Descarga para TL-ER6020 V2

Elija la versión de hardware:

V2

>¿Cómo encontrar la versión de hardware en un dispositivo TP-Link?

IMPORTANTE : la disponibilidad del modelo y la versión de hardware varía según la región. Consulte su sitio web regional de TP-Link para determinar la disponibilidad del producto.
Descripción del producto
Manual

IPSec VPN Cliente Software

IPSec VPN Client

Descargar
Fecha de Publicación: 2017-08-11 Idioma: Inglés Tamaño del archivo: 5.81 MB
Sistema operativo: Win2000/XP/2003/Vista/7

FAQs

Firmware

A firmware update can resolve issues that the previous firmware version may have and improve its current performance.

To Upgrade

IMPORTANT: To prevent upgrade failures, please read the following before proceeding with the upgrade process

  • Please upgrade firmware from the local TP-Link official website of the purchase location for your TP-Link device, otherwise it will be against the warranty. Please click here to change site if necessary.
  • Please verify the hardware version of your device for the firmware version. Wrong firmware upgrade may damage your device and void the warranty. (Normally V1.x=V1)
    ¿Cómo encontrar la versión de hardware en un dispositivo TP-Link?
  • Do NOT turn off the power during the upgrade process, as it may cause permanent damage to the product.
  • To avoid wireless disconnect issue during firmware upgrade process, it's recommended to upload firmware with wired connection unless there is no LAN/Ethernet port on your TP-Link device.
  • It's recommended that users stop all Internet applications on the computer, or simply disconnect Internet line from the device before the upgrade.
  • Use decompression software such as WinZIP or WinRAR to extract the file you download before the upgrade.

TL-ER6020(UN)_V2_ 20200623

Descargar
Fecha de Publicación: 2020-08-24 Idioma: Inglés Tamaño del archivo: 11.74 MB

New Feature/Enhancement:

1.  Upgrade webserver's HTTPS encryption suite TLS version to 1.2.

2.  Add support DHCP Option 66, Option 150, Option 159, Option 160, Option 176 and Option 242.

3.  One-to-One NAT supports the loopback function of the WAN port.

4.  Add HTTPS web server enable/disable button.

5.  Support to obtain SNMP information through WAN port and VPN connection.

6.  Support forward IPv4 Local Scope IP address as 239.255.0.0/16.

7.  Optimize the mechanism of the session limit function.

8.  Firewall optimization for PCI DSS vulnerability scanning.

9.  Optimized the MAC address (WAN/LAN port) modification mechanism. If the MAC address in the backup file is not modified, the device will keep the default MAC address after restoring the backup file.

10.  Optimize the DHCP Server mechanism, LAN devices can obtain IP addresses faster.

11.  UPnP supports adding random codes to URL to prevent DNS Rebinding attacks.

12.  Daylight saving time is adjusted from GMT to UTC.

13.  Security vulnerability optimization.

 

Bug Fixed:

1.  Fix the bug that URL Filtering is unsuccessful when accessing a website subdirectory with “/”.

2.  Fix the bug that the backup WAN port will not restore PPPoE dialing automatically when deleting the Link Backup entries.

3.  Fix the bug that LAN PC may not be able to upload data to an external server.

4.  Fix the bug that the UPnP NewExternalIPAddress interface cannot correctly obtain the IP address of WAN port.

5.  Fix the bug that VPN cannot be used after creating multiple IPSec VPN entries.

6.  Fix the bug that the VPN cannot be used normally after opening the DMZ function.

7.  Fix the bug that the VPN clients at both ends of the IPSec VPN may not be able to communicate with each other after restarting the router or modifying the WAN mode.

8. Fix the bug that two clients located behind the same NAT device cannot build L2TP over IPsec VPN with ER 6120v2 at the same time.

Notes:

1. For TL-ER6020 (UN) 2.0 only.

2. Your device's configuration won't be lost after upgrading.

TL-ER6020(UN)_V2_20180702

Descargar
Fecha de Publicación: 2018-08-10 Idioma: Inglés Tamaño del archivo: 11.70 MB

Modifications and Bug Fixes:
1. Fix DHCP server will hang when modifying it after assigning IP to clients with the same name;
2. Enhance the Firewall module for VPN;
3. Fix bugs that it cannot establish L2TP over IPsec VPN connection when NAT exists;
4. Enhanced contents of System Log module;
5. Improve Dynamic DNS could create multi domain entries for one account;
6. Enhance the stability and speed up the dial process of WAN;
7. Add multi WANs selection for NAT/Policy Routing/primary WAN of Link Backup;
8. Add Only, Priority two modes for Policy Routing feature;
9. Add two sub-modes of Failover mode for Link Backup feature;
10. IP-MAC Binding entries will no longer take effect when ARP Spoofing Defense is disabled. 
Notes:
For TL-ER6020 V2.0

TL-ER6020(UN)_V2_20180211

Descargar
Fecha de Publicación: 2018-02-28 Idioma: Inglés Tamaño del archivo: 11.67 MB

Modifications and Bug Fixes
1. Fix the problem of static routing can't work via LAN interface.
2. Fix the DNS or routing table problem when using the Link Backup.
3. Fix the problem of cannot open the Web interface of the other side via IPSec VPN tunnel.
4. Fix the problem of L2TP over IPSec VPN might be down when transmitting large files via VPN tunnel.
5. Fix the problem of DHCP Server might crash when there are some clients with same in the LAN.
6. Fix the problem of WAN1 traffic statistics can't work when the IPTV enabled.
7. Enhanced the stability of the router.
8. Reduce the time from WAN interface get IP to get to the internet.
9. Add the function of importing all at the page of ARP scaning.

Usar Firmware de Terceros en los Productos de TP-Link

 

Algunos firmware oficiales de los productos de TP-Link pueden ser sustituidos por el firmware de terceros como DD-WRT. TP-Link no está obligado a proporcionar el mantenimiento o soporte alguno para los mismos, y no garantiza el desempeño y la estabilidad del firmware de terceros. Los daños al producto como resultado del uso de firmware de terceros, anulará la garantía del producto.

 

Abrir el Código Fuente Para Programadores (GPL)

 

La siguiente información es para los programadores y no es necesaria para la mayoría de los usuarios particulares de TP-Link.

 

Los productos de TP-Link contienen en parte del código del software desarrollado por terceros, incluyendo el código del software sujeto a “GLP” (General Public Licence - Licencia Pública General) de GNU, Versión 1/Versión 2/Versión 3 o "LGPL" (Lesser General Public License – Licencia Pública General Reducida) de GNU. Puede usar la condición del software respectiva siguiendo los términos de la licencia de GPL.

 

Puede revisar, imprimir y descargar los términos respectivos de la licencia de GPL aquí. Usted recibe los códigos fuente de GPL del respectivo software utilizado en los productos de TP-Link para la descarga directa e información adicional, incluyendo una lista del software de TP-Link que contiene el código del software de GPL por el Centro de Códigos de GPL.

 

Los programas respectivos son distribuidos SIN NINGUNA GARANTÍA, incluso sin la garantía implícita de COMERCIABILIDAD o IDONEIDAD PARA UN PROPÓSITO PARTICULAR. Vea la Licencia Pública General respectiva de GNU para obtener más detalles.

  

Código GPL

Simulador

Firmware Version
Modo de trabajo
Idioma
171222
-
Inglés

Note:

1. This Emulator is a virtual web GUI where you can program your TP-Link product firmware. For details about an individual product’s features and specifications please use the search facility and go to the product page.

2. Please check the firmware version corresponds to the version shown on the Emulator interface. Each firmware version has its own GUI and functionality.

3. Please note that not all firmware versions are represented on the Emulator.

Desde United States?

Obtenga productos, eventos y servicios para su región.