Descarga para EAP330
>¿Cómo encontrar la versión del hardware en un dispositivo TP-Link?
Controller Software
The EAP Controller is used to manage multiple EAPs intensively.
|
Omada_Controller_V3.2.10_linux_x64_deb |
Descargas | |
|---|---|---|
| Fecha de Publicación : 2020-04-20 | Idioma: Inglés | Tamaño del Archivo : 99.4MB |
Sistema de Operación : Ubuntu 14.04/16.04/17.04/18.04/Debian 9.8 |
||
|
Omada_Controller_V3.2.10_linux_x64_tar |
Descargas | |
|---|---|---|
| Fecha de Publicación : 2020-04-20 | Idioma: Inglés | Tamaño del Archivo : 125.64MB |
Sistema de Operación : Ubuntu 14.04/16.04/17.04/18.04, CentOS 6.x/7.x and Fedora 20 or above, Debian 9.8. |
||
|
Omada_Controller_V3.2.10_Windows32bit |
Descargas | |
|---|---|---|
| Fecha de Publicación : 2020-04-20 | Idioma: Inglés | Tamaño del Archivo : 120.54MB |
Sistema de Operación : Windows 7/8/10/Server |
||
|
Omada_Controller_V3.2.10_Windows64bit |
Descargas | |
|---|---|---|
| Fecha de Publicación : 2020-04-20 | Idioma: Inglés | Tamaño del Archivo : 124.46MB |
Sistema de Operación : Windows 7/8/10/Server |
||
|
Omada_Controller_V3.2.9_linux_x64_deb |
Descargas | |
|---|---|---|
| Fecha de Publicación : 2020-04-09 | Idioma: Inglés | Tamaño del Archivo : 99.39MB |
Sistema de Operación : Ubuntu 14.04/16.04/17.04/18.04/Debian |
||
Omada Discovery Utility
|
Omada Discovery Utility_v2.0.0_Mac |
Descargas | |
|---|---|---|
| Fecha de Publicación : 2018-07-24 | Idioma: Inglés | Tamaño del Archivo : 84.16 MB |
Sistema de Operación : Mac OS X 10.7/10.8/10.9/10.10/10.11 |
||
|
New Feature/Enhancement: |
||
Setup Video
-
How to manage TP-Link EAPs centrally via the Software Controller
This video demonstrates how to manage TP-Link EAPs centrally via the Software Controller. The setup consists of three steps:
• Install the Software
• Configure Discovery Utility (If your EAPs and the Controller Host are on different subnets)
• Configure Software Controller
THIS VIDEO APPLIES TO:
• All TP-Link EAP models (except EAP120 and EAP220)
• Omada Software Controller
• Mass EAPs (usually more than three)
More Fold -
How to set up a TP Link EAP via your mobile phone
This video demonstrates how to set up a TP-Link EAP via your mobile phone. The setup consists of four steps:
• Connect the EAP to the network
• Download the Omada APP
• Connect to the EAP's wireless network
• Set up the EAP using the Omada APP
THIS VIDEO APPLIES TO:
• All TP-Link EAP models. (except EAP120 and EAP220)
• A small number (1-3) of EAPs.
More Fold -
How to setup the Omada Hardware Controller (OC200/OC300) via web browser
This video will demonstrate how to set up OC200/OC300 via web browser. The setup consists of four steps: • Connect the controller to your local network. • Log in with your TP-Link ID. • Add the controller to your TP-Link ID. • Set up the controller THIS VIDEO APPLIES TO: • All TP-Link EAP models (except EAP120 and EAP220) • Omada Hardware Controller (OC200/OC300) • Mass EAPs (usually more than three)
More Fold -
How to setup the Omada Hardware Controller (OC200/OC300) via your mobile phone
This video will demonstrate how to set up OC200/OC300 via your mobile phone. The setup consists of four steps: • Connect the controller to your local network. • Log in with your TP-Link ID. • Add the controller to your TP-Link ID. • Set up the controller THIS VIDEO APPLIES TO: • All TP-Link EAP models (except EAP120 and EAP220) • Omada Hardware Controller (OC200/OC300) • Mass EAPs (usually more than three)
More Fold -
How to manage TP-Link EAPs centrally from a remote place via a web browser
You can manage TP-Link EAPs at any time from anywhere with the Cloud Access function of our Omada Controller Software. This video introduces both the application scenario and concrete steps you can follow. Don't hesitate to give it a try.
THIS VIDEO APPLIES TO:
• All TP-Link EAP models (except EAP120 and EAP220)
• Omada Controller Software (version 3.0.2 or above)
• Mass EAPs (usually more than three)
More Fold -
How to Set up a TP-Link EAP via Web browser
This video will demonstrate how to set up a TP-Link EAP via a web browser. The setup consists of three steps:
1. Connect the EAP to the network
2. Log into the EAP (via a wired/wireless connection)
3. Change the default SSID
This video is suitable for users with a small number (1-3) of EAPs .
More Fold
Preguntas Frecuentes
- API and Code Sample for External Portal Server (Omada Controller 2.5.4 or below)
- API and Code Sample for RADIUS Server with External Web Portal (Omada Controller 3.0.5 or below)
- How to set Access Control to create guest SSID on Omada Controller/EAP
- Should I Keep the Omada Controller Running After Configuration?
- Do I Need to Keep Omada Controller Running When Using Portal Authentication?
- Configuration Guide on EAP-TLS authentication for WPA-Enterprise (with FreeRADIUS)
- How to Change the Default Ports for EAP Controller
- How to build a Campus Network using TP-LINK products
- How to build a Factory Network using TP-Link products
- How to build a Network for Restaurant & Cafe using tp-link products
- How to build a Wireless Network for Chain Store using tp-link products
- How to build a Wireless Network for Dormitory using tp-link products
- How to build a Wireless Network for School Canteen using tp-link products
- How to build a Wireless Network for Shopping Mall using tp-link products
- How to deploy EAP controller on a private cloud (AWS EC2)
- How to configure Link Aggregation for EAP330
- How to set up different SSIDs and Passwords for each EAP through EAP Controller
- How to manage EAPs in different subnets using Omada controller (via EAP Discover Utility) (Old UI)
- How to manage EAPs in different subnets using Omada Controller (via DHCP option 138) (Old UI)
- How to manage EAPs at different sites across Internet using Omada Controller (via VPN Tunnel with EAP Discover Utility) (Old UI)
- How to manage EAPs at different sites across Internet using Omada Controller (via VPN Tunnel with DHCP Option138) (Old UI)
- How to manage EAPs at different sites across Internet using Omada Controller (via NAT Port Forwarding for Controller Host with EAP Discover Utility) (Old UI)
- How to manage EAPs at different sites across Internet using Omada Controller (via NAT Port Forwarding for Controller Host with DHCP Option138) (Old UI)
- How to manage EAPs in different VLANs using Omada Controller (Old UI)
- How to Change the Language of the Printed Voucher Code
- How to Configure Band Steering on TP-Link Omada Controller
- How to Configure Load Balance on Omada Controller
- How to Configure Reboot schedule and Wi-Fi Scheduler function of Omada Controller
- How to view detailed client information of an EAP
- How to Install TP-Link Omada Discovery Utility on Windows and macOS PCs
- How to manage EAPs in different subnets using Omada controller (via EAP Discovery Utility) (New UI)
- How to manage EAPs at different places across Internet using Omada Controller (via NAT Port Forwarding and DHCP Option 138) (New UI)
- How to configure the WLAN Group function on Omada Controller (V3 or below version)
- Explanation of portal authentication failure after EAP is extended with Range Extenders
- How to configure Multiple SSIDs with Multiple Subnets on EAP products
- What is TP-Link EAP Beamforming?
- How to choose EAP products
- How do I find the firmware version of my EAP device?
- How do I upgrade the firmware of my EAP device via web browser?
- Q&A for TP-Link Omada App
- Troubleshooting of Wireless Issues for Omada EAP Products
- How to adopt EAP in Controller Mode?
- How to back up and restore the configuration and data of your Software Controller (or OC200)
- How to Configure Omada Controller as a Windows Service(above Controller 2.5.4)
- How do I login to the web management page of the EAP Series products (Standalone mode)?
- What should I do when the Omada Software Controller (V3 or below) fails to discover the EAP?
- How to manage EAPs at different places across internet using Omada Controller (via NAT Port Forwarding and EAP Discovery Utility)? (New UI)
- How to configure basic wireless settings of my TP-Link EAP in Standalone mode?
- How to configure basic wireless settings of my TP-Link EAP via Omada Controller?
- Common questions about TP-Link EAP device when it’s used in home network
- What is TP-Link EAP/CAP MU-MIMO?
- How to set up rate limit through EAP controller
- What Is the Difference Between Login Account, Cloud Account, Device Account and User Account in Omada Controller?
- How to optimize wireless performance of EAP products
- Configure rogue AP detection on EAP/Omada Controller
- How to configure free authentication policy on EAP Controller
- What is TP-Link EAP/CAP Airtime Fairness?
- How to Manage EAPs at Different Locations
- Hotspot authentication for multiple subnet with different VLANs
Firmware
A firmware update can resolve issues that the previous firmware version may have and improve its current performance.
To Upgrade
IMPORTANT: To prevent upgrade failures, please read the following before proceeding with the upgrade process
- Please upgrade firmware from the local TP-Link official website of the purchase location for your TP-Link device, otherwise it will be against the warranty. Please click here to change site if necessary.
- Please verify the hardware version of your device for the firmware version. Wrong firmware upgrade may damage your device and void the warranty. （Normally V1.x=V1）
¿Cómo encontrar la versión del hardware en un dispositivo TP-Link? - Do NOT turn off the power during the upgrade process, as it may cause permanent damage to the product.
- To avoid wireless disconnect issue during firmware upgrade process, it's recommended to upload firmware with wired connection unless there is no LAN/Ethernet port on your TP-Link device.
- It's recommended that users stop all Internet applications on the computer, or simply disconnect Internet line from the device before the upgrade.
- Use decompression software such as WinZIP or WinRAR to extract the file you download before the upgrade.
|
EAP330(US)_V2_170930 |
Descargas | |
|---|---|---|
| Fecha de Publicación : 2017-09-30 | Idioma: Inglés | Tamaño del Archivo : 7.63 MB |
|
Recommended Controller Software Version: Omada Controller v 2.5.x New Features/Improvements: 1. Support new SMS, Facebook and other authentication methods of Omada Controller 2.5.x. 2. Voucher supports speed limit of clients. Bug Fixed: 1. Web management pages have syntax errors or inconsistent formats 2. EAP330 cannot be managed across different subnets when management VLAN is enabled. Notes: 1. For EAP330 (US) v2 2. Your device's configuration won't be lost after upgrading. |
||
|
EAP330(EU)_V2_170930 |
Descargas | |
|---|---|---|
| Fecha de Publicación : 2017-09-30 | Idioma: Inglés | Tamaño del Archivo : 7.63 MB |
|
Recommended Controller Software Version: Omada Controller v 2.5.x New Features/Improvements: 1. Support new SMS, Facebook and other authentication methods of Omada Controller 2.5.x. 2. Voucher supports speed limit of clients. Bug Fixed: 1. Web management pages have syntax errors or inconsistent formats 2. EAP330 cannot be managed across different subnets when management VLAN is enabled. Notes: 1. For EAP330 (EU) v2 2. Your device's configuration won't be lost after upgrading. |
||
|
EAP330(US)_V2_170515 |
Descargas | |
|---|---|---|
| Fecha de Publicación : 2017-05-15 | Idioma: Inglés | Tamaño del Archivo : 7.60 MB |
|
Recommended Controller Software Version: Omada Controller v 2.4.x New Features/Improvements: 1. Support SSH configuration through Omada Controller. 2. Enhance the stability. Notes: 1. For EAP330 (US)V2. 2. Your device's configuration won't be lost after upgrading. 3. Please do not use a space character in the WPA / WPA2-PSK password, otherwise a software problem may occur. |
||
|
EAP330(US)_V2_161107 |
Descargas | |
|---|---|---|
| Fecha de Publicación : 2016-11-07 | Idioma: Inglés | Tamaño del Archivo : 7.56MB |
|
Modifications and Bug Fixes: First Firmware Released For EAP330 V2 |
||
Usar Firmware de Terceros en los Productos de TP-Link
Algunos firmware oficiales de los productos de TP-Link pueden ser sustituidos por el firmware de terceros como DD-WRT. TP-Link no está obligado a proporcionar el mantenimiento o soporte alguno para los mismos, y no garantiza el desempeño y la estabilidad del firmware de terceros. Los daños al producto como resultado del uso de firmware de terceros, anulará la garantía del producto.
Abrir el Código Fuente Para Programadores (GPL)
La siguiente información es para los programadores y no es necesaria para la mayoría de los usuarios particulares de TP-Link.
Los productos de TP-Link contienen en parte del código del software desarrollado por terceros, incluyendo el código del software sujeto a “GLP” (General Public Licence - Licencia Pública General) de GNU, Versión 1/Versión 2/Versión 3 o "LGPL" (Lesser General Public License – Licencia Pública General Reducida) de GNU. Puede usar la condición del software respectiva siguiendo los términos de la licencia de GPL.
Puede revisar, imprimir y descargar los términos respectivos de la licencia de GPL aquí. Usted recibe los códigos fuente de GPL del respectivo software utilizado en los productos de TP-Link para la descarga directa e información adicional, incluyendo una lista del software de TP-Link que contiene el código del software de GPL por el Centro de Códigos de GPL.
Los programas respectivos son distribuidos SIN NINGUNA GARANTÍA, incluso sin la garantía implícita de COMERCIABILIDAD o IDONEIDAD PARA UN PROPÓSITO PARTICULAR. Vea la Licencia Pública General respectiva de GNU para obtener más detalles.
Emulators
Versión de Firmware |
Working Mode |
Idioma |
|
|---|---|---|---|
170930(EU) |
- |
Inglés |
Note:
1. This Emulator is a virtual web GUI where you can program your TP-Link product firmware. For details about an individual product’s features and specifications please use the search facility and go to the product page.
2. Please check the firmware version corresponds to the version shown on the Emulator interface. Each firmware version has its own GUI and functionality.
3. Please note that not all firmware versions are represented on the Emulator.
Q&A
Feature Configuration Guide
- Introduction of EAP Adoption
- Configuration Guide for Facebook Portal on Omada Controller 2.6.x
- How To Configure Cloud Access for Remote Management
- Methods for Managing the Omada EAPs Network
- Quick Start Guide_Standalone_EAP
- Managing System_Standalone EAP
- Managing EAP_Standalone EAP
- Configuring EAP_Standalone EAP
- Application Example_ Standalone EAP
- Configuration Guide for Facebook Portal on EAP Controller 2.5.x