Download for T2600G-28TS V4

Please choose hardware version:

V4

>How to find the hardware version on a TP-Link device

IMPORTANT: Model and hardware version availability varies by region. Please refer to your TP-Link regional website to determine product availability.
Product Overview
Manual

MIBs Files

T2600G-28TS(UN)_v4_MIB_20190530

Download
Published Date: 2019-09-25 Language: English File Size: 200.33 KB
Operating System: Win2000/XP/2003/Vista/7/8/8.1/10/Mac/Linux

T2600G-28TS(UN)_V4_MIB_20181010

Download
Published Date: 2019-05-13 Language: English File Size: 206.12 KB
Operating System: Win2000/XP/2003/Vista/7/8/8.1/10/Mac/Linux

802.1X Client

TP-LINK_802.1X_Client_Software

Download
Published Date: 2017-09-05 Language: English File Size: 5.5MB
Operating System: Win2000/XP/2003/Vista/7/8/8.1/10

FAQs

Firmware

A firmware update can resolve issues that the previous firmware version may have and improve its current performance.

To Upgrade

IMPORTANT: To prevent upgrade failures, please read the following before proceeding with the upgrade process

  • Please upgrade firmware from the local TP-Link official website of the purchase location for your TP-Link device, otherwise it will be against the warranty. Please click here to change site if necessary.
  • Please verify the hardware version of your device for the firmware version. Wrong firmware upgrade may damage your device and void the warranty. (Normally V1.x=V1)
    How to find the hardware version on a TP-Link device
  • Do NOT turn off the power during the upgrade process, as it may cause permanent damage to the product.
  • To avoid wireless disconnect issue during firmware upgrade process, it's recommended to upload firmware with wired connection unless there is no LAN/Ethernet port on your TP-Link device.
  • It's recommended that users stop all Internet applications on the computer, or simply disconnect Internet line from the device before the upgrade.
  • Use decompression software such as WinZIP or WinRAR to extract the file you download before the upgrade.

T2600G-28TS(UN)_V4_20200110

Download
Published Date: 2020-04-15 Language: English File Size: 17.14 MB

Modifications and Bug Fixes:
Fix the bug that CPU will reach 90% if close the telnet connection when changing the password for first logining switch through telnet.

Notes:
1. For T2600G-28TS(UN) V4.0.
2. Your device's configuration will not be lost after upgrading, which means you don't need to configure your device again after upgrading.

T2600G-28TS(UN)_V4_20191112

Download
Published Date: 2019-12-31 Language: English File Size: 17.14 MB

New Features/Enhancements:
1. Add the feature that needs to change the password when login for the first time.
2. Add the feature that can choose not to change the IP address when resetting the switch.
3. Add "service reset-disable" for removing reset option from Bootutil.
4. Add built-in Telnet client which allows the switch can telnet other devices.
5. Allow disabling HTTP and HTTPS for access types at the same time.
6. Optimize the password character set to support more special characters.
7. Optimize the BPDU Filter feature to make ports not send out BPDU packets when BPDU Filter is enabled. 
8. Optimized the CLI display of MVR configurations.
9. Support to display MVR members of inactive and active groups.
10. Support to view/clear mac-address table on port/VLAN.
11. Support to fill in file name with folder path when using SNMP or CLI to upgrade firmware or restore config file through TFTP.
Notes:
1. For T2600G-28TS(UN) V4.0
2. Your device's configuration will not be lost after upgrading, which means you don't need to configure your device again after upgrading.
3. After upgrading, it cannot downgrade to the old version firmware because of the encryption rule has changed.

T2600G-28TS(UN)_V4_20190530

Download
Published Date: 2019-07-11 Language: English File Size: 17.10 MB

Modifications and Bug Fixes:
1. Update HTTPS to support TLS1.2.
2. Fix the bug that the settings of SNMP Community/Notification/Trap will lose after rebooting the switch when turning off the global switch of SNMP function. 
3.Fix the bug that the IP in circuit-ID is wrong when the VLANs which the port belong to does not set up the interface and PPPoE IP insertion is IP mode.
4. Fix the bug that NTP server will be changed when setting up only one NTP server and fail to get the time.
5. Fix the bug that cannot set up auto mode for fibre ports which in the port channel. 
6. Fix the bug that access control entries will not take effect when two or more entries are added for port binding.

Notes:
For T2600G-28TS(UN) V4.0.

To Use Third Party Firmware In TP-Link Products

Some official firmware of TP-Link products can be replaced by the third party firmware such as DD-WRT. TP-Link is not obligated to provide any maintenance or support for it, and does not guarantee the performance and stability of third party firmware. Damage to the product as a result of using third party firmware will void the product's warranty.

Open Source Code For Programmers (GPL)

Please note: The products of TP-Link partly contain software code developed by third parties, including software code subject to the GNU General Public Licence (“GPL“), Version 1/Version 2/Version 3 or GNU Lesser General Public License ("LGPL"). You may use the respective software condition to following the GPL licence terms.

You can review, print and download the respective GPL licence terms here. You receive the GPL source codes of the respective software used in TP-Link products for direct download and further information, including a list of TP-Link software that contain GPL software code under GPL Code Center.

The respective programs are distributed WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the respective GNU General Public License for more details.

Emulators

Firmware Version
Working Mode
Language
180322(UN)
-
English

Note:

1. This Emulator is a virtual web GUI where you can program your TP-Link product firmware. For details about an individual product’s features and specifications please use the search facility and go to the product page.

2. Please check the firmware version corresponds to the version shown on the Emulator interface. Each firmware version has its own GUI and functionality.

3. Please note that not all firmware versions are represented on the Emulator.

From United States?

Get products, events and services for your region.