Descarga para OC200
Setup Video
-
How to configure Omada Hardware Controller via Omada App
This videos shows how you to set up the Omada Hardware Controller (OC200 is used as an example) via Omada app locally and remotely.
More Fold -
How to configure Omada Hardware Controller via a Web Browser
This videos shows how you to set up the Omada Hardware Controller (OC200 is used as an example) via a web browser locally and remotely.
More Fold -
How to Choose an Omada SDN Controller
This video will show you how to choose an Omada SDN Controller and its management interface.
More Fold -
How to Set Up the Whole Network of Gateway, Switches, and EAPs Using Omada SDN Controller
This video will demonstration how to do a full configuration with TP-Link Omada products including gateway, switches and EAPs. As an example, we are going to build the wired and wireless networks from scratch at our TP-Link Office. The setup consists of 7 steps: Step 1. Log in to the Controller Step 2. Adopt Devices Step 3. View Dashboard and Menus Step 4. Set up WAN Step 5. Set up LAN and VLANs Step 6. Set up Wi-Fi Step 7. Set up ACL
More Fold -
How to setup the Omada Hardware Controller (OC200/OC300) via web browser
This video will demonstrate how to set up OC200/OC300 via web browser. The setup consists of four steps: • Connect the controller to your local network. • Log in with your TP-Link ID. • Add the controller to your TP-Link ID. • Set up the controller THIS VIDEO APPLIES TO: • All TP-Link EAP models (except EAP120 and EAP220) • Omada Hardware Controller (OC200/OC300) • Mass EAPs (usually more than three)
More Fold -
How to setup the Omada Hardware Controller (OC200/OC300) via your mobile phone
This video will demonstrate how to set up OC200/OC300 via your mobile phone. The setup consists of four steps: • Connect the controller to your local network. • Log in with your TP-Link ID. • Add the controller to your TP-Link ID. • Set up the controller THIS VIDEO APPLIES TO: • All TP-Link EAP models (except EAP120 and EAP220) • Omada Hardware Controller (OC200/OC300) • Mass EAPs (usually more than three)
More Fold -
A Quick Overview of EAP Management Methods
This video introduces how to choose the optimum method to manage TP-Link EAPs in your scenario.
Here are 3 most common scenarios and their corresponding methods:
• Manage 1 or 2 EAPs locally
• Manage 3 or more EAPs locally
• Manage 3 or more EAPs remotely
When choosing the method, consider the following questions:
1. Standalone Mode or Controller Mode?
2. In Controller mode, what kind of controller will you use, an OC200 or a PC with Omada Software Controller?
3. What kind of user interface will you use, a web browser or the Omada app?
More Fold
Preguntas Frecuentes
- How to use encrypted SMTP Server on Omada SDN Controller
- How to migrate Omada Controller with the Migration feature
- API and Code Sample for External Portal Server (Omada Controller 5.0.15 or above)
- Announcement on Discontinuation of Facebook Wi-Fi
- How to upgrade or downgrade the firmware of Omada Controller
- API and Code Sample for RADIUS Server with External Web Portal (Omada Controller 4.1.5 or above)
- How to get a backup file on Omada Hardware/Software/Cloud-Based Controller above V5.8
- The differences and commons of three Omada Controllers
- Omada Cloud’s Domain Names
- CLI Configuration Guide for Omada SDN Controller (v5.9.9 and above)
- How to enable Cloud Access on Omada SDN controller
- API and Code Sample for External Portal Server (Omada Controller 2.6.0 to 3.2.17)
- API and Code Sample for RADIUS Server with External Web Portal (Omada Controller 3.0.5 or below)
- Statement on Spring Framework RCE Vulnerability(For Omada Software Controller)
- How to Manage Omada Devices at Different Sites Using Omada SDN Controller via Port Forwarding (Controller 5.0 or Above)
- How to Manage Omada Devices at Different Sites Using Omada SDN Controller via VPN (Controller 5.0 or Above)
- Configuration Guide on Dynamic VLAN with the VLAN Assignment function of RADIUS
- How to set Access Control to create guest SSID on Omada Controller/EAP
- Should I Keep the Omada Controller Running After Configuration?
- Do I Need to Keep Omada Controller Running When Using Portal Authentication?
- How to go through Set-up Wizard when Starting Omada SDN controller
- PPSK Configuration Guide
- Configuration Guide on EAP-TLS authentication for WPA-Enterprise (with FreeRADIUS)
- How to configure Management VLAN in Omada SDN Controller (4.4.4 or above)
- How to add an Omada Gateway to the network?(Controller 4.3.5 or below)
- How to Configure Voucher Authentication on Omada Controller
- How to add an Omada Gateway to the network? (Controller 4.4.3 or above)
- How to manage EAPs in different subnets using Omada controller (via EAP Discover Utility) (Old UI)
- How to manage EAPs in different subnets using Omada Controller (via DHCP option 138) (Old UI)
- How to manage EAPs at different sites across Internet using Omada Controller (via VPN Tunnel with EAP Discover Utility) (Old UI)
- How to manage EAPs at different sites across Internet using Omada Controller (via NAT Port Forwarding for Controller Host with EAP Discover Utility) (Old UI)
- How to manage EAPs at different sites across Internet using Omada Controller (via NAT Port Forwarding for Controller Host with DHCP Option138) (Old UI)
- How to manage EAPs in different VLANs using Omada Controller (Old UI)
- How to Configure Band Steering on TP-Link Omada Controller
- How to Configure Load Balance on Omada Controller
- How to Configure Reboot schedule and Wi-Fi Scheduler function of Omada Controller
- How to migrate the configuration files from Omada Software Controller into OC200
- What to do if you cannot find the page of Omada SDN Controller
- How to use the Recovery Mode to recover the firmware for Omada Hardware Controller
- What to do if you get an alert of “The number of logs is up to the limit”
- How to preconfigure WAN settings on Omada Controller (v5 or above)
- How to configure the WLAN Group function on the SDN Controller(New UI)
- How to set the PVID/VLAN ID for the second port on the EAP
- How to disable 5GHz WiFi for Omada EAP
- How to convert SSL certificate format using OpenSSL(For Omada SDN Controller)
- How to Add Omada Devices to Omada Cloud-Based Controller
- How to configure the WLAN Group function on Omada Controller (V3 or below version)
- Why we need to configure mail server on Omada SDN controller before adding cloud user and email log
- What Should I Do if Omada Software Controller OC200 Cannot Adopt Omada EAP
- Which ports do Omada Controller and EAP Discovery Utility use?
- How to import your customized portal web page to Omada Controller
- How to correctly Delete All Events log on Omada Controller
- How to Build a Mesh Network via Omada EAP in Your Home
- Frequently Asked Questions about EAP Mesh Network
- How to configure URL blacklist or whitelist using Omada Controller's URL Filtering feature
- VLAN configurations of the LAN ports on Omada Gateway in Controller mode
- How to configure Multiple SSIDs with Multiple Subnets on EAP products
- Q&A for TP-Link Omada App
- How to back up and restore the configuration and data of your Software Controller (or OC200)
- Guidance and precautions for the upgrade and data migration of Omada Controller/OC200
- How to Configure Omada Controller as a Windows Service(above Controller 2.5.4)
- Frequently asked questions of Omada SDN solution related to upgrading and management
- Why my Omada controller cannot manage the latest EAP?
- Configure rogue AP detection on EAP/Omada Controller