Works with any WiFi router
EasyMesh
Compatible
Dual Band
MU-MIMO
One-Touch Connection
Life in the fast lane with advanced WiFi6
WiFi 6 comes with it all: faster speeds, lower latency, and more connections. It also features 25% faster data throughput compared with last-gen WiFi thanks to 1024-QAM. With this speed boost, experience high-speed and stable WiFi throughout your rooms.
1201 Mbps
574 MbpsHigh-Performance Amplifiers
Cover Everywhere with Existing Router
Enjoy fluent streaming and gaming in whatever room you’re in thanks to RE615X’s amplifiers. Whether you’re sharing a pad with friends or living in your forever home, RE615X sends out strong signals to those hard-to-cover areas.
OFDMA
More efficient data.
Orthogonal Frequency Division Multiple Access helps integrate the data of different end devices for higher efficiency.
WiFi 6
OFDMA
Data Transmitted
WiFi 5
OFDM
Data Transmitted
Beamforming
Strong, targeted WiFi.
Find the direction of your phone or laptop, and accelerate your signal strength.
Beamforming
None
Wide.
Wider.
Widest.
Keep your internet focused on a single room or blanket an entire floor with WiFi by picking between 3 strength levels on the Tether app.
EasyMesh—Flexibly Create Whole Home Mesh WiFi
RE615X is EasyMesh-compatible. If you have any dead zones at home, just add another EasyMesh router/range extender to further form your whole home multi-gigabit mesh WiFi. No more searching for a stable connection.*
-
WiFi Dead Zone Killer
Eliminate weak signal areas with WiFi coverage for the whole house
-
Smart Roaming
Uninterrupted streaming when moving around your home
-
One WiFi Name
No more switching WiFi network names
-
EasyMesh Devices
(Router + Range Extender) -
Traditional Router
with Extender Wi-Fi
Gigabit Connectivity, 10× Faster
With one Gigabit LAN ports, speeds can be up to 10× faster
than standard Ethernet connections.§ Connect your
favorite wired devices to RE615X and get impressed!
Gigabit Ethernet Port
-
Desktop
-
4K HDTV
-
Computer
Effortless One-Touch Setup
Press the WPS button on your router and extender to expand your WiFi coverage in seconds.
Step 1:
Press the WPS button on your router and the RE615X.
Step 2:
Relocate the RE615X to the best place with smart signal indicator.
Step 3:
Multicolor LED helps you find the right location for your range extender for the best WiFi extension.
Good connection
Too far away from the host Router
Built-In Access Point Mode
RE615X is more than a wireless range extender. Simply plug an Ethernet cable into its Ethernet port, and easily turn your wired internet connection into a 2×2 MU-MIMO dual band wireless access point.
Control at Your Fingertips
Set up and manage your WiFi through the TP-Link Tether app from your phone (Android, iOS), including TP-Link routers and range extenders.
- 1Power Indicator
- 2Signal indicator
- 32.4 GHz Indicator
- 45 GHz Indicator
- 5Reset
- 6WPS Button
- 7Gigabit Port
| HARDWARE FEATURES | |
|---|---|
| Ports | 1 Gigabit Ethernet Port |
| Button | • WPS Button• Reset Button |
| Input Power | 100-240V~50/60Hz |
| Power Consumption | 15.2W |
| Dimensions ( W x D x H ) | 107×40×160 mm |
| Antenna | 2 External Antennas |
| WIRELESS FEATURES | |
|---|---|
| Wireless Standards | • IEEE 802.11a/n/ac/ax 5GHz• IEEE 802.11b/g/n/ax 2.4GHz |
| Frequency | 2.4 GHz and 5 GHz |
| Signal Rate | • 574 Mbps on 2.4GHz• 1201 Mbps on 5GHz |
| Working Modes | Range Extender / Access Point |
| Reception Sensitivity | 5GHz: 11a 6Mbps:-97dBm11a 54Mbps:-78dBm11ac HT20 MCS8:-74dBm11ac HT40 MCS9:-69dBm11ac HT80 MCS9:-65dBm11ax HE20 MCS0: -97dBm11ax HE20 MCS11: -66dBm11ax HE40 MCS0: -94dBm11ax HE40 MCS11: -63dBm11ax HE80 MCS0: -91dBm11ax HE80 MCS11: -60dBm 2.4GHz: 11g 6Mbps:-96dBm11g 54Mbps:-78dBm11n HT20 MCS7:-76dBm11n HT40 MCS7:-72dBm11ax HE20 MCS0: -95dBm11ax HE20 MCS11: -65dBm11ax HE40 MCS0: -93dBm11ax HE40 MCS11: -62dBm |
| Wireless Functions | • Enable/Disable Wireless Radio• DFS (the latest firmware and hardware version is required)• Access Control• LED Control• Power Schedule• Wi-Fi Coverage Adjustment |
| Wireless Security | • WEP• WPA• WPA2• WPA3 |
| Transmission Power | • 2.4 GHz ≤ 16 dBm• 5 GHz ≤ 21 dBm |
| Mesh Technology | EasyMesh-Compatible◇ |
| OTHERS | |
|---|---|
| Certification | RoHS |
| Package Contents | • Wi-Fi Range Extender RE615X • Quick Installation Guide |
| System Requirements | Microsoft Windows 98SE, NT, 2000, XP, Vista™ or Windows 7, 8, 8.1, 10, MAC OS, NetWare, UNIX or Linux Internet Explorer 11, Firefox 12.0, Chrome 20.0, Safari 4.0, or other Java-enabled browser |
| Environment | • Operating Temperature: 0℃~40℃ (32℉ ~104℉)• Storage Temperature: -40℃~70℃ (-40℉ ~158℉)• Operating Humidity: 10%~90% non-condensing• Storage Humidity: 5%~90% non-condensing |
†Maximum wireless signal rates are the physical rates derived from IEEE Standard 802.11 specifications. Actual wireless data throughput and wireless coverage are not guaranteed and will vary as a result of network conditions, client limitations, and environmental factors, including building materials, obstacles, volume and density of traffic, and client location.
‡Use of Wi-Fi 6 (802.11ax), and features including OFDMA, 1024-QAM, MU-MIMO requires clients to also support the corresponding features.
§Smart Roaming is designed for devices that support the 802.11k/v standard.
◇TP-Link EasyMesh-compatible products can network with other devices that use EasyMesh. Failed connections may be due to firmware conflicts of different vendors. The EasyMesh-compatible function is still being developed on some models and will be supported in subsequent software updates.
△The maximum capacity is the maximum number of signals that can be connected under ideal conditions, and the specific situation varies with the location of the RE, the type of connected equipment, etc.
*The product may not be compatible with routers or gateways with firmware that has been altered, based on open source programs, or is non-standard or outdated.
Actual network speed may be limited by the rate of the product's Ethernet WAN or LAN port, the rate supported by the network cable, Internet service provider factors and other environmental conditions.