How to Connect Your Wireless Devices to the Range Extender via WPS as AP mode (Blue UI)

Configuration Guide
Updated 06-28-2022 02:42:42 AM 88557
This Article Applies to: 

Wi-Fi Protected Setup (WPS) provides an easier approach to set up a security-protected Wi-Fi connection.

Wireless devices that support WPS, including Android phones, tablets, most USB network cards, can be connected to your extender through this method (not supported by iOS devices).

1. Visit http://tplinkrepeater.net, and log in with the username and password you set for the extender.

2. Go to Settings > Wireless > WPS.

3. Enable WPS.

4. Connect via WPS:

  • AP’s PIN: Enable AP’s PIN and enter the PIN on your device. You can click Generate to get a new PIN or click Default to restore the PIN to its factory one.

  • Push Button (Recommended): Click Connect and push the WPS button on the client device.

  • PIN code: Enter the client’s PIN, and click Connect.

Get to know more details of each function and configuration please go to Download Center to download the manual of your product.

Is this faq useful?

Your feedback helps improve this site.

From United States?

Get products, events and services for your region.