Descarga para EAP110-Outdoor
Punto de Acceso Exterior Inalámbrico N de 300Mbps Controller Software
The EAP Controller is used to manage multiple EAPs intensively.
|
Omada_Controller_V3.2.10_linux_x64_deb |
Descargas | |
|---|---|---|
| Fecha de Publicación : 2020-04-20 | Idioma: Inglés | Tamaño del Archivo : 99.4MB |
Sistema de Operación : Ubuntu 14.04/16.04/17.04/18.04/Debian 9.8 |
||
|
Omada_Controller_V3.2.10_linux_x64_tar |
Descargas | |
|---|---|---|
| Fecha de Publicación : 2020-04-20 | Idioma: Inglés | Tamaño del Archivo : 125.64MB |
Sistema de Operación : Ubuntu 14.04/16.04/17.04/18.04, CentOS 6.x/7.x and Fedora 20 or above, Debian 9.8. |
||
|
Omada_Controller_V3.2.10_Windows32bit |
Descargas | |
|---|---|---|
| Fecha de Publicación : 2020-04-20 | Idioma: Inglés | Tamaño del Archivo : 120.54MB |
Sistema de Operación : Windows 7/8/10/Server |
||
|
Omada_Controller_V3.2.10_Windows64bit |
Descargas | |
|---|---|---|
| Fecha de Publicación : 2020-04-20 | Idioma: Inglés | Tamaño del Archivo : 124.46MB |
Sistema de Operación : Windows 7/8/10/Server |
||
|
Omada_Controller_V3.2.9_linux_x64_deb |
Descargas | |
|---|---|---|
| Fecha de Publicación : 2020-04-09 | Idioma: Inglés | Tamaño del Archivo : 99.39MB |
Sistema de Operación : Ubuntu 14.04/16.04/17.04/18.04/Debian |
||
Omada Discovery Utility
|
Omada Discovery Utility_v2.0.0_Mac |
Descargas | |
|---|---|---|
| Fecha de Publicación : 2018-07-24 | Idioma: Inglés | Tamaño del Archivo : 84.16 MB |
Sistema de Operación : Mac OS X 10.7/10.8/10.9/10.10/10.11 |
||
|
New Feature/Enhancement: |
||
Setup Video
-
How to Set up a TP-Link EAP via Web browser
This video will demonstrate how to set up a TP-Link EAP via a web browser. The setup consists of three steps:
1. Connect the EAP to the network
2. Log into the EAP (via a wired/wireless connection)
3. Change the default SSID
This video is suitable for users with a small number (1-3) of EAPs .
More Fold
Preguntas Frecuentes
- How to configure Fast Roaming on Omada Controller
- How to configure SSID VLAN on Omada AP with Third-Party Gateway
- How do I configure 802.11 Rate Control on the Omada Controller
- Should I keep the Omada Controller running after configuration?
- Getting started with the standalone EAP
- What can I do If Omada App can’t find my AP
- How to get sarted with Standalone Access Points without Omada Controller
- How to configure abnormal on Omada Pro Controller
- Understanding and implementing Minimum RSSI
- Configure rogue AP detection on EAP/Omada Controller
- How to Change the Default Ports for EAP Controller
- Typical SSH commands for Omada AP troubleshooting
- How to configure Multicast Filtering on Omada Controller
- How to choose EAP products
- How to build a Factory Network using TP-Link products
- How to build a Network for Restaurant & Cafe using tp-link products
- How to build a Campus Network using TP-LINK products
- How to build a Wireless Network for Chain Store using tp-link products
- How to build a Wireless Network for Dormitory using tp-link products
- How to build a Wireless Network for School Canteen using tp-link products
- How to build a Wireless Network for Shopping Mall using tp-link products
- Troubleshooting guide of roaming
- Troubleshooting guide of common wireless issues
- How to downgrade firmware of EAP if it is abnormal after the update
- Overview of Omada EAP Power Supply
- What should I do when the Omada Software Controller (V4) fails to discover the devices?
- Common questions about TP-Link EAP device when it’s used in home network
- What should I do when the Omada Software Controller (V3 or below) fails to discover the EAP?
- Troubleshooting of wireless issues for Omada EAP products
- How to view detailed client information of an EAP
- What can I do if I fail to log in to the EAP via the domain name?
- How do I upgrade the firmware of my EAP device via web browser?
- What is TP-Link EAP/CAP MU-MIMO?
- What is TP-Link EAP Beamforming?
- What is TP-Link EAP/CAP Airtime Fairness?
- Q&A for TP-Link Omada App
- Frequently Asked Questions about EAP Outdoor Products
- Getting started without an Omada Controller
- How to configure Management VLANs for Omada Switches and APs (for SOHO scenario)
- How to configure Management VLANs for Omada Switches and APs (for Business scenario)
- Basic introduction to AP Mesh and Fast Roaming
- Why my clients don't roam or connect to the nearest AP
- Do I need to keep Omada Controller running when using portal authentication?
- What Is the difference between Login Account, Cloud Account, Device Account and User Account in Omada Controller?
- Troubleshooting for Wireless Client Cannot Access the Internet
- Unable to connect to EAP WiFi
- How to optimize wireless performance of EAP products
- How do I find the firmware version of my EAP device?
- Announcement on Discontinuation of Facebook Wi-Fi
- API and Code Sample for External Portal Server (Omada Controller 2.6.0 to 3.2.17)
- API and Code Sample for External Portal Server (Omada Controller 2.5.4 or below)
- API and Code Sample for RADIUS Server with External Web Portal (Omada Controller 3.0.5 or below)
- How to set Access Control to create guest SSID on Omada Controller/EAP
- How to configure Management VLAN in Standalone mode for EAP
- Configuration Guide on EAP-TLS authentication for WPA-Enterprise (with FreeRADIUS)
- How to deploy EAP controller on a private cloud (AWS EC2)
- How to set up different SSIDs and Passwords for each EAP through EAP Controller
- How to manage EAPs in different subnets using Omada controller (via EAP Discover Utility) (Old UI)
- How to manage EAPs in different subnets using Omada Controller (via DHCP option 138) (Old UI)
- How to manage EAPs at different sites across Internet using Omada Controller (via VPN Tunnel with EAP Discover Utility) (Old UI)
- How to manage EAPs at different sites across Internet using Omada Controller (via VPN Tunnel with DHCP Option138) (Old UI)
- How to manage EAPs at different sites across Internet using Omada Controller (via NAT Port Forwarding for Controller Host with EAP Discover Utility) (Old UI)
- How to manage EAPs at different sites across Internet using Omada Controller (via NAT Port Forwarding for Controller Host with DHCP Option138) (Old UI)
- How to manage EAPs in different VLANs using Omada Controller (Old UI)
- How to Change the Language of the Printed Voucher Code
- How to Configure Band Steering on TP-Link Omada Controller
- How to Configure Load Balance on Omada Controller
- How to Configure Reboot schedule and Wi-Fi Scheduler function of Omada Controller
- How to Install TP-Link Omada Discovery Utility on Windows and macOS PCs
- How to manage EAPs in different subnets using Omada controller (via EAP Discovery Utility) (New UI)
- How to manage EAPs at different places across Internet using Omada Controller (via NAT Port Forwarding and DHCP Option 138) (New UI)
- How to configure the WLAN Group function on Omada Controller (V3 or below version)
- How to configure Multiple SSIDs with Multiple Subnets on EAP products
- How to adopt EAP in Controller Mode?
- How to back up and restore the configuration and data of your Software Controller (or OC200)
- How to Configure Omada Controller as a Windows Service(above Controller 2.5.4)
- How do I login to the web management page of the EAP Series products (Standalone mode)?
- Source code template for External Web Portal (Standalone Mode)
- How to manage EAPs at different places across internet using Omada Controller (via NAT Port Forwarding and EAP Discovery Utility)? (New UI)
- How to configure basic wireless settings of my TP-Link EAP in Standalone mode?
- How to configure basic wireless settings of my TP-Link EAP via Omada Controller?
- How to set up rate limit through EAP controller
- How to configure free authentication policy on EAP Controller
- How to Manage EAPs at Different Locations
- Hotspot authentication for multiple subnet with different VLANs
Firmware
A firmware update can resolve issues that the previous firmware version may have and improve its current performance.
To Upgrade
IMPORTANT: To prevent upgrade failures, please read the following before proceeding with the upgrade process
- Please upgrade firmware from the local TP-Link official website of the purchase location for your TP-Link device, otherwise it will be against the warranty. Please click here to change site if necessary.
- Please verify the hardware version of your device for the firmware version. Wrong firmware upgrade may damage your device and void the warranty. （Normally V1.x=V1）
¿Cómo encontrar la versión del hardware en un dispositivo TP-Link? - Do NOT turn off the power during the upgrade process, as it may cause permanent damage to the product.
- To avoid wireless disconnect issue during firmware upgrade process, it's recommended to upload firmware with wired connection unless there is no LAN/Ethernet port on your TP-Link device.
- It's recommended that users stop all Internet applications on the computer, or simply disconnect Internet line from the device before the upgrade.
- Use decompression software such as WinZIP or WinRAR to extract the file you download before the upgrade.
|
EAP110-Outdoor(US)_V1_1.2.0 Build 20180418 |
Descargas | |
|---|---|---|
| Fecha de Publicación : 2018-04-28 | Idioma: Inglés | Tamaño del Archivo : 7.06 MB |
|
Recommended Controller Software Version: Omada Controller v 2.6.x or above
New Features/Improvements: 1. Management mechanism changing: In standalone mode, only one user is allowed to login the management page of the EAP at the same time. 2. Supports HTTPS redirection of portal authentication page. 3. Facebook Portal now intercepts HTTPS access unless you pass the authentication. 4. Omada Controller will create Free Authentication Policy for the External Web Portal Server and External Portal Server automatically. 5. Supports rate limit function for a single client. (If you have set SSID, Client, Voucher rate limit at the same time, and the minimum limit value will take effect.) 6. Restricts local resources access of wireless clients which did not pass the authentication. 7. Decreased the synchronization update time of Omada Controller when the IP address of EAP is changed. 8. EAP will report Client RSSI information to Omada Controller. 9. Optimized Rouge AP detection process. 10. Changed the selecting range of auto channel of 2.4G radio to non-overlapping channel 1/6/11
Bug Fixed: 1. Fixed the incorrect IP address displaying of some clients in Omada Controller. 2. Fixed the bug that clients may still be able to connect with EAP after blocking the clients in clients list. 3. Fixed the bug that SSID rate limit configuration may not take effect if it is configured when wireless radio is turned off.
Notes: 1. For EAP110-Outdoor (US)_V1 only. 2. If you managed EAP by Omada Controller, you can’t manage this EAP by Web management page, unless you have reset the EAP. 3. Your device's configuration won't be lost after upgrading. |
||
|
EAP110-Outdoor(EU)_V1_1.2.0 Build 20180418 |
Descargas | |
|---|---|---|
| Fecha de Publicación : 2018-04-28 | Idioma: Inglés | Tamaño del Archivo : 7.06 MB |
|
Recommended Controller Software Version: Omada Controller v 2.6.x or above |
||
|
EAP110-Outdoor(EU)_V1_170914 |
Descargas | |
|---|---|---|
| Fecha de Publicación : 2017-09-17 | Idioma: Inglés | Tamaño del Archivo : 6.79 MB |
|
Recommended Controller Software Version: Omada Controller v 2.5.x |
||
|
EAP110-Outdoor(US)_V1_170914 |
Descargas | |
|---|---|---|
| Fecha de Publicación : 2017-09-14 | Idioma: Inglés | Tamaño del Archivo : 6.79MB |
|
Recommended Controller Software Version: Omada Controller v 2.5.x New Features/Improvements: 1. Support new SMS, Facebook and other authentication methods of Omada Controller v2.5.x. 2. Voucher supports speed&traffic limit of wireless clients. Bug Fixed: Fixed the bug that EAP110-Outdoor will automatically restart when XiaoMi cellphone connects to the SSID with Voucher Authentication enabled. Notes: 1. For EAP110-Outdoor v1 2. Your device's configuration won't be lost after upgrading |
||
|
EAP110-Outdoor(US)_V1_161109 |
Descargas | |
|---|---|---|
| Fecha de Publicación : 2016-11-09 | Idioma: Inglés | Tamaño del Archivo : 6.74 MB |
|
Recommended Controller Software Version: Omada Controller v 2.4.x New Features/Improvements: 1. Improve the wireless stability of EAP110-Outdoor. 2. Support both IP and subnet mask configuration method for Get Source/Set Source of SNMP Notes: 1. For EAP110-Outdoor v1 2. Your device's configuration won't be lost after upgrading |
||
|
EAP110-Outdoor(EU)_V1_161109 |
Descargas | |
|---|---|---|
| Fecha de Publicación : 2016-11-09 | Idioma: Inglés | Tamaño del Archivo : 6.74 MB |
|
Recommended Controller Software Version: Omada Controller v 2.4.x |
||
|
EAP110-Outdoor(US)_V1_161013 |
Descargas | |
|---|---|---|
| Fecha de Publicación : 2016-10-13 | Idioma: Inglés | Tamaño del Archivo : 6.73 MB |
|
Modifications and Bug Fixes: First Firmware Released. |
||
|
EAP110-Outdoor(EU)_V1_160923 |
Descargas | |
|---|---|---|
| Fecha de Publicación : 2016-09-23 | Idioma: Inglés | Tamaño del Archivo : 6.74 MB |
|
Recommended Controller Software Version: Omada Controller v 2.4.x New Features/Improvements: First Firmware Released. Notes: For EAP110-Outdoor v1 |
||
Usar Firmware de Terceros en los Productos de TP-Link
Algunos firmware oficiales de los productos de TP-Link pueden ser sustituidos por el firmware de terceros como DD-WRT. TP-Link no está obligado a proporcionar el mantenimiento o soporte alguno para los mismos, y no garantiza el desempeño y la estabilidad del firmware de terceros. Los daños al producto como resultado del uso de firmware de terceros, anulará la garantía del producto.
Abrir el Código Fuente Para Programadores (GPL)
La siguiente información es para los programadores y no es necesaria para la mayoría de los usuarios particulares de TP-Link.
Los productos de TP-Link contienen en parte del código del software desarrollado por terceros, incluyendo el código del software sujeto a “GLP” (General Public Licence - Licencia Pública General) de GNU, Versión 1/Versión 2/Versión 3 o "LGPL" (Lesser General Public License – Licencia Pública General Reducida) de GNU. Puede usar la condición del software respectiva siguiendo los términos de la licencia de GPL.
Puede revisar, imprimir y descargar los términos respectivos de la licencia de GPL aquí. Usted recibe los códigos fuente de GPL del respectivo software utilizado en los productos de TP-Link para la descarga directa e información adicional, incluyendo una lista del software de TP-Link que contiene el código del software de GPL por el Centro de Códigos de GPL.
Los programas respectivos son distribuidos SIN NINGUNA GARANTÍA, incluso sin la garantía implícita de COMERCIABILIDAD o IDONEIDAD PARA UN PROPÓSITO PARTICULAR. Vea la Licencia Pública General respectiva de GNU para obtener más detalles.