Descarga para VIGI NVR1008H
>¿Cómo encontrar la versión del hardware en un dispositivo TP-Link?
- Product Overview
VIGI Config Tool
VIGI Configuration Tools V1.1.4 |
Descargas | |
---|---|---|
Fecha de Publicación : 2024-06-19 | Idioma: Inglés | Tamaño del Archivo : 282.87 MB |
Sistema de Operación : Windows 7/8/8.1/10 |
||
1. Updates the Open Source Software Statement. |
Setup Video
-
Introduction to Install VIGI Products and Overview of Three Management Methods
This video shows how to install VIGI products and introduces three management methods. VIGI products are easy to be installed, and with three management methods, you can customize the management systems to suit your specific needs.
More Fold -
How to Setup Tapo Wireless Camera with VIGI NVR
00:00 - Introduction 00:08 - Connection Diagram 00:13 - Setting up the Tapo camera ONVIF account 00:37 - Adding the Tapo camera in the VIGI NVR 02:36 - Fix Tapo camera IP address on router 03:00 - Controlling the Tapo camera from the NVR
More Fold -
How to Manage VIGI Cameras and NVRs Using VIGI Security Manager
This video demonstrates how to manage VIGI cameras and NVRs using VIGI Security Manager in two scenarios: • using VIGI Security Manager in your local network • using VIGI Security Manager remotely THIS VIDEO APPLIES TO: All VIGI Cameras and NVRs
More Fold -
How to Manage VIGI Cameras via VIGI NVR
This video demonstrates how to manage VIGI cameras via VIGI NVR. It consists of three steps: • Connect the hardware. • Set up VIGI NVR and add VIGI cameras. • Bind VIGI NVR to TP-Link ID for remote management. THIS VIDEO APPLIES TO: • All VIGI Products
More Fold -
How to Manage VIGI Cameras and NVRs via VIGI App
This video demonstrates how to manage VIGI cameras and NVRs via the VIGI app. It consists of three steps: • Launch the VIGI app. • Add devices using the VIGI app. • View the recordings and configure the settings. • Enable alerts to get instant alerts This video applies to: • All VIGI VIGI Cameras and NVRs
More Fold
Preguntas Frecuentes
- How to migrate devices from VIGI app (Personal Edition) to VIGI Cloud VMS
- How to view VIGI devices on VIGI App and VIGI Cloud VMS
- How to use recovery mode to recover firmware for VIGI Camera and NVR
- How to set up record and playback on the computer via VIGI Security Manager
- How Can I View 24-hour Recordings of VIGI Cameras?
- How to choose a suitable HDD for VIGI NVR
- What should I do if I forgot the password of VIGI NVR
- How to upgrade the firmware of VIGI NVR
- How to reset VIGI NVR to factory defaults
- How to change the password and Reset Password Email of the VIGI NVR
- Common questions about VIGI
- How to Share Your VIGI Devices with Your Families and Employees
- How to get started with the TP-Link VIGI app
- How to avoid IP address conflicts in a surveillance system
Firmware
A firmware update can resolve issues that the previous firmware version may have and improve its current performance.
To Upgrade
IMPORTANT: To prevent upgrade failures, please read the following before proceeding with the upgrade process
- Please upgrade firmware from the local TP-Link official website of the purchase location for your TP-Link device, otherwise it will be against the warranty. Please click here to change site if necessary.
- Please verify the hardware version of your device for the firmware version. Wrong firmware upgrade may damage your device and void the warranty. (Normally V1.x=V1)
¿Cómo encontrar la versión del hardware en un dispositivo TP-Link? - Do NOT turn off the power during the upgrade process, as it may cause permanent damage to the product.
- To avoid wireless disconnect issue during firmware upgrade process, it's recommended to upload firmware with wired connection unless there is no LAN/Ethernet port on your TP-Link device.
- It's recommended that users stop all Internet applications on the computer, or simply disconnect Internet line from the device before the upgrade.
- Use decompression software such as WinZIP or WinRAR to extract the file you download before the upgrade.
VIGI NVR1008H(UN)_V2_210721 |
Descargas | |
---|---|---|
Fecha de Publicación : 2021-09-03 | Idioma: Multi-language | Tamaño del Archivo : 14.73 MB |
First firmware released for VIGI NVR1008H(UN) 2.0 Notes: |
Usar Firmware de Terceros en los Productos de TP-Link
Algunos firmware oficiales de los productos de TP-Link pueden ser sustituidos por el firmware de terceros como DD-WRT. TP-Link no está obligado a proporcionar el mantenimiento o soporte alguno para los mismos, y no garantiza el desempeño y la estabilidad del firmware de terceros. Los daños al producto como resultado del uso de firmware de terceros, anulará la garantía del producto.
Abrir el Código Fuente Para Programadores (GPL)
La siguiente información es para los programadores y no es necesaria para la mayoría de los usuarios particulares de TP-Link.
Los productos de TP-Link contienen en parte del código del software desarrollado por terceros, incluyendo el código del software sujeto a “GLP” (General Public Licence - Licencia Pública General) de GNU, Versión 1/Versión 2/Versión 3 o "LGPL" (Lesser General Public License – Licencia Pública General Reducida) de GNU. Puede usar la condición del software respectiva siguiendo los términos de la licencia de GPL.
Puede revisar, imprimir y descargar los términos respectivos de la licencia de GPL aquí. Usted recibe los códigos fuente de GPL del respectivo software utilizado en los productos de TP-Link para la descarga directa e información adicional, incluyendo una lista del software de TP-Link que contiene el código del software de GPL por el Centro de Códigos de GPL.
Los programas respectivos son distribuidos SIN NINGUNA GARANTÍA, incluso sin la garantía implícita de COMERCIABILIDAD o IDONEIDAD PARA UN PROPÓSITO PARTICULAR. Vea la Licencia Pública General respectiva de GNU para obtener más detalles.
Apps
![](https://static.tp-link.com/res/style/images/app-vigi.png)
- VIGI App
TP-Link VIGI allows you to easily add, configure, monitor, and control your VIGI devices.
Emulators
Versión de Firmware |
Modo de trabajo |
Idioma |
|
---|---|---|---|
VIGI NVR-20221209 |
- |
Inglés |
Note:
1. This Emulator is a virtual web GUI where you can program your TP-Link product firmware. For details about an individual product’s features and specifications please use the search facility and go to the product page.
2. Please check the firmware version corresponds to the version shown on the Emulator interface. Each firmware version has its own GUI and functionality.
3. Please note that not all firmware versions are represented on the Emulator.