How to connect TP-Link router with Starlink

Configuration Guide
Updated 06-20-2023 07:07:12 AM 365993
This Article Applies to: 

There are two generations of Starlink Satellite Dish: The Gen-1 Terminal (Circular Dish) and the Gen-2 Terminal (Rectangular Dish). The main difference between the two versions is the removal of the Ethernet Jack. So with a Gen-2 Terminal, you must purchase an Ethernet Adapter from Starlink first to allow for a wired connection to the network.

Head below to learn how to connect the TP-Link router to the Starlink Terminal.

For the updated Gen-2 Starlink User Terminal

Unlike the Original Starlink Terminal, the Gen-2 Dish is Rectangular, and no PoE adapter is included. The Rectangular Dish will be directly powered by the Gen-2 Starlink router. Since there is no more Ethernet jack on the Gen-2 Starlink router, you must purchase an Ethernet Adapter from Starlink to Connect the TP-Link router.

  • Connect the TP-Link router together with the Gen-2 Starlink router

Gen-2 Starlink router supports Bypass mode that will completely disable the built-in Starlink WiFi router functionality. A factory reset is required if you want to switch back to router mode. So when the TP-Link router is connected to the Ethernet adapter, there are two recommended setups.

  1. Enable Bypass mode on Starlink APP under Settings > Advanced, then set up the TP-Link router in Wireless Router mode.

https://static.tp-link.com/upload/faq/image-20230512193923-4_20230512113925q.jpeg

  1. Leave Bypass mode disabled on Starlink APP, then set up the TP-Link router in Access Point mode.

For the original Gen-1 Starlink User Terminal

  • Connect the TP-Link router without the Gen-1 Starlink router

Go through this FAQ to set up the TP-Link router.

  • Connect the TP-Link router together with Gen-1 Starlink router

On this network topology, please connect the TP-Link router to the AUX port of the Gen-1 Starlink Router. To avoid double NAT, it is suggested to change the TP-Link router into Access Point mode.

Follow this guide to change the TP-Link router into Access Point mode.

For any further inquiries about the TP-Link router setup or configuration with Starlink, please contact our technical support.

Is this faq useful?

Your feedback helps improve this site.

From United States?

Get products, events and services for your region.