How to configure 802.1Q VLAN on Smart and Managed switches using the new GUI

Configuration Guide
Actualizado06-27-2022 06:33:33 AM 161126
Este artículo se aplica a: 

VLAN (Virtual Local Area Network) is a technology that can solve broadcasting issues. A LAN can be divided into several VLANs logically, and only the hosts in a same VLAN can communicate with each other.

Here is a configuration example for 802.1Q VLAN.

Network Topology:

Network Requirement:

  • Hosts in the same department can communicate with each other.
  • Hosts in different departments cannot communicate with each other.
  • Both department A and department B can visit the FTP server.

Configuration Scheme:

  • Create VLAN 10 and VLAN 20 for department A and department B respectively.
  • Create VLAN 30 for the FTP server, and add the hosts in department A and department B to VLAN 30.
  • Configure PVIDs for ports. With correct PVID settings, both department A and department B can visit the FTP server, but cannot communicate with each other.

VLAN Configurations on Switch 1 and Switch 2:

VLAN 10

VLAN 20

VLAN 30

Switch 1

Port 1-2

Port 1, 3

Port 1-3

Switch 2

Port 1-2, 4

Port 1, 3-4

Port 1-4

Egress Rule and PVID settings for Switch 1 and Switch 2:

Switch

Switch 1

Switch 2

Port

1

2

3

1

2

3

4

Egress Rule

Tagged

Untagged

Untagged

Tagged

Untagged

Untagged

Untagged

PVID

1

10

20

1

10

20

30

Configurations on Switch 1:

Step 1

Go to L2 Features > VLAN > 802.1Q VLAN > VLAN Config, create VLAN 10, VLAN 20 and VLAN 30; add Untagged port 2 and Tagged port 1 to VLAN 10; add Untagged port 3 and Tagged port 1 to VLAN 20; add Untagged port 2-3 to VLAN 30 and Tagged port 1 to VLAN 30.

Step 2

Go to L2 Features > VLAN > 802.1Q VLAN > Port Config, set the PVID value as 1, 10, 20 for port 1, port 2 and port 3 respectively.

Configurations on Switch 2:

Step 1

Go to L2 Features > VLAN > 802.1Q VLAN > VLAN Config, create VLAN 10, VLAN 20 and VLAN 30; add Untagged port 2, Untagged port 4 and Tagged port 1 to VLAN 10; add Untagged port 3, Untagged port 4 and Tagged port 1 to VLAN 20; add Untagged port 2-4 to VLAN 30 and Tagged port 1 to VLAN 30.

Step 2

Go to L2 Features > VLAN > 802.1Q VLAN > Port Config, set the PVID value as 1, 10, 20 and 30 for port 1, port 2, port 3 and port 4 respectively.

Looking for More

¿Es útil esta pregunta frecuente?

Sus comentarios nos ayudan a mejorar este sitio.

Desde United States?

Obtenga productos, eventos y servicios para su región.