Descarga para TL-R600VPN V4

Elige una versión de hardware:

V4

>¿Cómo encontrar la versión del hardware en un dispositivo TP-Link?

IMPORTANT: Model and hardware version availability varies by region. Please refer to your TP-Link regional website to determine product availability.
Product Overview

Preguntas Frecuentes

Firmware

A firmware update can resolve issues that the previous firmware version may have and improve its current performance.

To Upgrade

IMPORTANT: To prevent upgrade failures, please read the following before proceeding with the upgrade process

  • Please upgrade firmware from the local TP-Link official website of the purchase location for your TP-Link device, otherwise it will be against the warranty. Please click here to change site if necessary.
  • Please verify the hardware version of your device for the firmware version. Wrong firmware upgrade may damage your device and void the warranty. (Normally V1.x=V1)
    ¿Cómo encontrar la versión del hardware en un dispositivo TP-Link?
  • Do NOT turn off the power during the upgrade process, as it may cause permanent damage to the product.
  • To avoid wireless disconnect issue during firmware upgrade process, it's recommended to upload firmware with wired connection unless there is no LAN/Ethernet port on your TP-Link device.
  • It's recommended that users stop all Internet applications on the computer, or simply disconnect Internet line from the device before the upgrade.
  • Use decompression software such as WinZIP or WinRAR to extract the file you download before the upgrade.

TL-R600VPN(UN)_v4_20180530

Descargas
Fecha de Publicación : 2018-06-28 Idioma: Inglés Tamaño del Archivo : 9.93 MB

Modifications and Bug Fixes:
1. Fix DHCP server will hang when modifying it after assigning IP to clients with the same name;
2. Enhance the Firewall module for VPN;
3. Fix bugs that it cannot establish L2TP over IPsec VPN connection when NAT exists;
4. Enhanced contents of System Log module;
5. Improve Dynamic DNS could create multi domain entries for one account;
6. Enhance the stability and speed up the dial process of WAN;
7. Add multi WANs selection for NAT/Policy Routing/primary WAN of Link Backup;
8. Add Only, Priority two modes for Policy Routing feature;
9. Add two sub-modes of Failover mode for Link Backup feature;
10. IP-MAC Binding entries will no longer take effect when ARP Spoofing Defense is disabled. 
Notes:
For TL-R600VPN V4.0

TL-R600VPN(UN)_V4_20180126

Descargas
Fecha de Publicación : 2018-02-28 Idioma: Inglés Tamaño del Archivo : 9.90 MB

Modifications and Bug Fixes
1. Fix the problem of static routing can't work via LAN interface.
2. Fix the DNS or routing table problem when using the Link Backup.
3. Fix the problem of traffic can't be transfered from LAN to WAN after changing LAN IP and rebooting router.
4. Fix the problem of L2TP over IPSec VPN might be down when transmitting large files via VPN tunnel.
5. Fix the problem of Save button may fail when using remote control. 
6. Fix the problem of WAN1 traffic statistics can't work when the IPTV enabled.
7. Enhanced the stability of the router.
8. Reduce the time from WAN interface get IP to get to the internet.
9. Add the function of importing all at the page of ARP scaning.
10. Add conflict detection between VPN pool and DHCP pool;

TL-R600VPN(UN)_V4_20171128

Descargas
Fecha de Publicación : 2018-01-05 Idioma: Inglés Tamaño del Archivo : 9.89 MB

Modifications and Bug Fixes:

1.Enhanced the performance of throughput.
2.Fixed the security hole of zero-day flaws and dnsmasq;
3.Added the conflict detection mechanism of IPSec VPN Local Subnet and Remote Subnet;
4. Enhanced the function of Virtual Server;
5. Enhanced the stability of L2TP over IPSec VPN;
6. The illegal NTP server will not be saved.

Usar Firmware de Terceros en los Productos de TP-Link

 

Algunos firmware oficiales de los productos de TP-Link pueden ser sustituidos por el firmware de terceros como DD-WRT. TP-Link no está obligado a proporcionar el mantenimiento o soporte alguno para los mismos, y no garantiza el desempeño y la estabilidad del firmware de terceros. Los daños al producto como resultado del uso de firmware de terceros, anulará la garantía del producto.

 

Abrir el Código Fuente Para Programadores (GPL)

 

La siguiente información es para los programadores y no es necesaria para la mayoría de los usuarios particulares de TP-Link.

 

Los productos de TP-Link contienen en parte del código del software desarrollado por terceros, incluyendo el código del software sujeto a “GLP” (General Public Licence - Licencia Pública General) de GNU, Versión 1/Versión 2/Versión 3 o "LGPL" (Lesser General Public License – Licencia Pública General Reducida) de GNU. Puede usar la condición del software respectiva siguiendo los términos de la licencia de GPL.

 

Puede revisar, imprimir y descargar los términos respectivos de la licencia de GPL aquí. Usted recibe los códigos fuente de GPL del respectivo software utilizado en los productos de TP-Link para la descarga directa e información adicional, incluyendo una lista del software de TP-Link que contiene el código del software de GPL por el Centro de Códigos de GPL.

 

Los programas respectivos son distribuidos SIN NINGUNA GARANTÍA, incluso sin la garantía implícita de COMERCIABILIDAD o IDONEIDAD PARA UN PROPÓSITO PARTICULAR. Vea la Licencia Pública General respectiva de GNU para obtener más detalles.

  

Emulators

Versión de Firmware
Working Mode
Idioma
171128
-
Inglés

Note:

1. This Emulator is a virtual web GUI where you can program your TP-Link product firmware. For details about an individual product’s features and specifications please use the search facility and go to the product page.

2. Please check the firmware version corresponds to the version shown on the Emulator interface. Each firmware version has its own GUI and functionality.

3. Please note that not all firmware versions are represented on the Emulator.

From United States?

Get products, events and services for your region.